WenmarOpen by Wenmar Pro

Service bulletins for the 2010 Volkswagen Passat

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

859 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
TT 2009012017-12-14. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Update to existing tip for fuel quality checking.
V201702 20340722017-12-14. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Updated to include an additional diagnostic trouble code (P04F0)
TT 00-13-022017-12-14. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Tech Tips (Technician Helpline Vehicle Check Sheets): When it becomes necessary to open a VW Technician Helpline VTA case while performing diagnosis for a diesel particulate filter, manual transmission repair, or turbocharger concern, it is recommended to complete the related worksheet/check sheet before calling. This document informs where Worksheets/Check Sheets are available on ServiceNet.
TT 90-11-102017-12-14. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Tech Tips (Instrument Cluster Production Mode): During PDI, or after installation of a replacement cluster, ?Pro? may be displayed in place of the odometer. The high beam indicator may be flashing in the instrument cluster as well. This indicates the cluster is in Production mode. Production mode is not the same as ?Transport? mode. This document infroms of the difference between Production, and Transport mode.
V911306 20227392017-12-14. Service bulletin. ELECTRICAL SYSTEM. Technical Bulletin (Bluetooth System Identification): This document informs how to identify the various Bluetooth systems by: ? Visual Identification ? PR Code ? Part Number
V911307 20243372017-12-14. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Technical Bulletin (Factory Installed Media-In (MDI), Updated Programming for Various iPod Concerns): The update programming procedure in this document addresses the following concerns: ? Music skips at beginning of track. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
TT 0114012017-12-14. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Update to existing article that addressed additional diagnostics for lean running concerns.
TT 21-10-012017-12-05. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER. Tech Tips 92006-2014 Vehicles with 2.0T Gasoline Engine - N75 Solenoid Valve Diagnosis): When diagnosis on the above engine leads to the testing of the N75, please refer this document with graphical aid. The diagram shows which vacuum ports on the N75 valve should hold vacuum and which ones should not. Turbocharger fault codes P0299 and P0234 can be diagnosed using this test.
TT 45-09-032017-12-05. Service bulletin. STEERING. Tech Tips (Electro - Steering issues): If, after replacement of the steering rack, fault code 01309 008 is set in the ABS/ESP module only, follow the test plan in GFF for Driver Steering Recommendation (DSR) or channel 3 activation. If the test plan fails to clear the fault, follow the directions in this document
TT 57-10-112017-12-05. Service bulletin. ELECTRICAL SYSTEM. Tech Tips (Comfort Module (J393) or BCM (J519) Replacement): This document informs If a comfort or body control module is replaced during normal diagnosis, make sure the factory mode has been switched OFF. This can be accomplished by selecting the test plan through GFF or through Vehicle Self Diagnosis in adaptation channel 99. Failure to deactivate factory mode will create a concern where the door locks will not lock and/or unlock with the switch and/or the remotes.
561 065 760 A as2017-12-05. Service bulletin. ELECTRICAL SYSTEM. Assembly Instructions: Installation of original remote start feature accessory, Volkswagen Passat.
TT 24-13-032017-12-05. Service bulletin. ELECTRICAL SYSTEM. Tech Tips (Engine Control Module Fault P130A ?Hide Cylinder?): This document informs that DTC P130A ?Hide Cylinder? indicates that excessive misfiring has occurred. As a result, the ECM has turned off a fuel injector to prevent catalyst damage. To address this fault, diagnose and repair all misfire concerns that are present. Repairing the other faults will resolve the P130A.
TT 91-14-022017-12-05. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Tech Tips (MDI Functions with iPhone 5 Variants (5, 5c, 5s and iPad fourth generation, iPod Nano seventh generation)): The Apple iPhone 5, iPhone 5c, and iPhone 5s, as well as the iPad 4th generation and iPod Nano 7th generation use a proprietary ?Lightning? connector that is different than the 30-pin dock connector found on previous iPhone and iPad/iPod models. A new MDI cable (?MDI Adapter Cable ? Lightning Charger?) is now available through the VW Accessories eCatalog that is made for use with iPhone 5 variants as well as the previously mentioned iPad/iPod models. This cable should provide full functionality on any vehicle equipped with a UMI (Unified Multimedia Interface). On MY 13 and older vehicles equipped with an MDI, the software level of the MDI must be at or above SW 240 (see Technical Bulletin 2024337) in order to be fully functional.
TT 91-14-032017-12-05. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Tech Tips (Vehicles equipped with Premium (RCD 510) Radios ? Coding Information for Replacing ?AC? Suffix Radios with ?AF? Suffix Replacement Unit): When replacing the radio on a 2010 ? 2011 vehicle equipped with a Premium 8 (RCD 510) radio with part number ending in the suffix ?AC? (1K0 035 180 AC), if the replacement part has a suffix ?AF?, make sure that online coding is performed. DO NOT PERFORM ANY SOFTWARE UPDATE OF THE ?AF? RADIO USING AN SD CARD OR ANY OTHER MEANS. No software updates are available for ?AF? suffix radios. Any attempt to update the software using an SD card or other means can result in permanent damage to the radio.
Reference - Refl2017-12-05. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Quick Reference Update Guide: This document informs of the corresponding software/hardware and disc availability to the customer concerns about a vehicle
V001404 20103802017-12-05. Service bulletin. EQUIPMENT. Technical Bulletin (Squeaks, Rattles, Noise, Repair Materials): This doucment contains a list of components and applications developed to repair concerns of squeaks, rattles, noise and trim fit conditions.
V871402 20055662017-12-05. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. Technical Bulletin (HVAC, Unpleasant Odor): Condensation, which is a normal condition in all A/C systems, can cause a musty odor. If the odor is noticeable in the vehicle when the engine is not turned on, the cause may be mold and mildew in the passenger compartment, and not be related to the A/C system. All other possible sources of the odor must be investigated before this document can be performed. This document contains the procedure for the VW method to remove musty odors
V011407 20146032017-12-05. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Technical Bulletin This Technical Bulletin details the general process for carrying out a Software Version Management (SVM) software update for any Technical Bulletin (TSB) / Required Vehicle Update (RVU).
V011408 20148152017-12-05. Service bulletin. ENGINE. Technical Bulletin The use of contaminated gasoline, seasonal fuel changes (summer/winter fuel) or gasoline with a low content of deposit control additives may result in one or more of the following conditions: -Excessive accumulation of deposits on intake valves, intake manifold, fuel injectors and combustion chambers. -Engine runs rough after cold start. -Excessive engine cranking time. -Stumbles while driving. -Rough engine idle. -Loss of engine performance. -Poor fuel economy. This document informs of the procedure for the vehicle if it is diagnoised with poor quality gas
V151402 20321502017-12-05. Service bulletin. ENGINE. Technical Bulletin (Proper Removal of Engine Cover to Avoid Breakage): Pulling on the engine cover in some areas can cause damage. This document informs on the procedure to remove the engine cover.
V871401 20055662017-12-05. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. Technical Bulletin (HVAC, Unpleasant Odor): Unpleasant odor is coming from Heating and Ventilation system. Odor mainly occurs after vehicle has been sitting (unused) at least 5 hours and within 20 to 60 seconds after vehicle is first started. Condensation is a normal characteristic in all A/C systems. If odor is noticeable continue to follow this document. Contaminants are effectively neutralized using the AIRCOMATIC? II Ultrasonic Climate System Cleaner (VAS 6189A) or AIRCOMATIC? III Ultrasonic Climate System Cleaner (VAS 6189B) and AIRCO-CLEAN? Ultrasonic HVAC Treatment (30208). All other cleaning methods are no longer permitted. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
V941402 20115212017-12-05. Service bulletin. EXTERIOR LIGHTING:HEADLIGHTS. Technical Bulletin (Exterior Lights, Moisture Accumulation): Exterior light assemblies (headlights, taillights, fog lights, turn signals) are vented and may collect moisture on their inner surfaces, depending on humidity and other climatic changes. This document discusses necessary to diagnosis, and potential remedy of the issue.
V871618_20437042017-11-14. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Updated to include additional model year and required documentation instruction.
V131701-20467802017-11-12. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY. Idler roller for ribbed bely now available as a parts kit.
TT 90-11-102017-11-08. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Tech Tips (Instrument Cluster Production Mode): This document informs the procedure to remove the production mode setting when it is displayed in the instrument cluster.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.