WenmarOpen by Wenmar Pro

Service bulletins for the 2014 Volkswagen Jetta

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1657 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
PDI - 2014 Jetta2017-10-21. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Volkswagen Perfect Delivery Process ? Sales Consultant Delivery Checklist: This document informs the seller of a vehicle with a checklist to cover the experience of a customer who is interested in purchasing a vehicle
PDI - 2014 Jetta2017-10-21. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Volkswagen Perfect Delivery Process ? Sales Consultant Delivery Checklist: This document informs the seller of a vehicle with a checklist to cover the experience of a customer who is interested in purchasing a vehicle
Quick Reference2017-10-21. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Quick Reference Update Guide: This document informs of the corresponding software/hardware and disc availability to the customer concerns about a vehicle
TT 13-14-012017-10-21. Service bulletin. EQUIPMENT:MECHANICAL. Tech Tips (1.8L/2.0L (engine codes CPRA, CPKA, CPPA, CPLA) ? Rear Main Seal Bolts Missing): There are no bolts installed at the 9 and 3 o?clock positions from the factory. No bolts need to be installed in these locations while performing repairs. This document contains example graphics of the placement on the bolts, and lack of bolts
TT 21-14-012017-10-21. Service bulletin. STRUCTURE:BODY. Tech Tips (2014 Jetta (16) 1.8/2.0T- Turbo Noise Under Load No Codes and No Loss of Power): This document informs to inspect the cowling for warp, gaps or low seal compression between the hood and cowl weather strip. Straighten the cowl panel by hand as needed to provide a better seal
TT 45-09-042017-10-21. Service bulletin. POWER TRAIN; STEERING. Tech Tips (2009-2015 Jetta, Eos, Rabbit, Golf, GTI, Passat, CC, and Tiguan Equipped with Electromechanical Power Steering ? G85 Location Identification Tip): Ths document informs of the location of the G85 steering sensor. The sensors expected settings, and which vehicles do not have this sensor for electromechanical power steering.
TT 57-10-112017-10-21. Service bulletin. ELECTRICAL SYSTEM. Tech Tips (Comfort Module (J393) or BCM (J519) Replacement): This document informs if a comfort or body control module is replaced during normal diagnosis, make sure the factory mode has been switched OFF. This can be accomplished by selecting guided function of either the J393 or J519 or control module OBD of J393 or J519 then selecting adaptation channel 99. Failure to deactivate factory mode will create a concern where the door locks will not lock and/or unlock with the switch and/or the remotes.
TT 64-12-022017-10-21. Service bulletin. ELECTRICAL SYSTEM. Tech Tips (Window Switch Replacement): This document informs that Be advised that when replacing a window switch on the listed models, that the switch is not damaged during the removal process. It is preferred to use a bone tool to remove the switch from the housing as opposed to a screwdriver, to prevent the risk of the repair being debited. The document also contains visual examples which show the part in question, and the damage that could occur.
TT 87-14-012017-10-21. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. Tech Tips (AC Compressor Replacement, Refrigerant Circuit Flushing Requirement): This document informs when replacing the Air Conditioning compressor it is necessary to flush the entire system to remove all the PAG oil. Replacement AC compressors come with a full charge of oil. Any time another compressor is installed with a different vendor (such as Sanden to Denso) it is necessary to replace all the oil in the system to the new vendor type PAG oil. This document also informs When installing the new AC compressor immediately transfer the AC compressor caps to the original compressor. There is also a photo to show the necessary part placement.
Update Bulletin2017-10-21. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. UPDATE Technical Bulletin (Software UPDATE ? 45D7 - TPMS/ESC Software (FED_EMS)): This update has been proactively released to prevent illumination of the TPMS and/or ESC light at vehicle start-up and/or under low speed (e.g. <7mph) driving conditions after vehicle start-up. The condition goes away immediately after start up or at speeds greater than 7 mph. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
V011419 20354642017-10-21. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Technical Bulletin (Cylinder Contribution/Balance Faults): This document informs that the Diagnostic strategy for zero fuel calibration was too sensitive. The production solution for this issue was Software implemented into production. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
On car analysis-2017-10-21. Service bulletin. ELECTRICAL SYSTEM. On-car analysis list of customer complaints: Mil?on with fault code P046C, untouched vehicles
On car analysis-2017-10-21. Service bulletin. ELECTRICAL SYSTEM. On-car analysis list of Customer Complaints: Mil?on with fault code P046C, untouched vehicles
On car analysis-2017-10-21. Service bulletin. ELECTRICAL SYSTEM. On-car analysis list of Customer Complaints: Mil?on with fault code P046C, untouched vehicles
V011414 20354642017-10-21. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Technical Bulletin (Cylinder Contribution / Balance Fault issues): The Diagnostic strategy for zero fuel calibration is too sensitive. The production solution for this issue was new software being implemented into production. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
V011416 20376202017-10-21. Service bulletin. ELECTRICAL SYSTEM. Technical Bulletin (Update Programming ECM to Correct Engine Load Calculations): Current ECM programing does not efficiently control engine valve timing causing stumbling and rough idle. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
V171402 20372012017-10-21. Service bulletin. ENGINE. Technical Bulletin (Engine Oil Level): Technicians may find during PDI that the oil level is below the full mark, but still within the hash marks on the engine oil dip stick. All Volkswagen engines are filled to a specific volume before leaving the factory. This level may vary depending on the testing conditions, but will always be within the allowable specification for engine protection. This document also contains a graphic showing the difference between oil levels in the dip stick.
V281403 20373862017-10-21. Service bulletin. ELECTRICAL SYSTEM. Technical Bulletin (Glow Plug Pressure Sensor Faults): When diagnosing MIL ON with glow plug pressure sensor DTC?s it important to perform diagnosis prior to replacing the glow plug. This document informs on the procedure to service this issue. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
V301402 20313662017-10-21. Service bulletin. POWER TRAIN:CLUTCH ASSEMBLY. Technical Bulletin (Slave Cylinder - Clutch Pedal Operation Diagnosis): Customer may comment: ? Complaints on clutch system. ? After pressing the clutch pedal, it remains on the floor. Due to mis-diagnosis of clutch systems, and to prevent incorrect parts replacement, diagnostic procedure implemented into guided fault finding (GFF). This document is for identifying the issue for diagnosis.
V461405 20102452017-10-21. Service bulletin. SERVICE BRAKES; SUSPENSION. Technical Bulletin (Vibration or Noise When Braking): Vibration or noise when braking may be due to brake disc corrosion protection which has not been completely removed by normal braking or surface rust built up during transportation. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
V461406 20151732017-10-21. Service bulletin. SUSPENSION. Technical Bulletin (Brake Disc Pulsation or Vibration): When applying brakes at highway speeds the following symptoms may occur: ? Brake pedal pulsation ? Vibration felt in vehicle body ? Steering wheel shakes For brake vibration or pulsation concerns, brake disc machining is allowed between 6 and 12 months or 6,000 and 12,000 miles (whichever comes first) from the warranty in service date. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
V001408 20369352017-10-21. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Technical Bulletin (Components may be missing from the by-pack at delivery): Components missing from the by-pack should be claimed in one of two ways. (Warranty or Transportation) Understanding when to claim one versus the other is very important. This document informs of the difference between the two and includes info about the MDI cables included in the by-pack
V001407 20369352017-10-21. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Technical Bulletin (By-Pack At Delivery): Components missing from the by-pack should be claimed in one of two ways. (Warranty or Transportation) Understanding when to claim one versus the other is very important. This document informs of the difference
V001406 20157802017-10-21. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Technical Bulletin (PDI - Vehicle Inspection, Protection Removal and Detailing): This document informs on the service a vehicle shouold received when it has successfully reached a dealership. ? Inspecting vehicle for damage (to be completed within 48 hours of delivery to Dealership) ? Shipping damage ? Detailers responsibilities (to be completed prior to delivery to Customer) ? Full Body Covers (FBC), removal and disposal ? RAPGARD, removal and disposal ? Paint finish, inspecting for swirl marks ? Exterior glass, cleaning ? Interior, cleaning ? New vehicle detailing products
TT 90-11-072017-10-21. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Tech Tips (Instrument Cluster Illumination): The instrument cluster illumination is controlled by a photocell inside the cluster. If an illumination concern is suspected, this document informs of the procedure necessary to service this issue

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.