Service bulletins for the 2013 Volvo C70
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
186 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
Only bulletins with component: Blind spot detection are shown. Show all
| TJ25252.7.0-2016 | 2019-11-18. Service bulletin. VISIBILITY; LANE DEPARTURE: BLIND SPOT DETECTION; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. This is a Technical Journal: "BLIS service required" may be displayed in DIM(Drivers Information Module) intermittently during start, without any corresponding DTC's set. This may occur if the BLIS camera heating element is broken due to a hot spot, or if the lead cable for the heater element has become loose due to a bad soldering. Start the engine and make sure that the ambient temperature is below 28ºC (82ºF) to activate the heater function. Test the heater element function by touching the BLIS camera lens with your finger, or spray ice spray to see if the ice disappear. If there is no heat detected, then remove the mirror from the car and access the heater element for inspection. * If there is a visible hot-spot on the heater element, or a loose lead cable, replace the heating element according to VIDA instructions. |
|---|
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.