NHTSA recall 09V414000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 09V414000 |
| Manufacturer | MAZDA MOTOR CORP |
| Reported | 2009-10-23 |
| Owners notified | 2009-12-11 |
| Component | VEHICLE SPEED CONTROL:CRUISE CONTROL |
| Units potentially affected | 39600 |
What is wrong
MAZDA IS RECALLING MODEL YEAR 1995 THROUGH 1997 AND MODEL YEAR 2001 THROUGH 2003 TRUCKS EQUIPPED WITH TEXAS INSTRUMENTS SPEED CONTROL DEACTIVATION SWITCH (SCDS) AND/OR ANTI-LOCK BRAKE SYSTEM (ABS) AND MANUFACTURED ON OR BEFORE DECEMBER 5, 2002. A COMPONENT OF THE CRUISE CONTROL DEACTIVATION SWITCH MAY DETERIORATE OVER TIME AND DEVELOP A LEAK. THIS OCCURRENCE COULD CAUSE THE SWITCH TO OVERHEAT, SMOKE OR BURN WHICH COULD RESULT IN AN UNDER HOOD FIRE.
What can happen
A VEHICLE FIRE COULD OCCUR WITH OR WITHOUT THE ENGINE RUNNING.
The remedy
MAZDA WILL NOTIFY OWNERS THAT DEALERS WILL INSTALL A UNIVERSAL FUSED JUMPER HARNESS ON THE CRUISE CONTROL DEACTIVATION SWITCH FREE OF CHARGE. THE SAFETY RECALL BEGAN ON DECEMBER 11, 2009. OWNERS MAY CONTACT MAZDA AT 1-800-222-5500 OPTION #6.
Notes
OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .
| 1995 MAZDA B-SERIES TRUCK | Built 1994-11-28 to 1997-06-01. Listed as a series or trim of this model. |
|---|---|
| 1996 MAZDA B-SERIES TRUCK | Built 1994-11-28 to 1997-06-01. Listed as a series or trim of this model. |
| 1997 MAZDA B-SERIES TRUCK | Built 1994-11-28 to 1997-06-01. Listed as a series or trim of this model. |
| 2001 MAZDA B-SERIES TRUCK | Built 2000-06-21 to 2001-07-31. Listed as a series or trim of this model. |
| 2002 MAZDA B-SERIES TRUCK | Built 2001-08-06 to 2002-07-31. Listed as a series or trim of this model. |
| 2003 MAZDA B-SERIES TRUCK | Built 2002-08-02 to 2002-12-05. Listed as a series or trim of this model. |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| 09-002-21-3770 | 2021-02-05. Service bulletin. In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer |
|---|---|
| 09-034-18-3430a | 2018-11-13. Service bulletin. In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense. |
| 09-034-18-3430 | 2018-09-10. Service bulletin. In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after-warranty assistance (AWA) or DSA that can be utilized to cover this service expense. |
| 0100102 | 2002-09-28. Service bulletin. SOME VEHICLES MAY EXHIBIT AN INABILITY TO REACH WIDE OPEN THROTTLE. *SLC |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.