Service bulletins for the 2020 Western Star 4700
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
163 on file from NHTSA, as of 2026-10-19.
By type
By component
Only bulletins with component: Engine are shown. Show all
| WI21-006 | 2021-02-26. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. Warranty Information Letter for Detroit NOx Sensor Circuit Fault Codes - Claim Guidelines. |
|---|---|
| 20TS-07 | 2020-10-21. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ENGINE AND ENGINE COOLING. Technical Service Letter for Cold Weather Faults on GHG17/21 DD13 with MCM Software Version 14. Due to colder weather, there may be an increase in the frequency of faults, noted below, on GHG17/21 DD13 trucks built after June 5th 2019. This is due to a calibration issue in the current MCM software (14.1.1.5 or 14.2.1.3). New software is scheduled for release in the first quarter of 2021 that will address these faults. |
| 20TS-06 | 2020-10-13. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ENGINE AND ENGINE COOLING. DDC Technical Service Letter for GHG17 DD Platform Heavy Duty Oil Pan Drain Plug Inserts. Some GHG17 DD Platform Heavy Duty oil pans may experience an issue with the oil pan drain plug insert spinning during removal or installation while completing an oil change. Leaking may also be observed at the drain plug and/or other plugs in the oil pan. |
| 18SP736 | 2020-10-01. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:BELTS AND ASSOCIATED PULLEYS; ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN. Detroit Diesel Special Publication informing about Heavy Duty Friction Style Belt Tensioner Kit. This heavy duty friction style belt tensioner kit contains the belt tensioner and two M10 bolts to correctly pin the friction style belt tensioner. The M10x80mm bolt is used to pin the engine cooling fan drive arm. The M10x50mm bolt is used to pin the engine accessory drive arm. |
| 20TS-03REV2 | 2020-10-01. Service bulletin. ENGINE AND ENGINE COOLING. Revised Technical Service Letter for DD Heavy Duty Platform Belt Tensioner Change. A newly designed, dual-arm friction shoe damping tensioner was implemented for the DD Heavy Duty Platform. The revision includes additional information on retrofit and service kits. |
| TechTalk7679 | 2020-10-01. Service bulletin. ENGINE AND ENGINE COOLING. Tech Talk discussion on repair verification for codes like 'low air flow' when a trailer is not available. |
| 20CSA-15 | 2020-09-02. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING; EQUIPMENT. Customer Service Announcement for Release of DiagnosticLink 8.12 Service Pack 2. On Thursday, September 3, 2020, Service Pack (SP) 2 for DiagnosticLink 8.12 Standard and Professional will be made available to download from the Detroit Diesel server. |
| 20TS-05 | 2020-07-31. Service bulletin. ENGINE AND ENGINE COOLING. Technical Service Letter for EPA10, GHG14, GHG17 Diesel Particulate Filter (DPF) Compatibility. Note: This document supersedes 14 TS-25 and 15 TS-8. Detroit Diesel has determined that some, Diesel Particulate Filters (DPFs) are compatible in pairs and or can be mixed together within EPA10 and GHG14 Systems. For 1-BOX and Two-Box Configuration Aftertreatment Systems (ATS), this is only possible when the filters are used in accordance with Tables 1 and 2 shown below. All other DPFs, NOT mentioned below, are NOT compatible. |
| 20OEM-05 | 2020-07-31. Service bulletin. ENGINE AND ENGINE COOLING. OEM and distributor announcement for DiagnosticLink 8.12 (Build 4527) was made available. All DTNA Service shops & OEM locations are required to maintain the latest version of software on each of their stations. |
| 20CSA-10 | 2020-07-31. Service bulletin. ENGINE AND ENGINE COOLING. Customer Service Announcement informing that Service Pack (SP) 1 for DiagnosticLinkî 8.12 Standard and Professional is available to download from the Detroit Diesel server. |
| TS1033014 | 2020-07-31. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP; ENGINE AND ENGINE COOLING. Training Solutions for Fuel Leak Found at High Pressure Fuel Pump Weep Hole for Heavy Duty DD Engines. Occasionally we see trucks come in with fuel leaking from the high pressure fuel pump weep hole. This is NOT a defect in the pump and further diagnostics need to be performed to find the root cause. |
| 20CSA-09 | 2020-07-28. Service bulletin. ENGINE AND ENGINE COOLING. Customer Service Announcement for DiagnosticLink Software Update Reminder. Due to various software changes and fixes, vehicles will require DiagnosticLink 8.12 to perform functional programming. Failure to use this version may cause errors, incomplete programming, and poor vehicle performance. Because of this, all DiagnosticLink 8.09 installed versions will be disabled as of Thursday, July 23, 2020. |
| 20OEM-04 | 2020-06-26. Service bulletin. ENGINE AND ENGINE COOLING. OEM and distributor announcement for Running Change to ACM Software for MY2020. There is an upcoming running change (RC1) for ACM software that will be installed when OEMs or distributors program with DiagnosticLink. The hardware part number for the ACM module will remain the same (A 000 446 97 54). OEMs are instructed to continue ordering the same ACM hardware part number. |
| 20CSA-08 | 2020-06-26. Service bulletin. ENGINE AND ENGINE COOLING. Customer Service Announcement for Release of DiagnosticLink 8.12. On Wednesday, June 10, 2020, DiagnosticLink 8.12 will be made available for download from the ordering system. Current subscribers of DiagnosticLink 8.xx can upgrade to DiagnosticLink 8.12 at no cost. All DTNA service shops are required to maintain the latest version of software on each of their stations. |
| 20TS-03REV | 2020-06-26. Service bulletin. ENGINE AND ENGINE COOLING. Revised Technical Service Letter for DD Heavy Duty Platform Belt Tensioner Change. A newly designed, dual-arm friction shoe damping tensioner was implemented for the DD Heavy Duty Platform. |
| WI20-009 | 2020-06-13. Service bulletin. ENGINE AND ENGINE COOLING. Warranty Information Letter for a Warranty Service Replacement Engine Program Clarification. Detroit established the Warranty Service Replacement Engine Program to support an unrepairable catastrophic engine failure due to manufacturing defect. To improve understanding and utilization of the program, DTNA is clarifying eligibility and engine returns. |
| WI20-004 | 2020-04-23. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING. Warranty Information Letter for Warranty Long Block Program Change. The Detroit Reman Long Block Program has expanded. The expansion reduces complexity in ordering reman engines and promotes stocking reman engines to meet uptime commitments. |
| 20CSA-04 | 2020-03-22. Service bulletin. ENGINE AND ENGINE COOLING; EQUIPMENT. Customer Service Announcement saying that Service Pack (SP) 3 for DiagnosticLink® 8.11 Standard and Professional will be available for download from the Detroit Diesel server. |
| 20TS-02 | 2020-03-06. Service bulletin. ENGINE AND ENGINE COOLING. Technical Service Letter for DD Platform Heavy Duty, Metal in the Oil and Oil Filter. Some engine component failures can cause metallic debris to circulate throughout the engine lubrication system. Although the oil filter will capture most of this debris, some debris may enter the clean side of the lubrication system during oil filter bypass. Detroit has created a lubrication system cleaning and flushing procedure to address this problem. |
| 20CSA-02 | 2020-02-01. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. Customer Service Announcement reminding service locations to update their DiagnosticLink software. To maintain access to the Detroit server, all DiagnosticLink computers must be updated with the current version of DiagnosticLink software. all DiagnosticLink 8.08 installed versions will be disabled as of Tuesday, January 28, 2020. |
| 20CSA-01 | 2020-02-01. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ENGINE AND ENGINE COOLING. Customer Service Announcement for a policy change regarding Detroit Service Information Bulletins (SIBs) will now have a 60-day expiration, starting on the release day of the bulletin. The intent of a SIB is to notify the service network of a major change to one or more service procedures. Do not save SIBs nor reference them for repairs, as they are uncontrolled and never updated. |
| 17TS-12REV | 2020-01-03. Service bulletin. ELECTRICAL SYSTEM:WIRING; ENGINE AND ENGINE COOLING; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. Technical Service Letter for GHG17 Heavy Duty Engine Platform 1-BOX Aftertreatment System (ATS) Wire Harness experiencing chaffing caused by vibration and dirt collecting in the harness conduit. |
| WI19-022 | 2020-01-02. Service bulletin. ENGINE AND ENGINE COOLING; EQUIPMENT; ELECTRICAL SYSTEM. Warranty Information Letter announcing Detroit NOx Sensor Circuit Improvements for GHG17 After Treatment Systems |
| TS1034570 | 2019-11-22. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. Training Solution provides information related to the new Microgateway (MGW) found on Western Star 4700 Cummins Applications. |
| CALWS15-001 | 2019-11-21. Service bulletin. POWER TRAIN; EQUIPMENT ADAPTIVE/MOBILITY; ENGINE. Customer Advisory Letter for Allison flex plate mounting bolts. The incorrect flex plate mounting bolts were installed for certain vehicles. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.