NHTSA recall 05V162000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 05V162000 |
| Manufacturer's number | R847 |
| Manufacturer | JAGUAR CARS LTD |
| Reported | 2005-04-20 |
| Owners notified | 2005-08-11 |
| Component | VEHICLE SPEED CONTROL:ACCELERATOR PEDAL |
| Units potentially affected | 659 |
What is wrong
ON CERTAIN PASSENGER VEHICLES, THE ACCELERATOR PEDAL ARMS WERE INCORRECTLY ASSEMBLED BY THE SUPPLIER. THE CLEARANCE BETWEEN THE ACCELERATOR PEDAL AND THE BRAKE PEDAL MAY BE REDUCED. THIS CONDITION CAN INCREASE THE RISK OF BOTH PEDALS BEING OPERATED AT THE SAME TIME BY THE DRIVER.
What can happen
THE ACCELERATOR PEDAL COULD BE HELD DOWN BY THE PEDAL STOP ASSEMBLY INCREASING THE RISK OF A CRASH.
The remedy
DEALERS WILL INSPECT THE PEDAL ASSEMBLY AND REPLACE THE ACCELERATOR PEDAL FREE OF CHARGE. THE RECALL BEGAN ON AUGUST 11, 2005. OWNERS MAY CONTACT JAGUAR AT 1-800-452-4827.
Notes
JAGUAR RECALL NO. R847.CUSTOMERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV.
| 2006 JAGUAR XK | Built 2005-02-18 to 2005-03-22. |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| SSM71910 | 2017-03-21. Service bulletin. "ISSUE: 2003-2006 XK (X100) VEHICLES MAY FAIL THE STATE INSPECTION IN SOME STATES WHICH REQUIRE THE COMPLETION OF THE COMPREHENSIVE COMPONENT MONITOR, SUCH AS IN NEW JERSEY. CAUSE: THE ACCELERATOR PEDAL DEMAND POSITION SENSOR VOLTAGE IS OUT OF RANGE, AT 0% PEDAL ANGLE. THE VOLTAGE FOR PEDAL DEMAND POSITION SENSOR 1 SHOULD BE BETWEEN 0.88V AND 0.99V. THE VOLTAGES FOR PEDAL DEMAND POSITION SENSOR 2 SHOULD BE BETWEEN 3.89V AND 4.18V. IF THE VOLTAGE FOR EITHER SENSOR IS NOT WITHIN THE SPECIFIED RANGE AT 0% PEDAL ANGLE, IT WILL INHIBIT THE COMPREHENSIVE COMPONENT MONITOR FROM RUNNING." |
|---|---|
| 03252005 | 2005-05-04. Service bulletin. ACCELERATOR PEDAL ALIGNMENT - QUARANTINE NOTICE. *TT |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.