WenmarOpen by Wenmar Pro

Service bulletins for the 2013 Volkswagen Jetta SportWagen

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1014 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
V371602 20339752018-01-08. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. Updated to include an additional model year applicability.
V401602 20405612018-01-08. Service bulletin. STEERING. Updated to include model year 2017 applicability
V661603 20271192018-01-08. Service bulletin. EQUIPMENT. Update model year applicability.
V851603 20416092018-01-08. Service bulletin. VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM:FAN/MOTOR. Update model year applicability.
V871621 20438932018-01-08. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. Updated to include additional model year applicability.
V871622 20199472018-01-08. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. Update to model year applicability.
V341602 20344062018-01-08. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. additional symptom gathering information and guidence to isolate customer concern before beginning repair.
V691601 20104792018-01-08. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Update model year applicability to include 2017.
V871620 20055662018-01-08. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Update model and model year applicability.
Email TDI Update2018-01-08. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. e-mail TDI ODIS AEM Update.
TT 21-13-012017-12-14. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER. Tech Tips (Equipped with Turbocharged Engine Turbocharger Replacement Tip): If mechanical damage is found to the turbocharger (e.g. damaged compression wheel, loose or broken shaft), it is not enough to just replace the turbocharger. This document informs the procedure of checks for damage.
TT 37-11-052017-12-14. Service bulletin. POWER TRAIN. Tech Tips (Measure Value Block Request): If a request has been made for several MVBs from a DSG transmission, the test plan "Read measured values for obligation to report" can be selected. This function will retrieve all of the MVBs from the transmission which can be attached to a VTA ticket. This selection is available under Guided Functions or GFF when using VAS-PC, an example is shown below.
V011316 20340462017-12-14. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM:SOFTWARE. Technical Bulletin (Update Programming of ECM for Concerns of a Bump Sensation after Coming to a Stop): Current ECM programming may cause a bump after coming to a stop, which may be felt through the chassis of the vehicle. This concern is caused by the engine torque being slightly high when the transmission goes into Neutral Control. Neutral Control is designed to reduce load on the engine during idle, in order to decrease emissions. The production solution to this issue was improved software for smoother stopping.
V011317 20340122017-12-14. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM:SOFTWARE. Technical Bulletin (Manifold Absolute Pressure Range / Performance Stored in ECM Fault Memory): Monitoring strategy for the manifold absolute pressure sensor is too sensitive, causing fault code P0106 to incorrectly set in the engine control module. The production solution to this issue was improved software. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
V201305 20314262017-12-14. Service bulletin. FUEL SYSTEM, GASOLINE. Technical Bulletin (High Pressure Fuel Pump Diagnosis): Completing the GFF high pressure pump function test is essential to diagnose proper pump operation and to avoid unnecessary replacements. This document informs how to perform the diagnostic. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
V271301 20339782017-12-14. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. Technical Bulletin (Generator Replacement): This document informs of Charging System inoperative/malfunctions, noise from engine compartment, accessory drive belt damaged or missing. From this condition one or more of the following symptoms are possible * Discharged Battery * No Start * Battery Indicator illuminated in Instrument Cluster * "Low Voltage" DTCs in various control modules * Engine noise * Accessory Drive Belt damaged or missing If a generator is replaced, there must be a confirmed failed GFF Test Plan available, or in the event of a mechanical failure of the component, complete and detailed documentation of the reason for the replacement, which must be submitted into the warranty claim comments.
V281303 20321162017-12-14. Service bulletin. ENGINE AND ENGINE COOLING. Technical Bulletin (Cylinder Glow Plug issues): During the initial glow phase, after switching the ignition "On", the ECM performs a check of the glow plugs through the glow plug control module, to ensure the correct glow plugs are installed. If the engine is cranked during this check, lowering the system voltage, the ECM may receive an incorrect reading and set incorrect glow plug faults. A production solution is already being implemented for this issue. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
V371301 20339752017-12-14. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN. Technical Bulletin (Automatic Transmission Fluid Requirements): At this time, Volkswagen Group of America, Volkswagen Canada do not support or warranty any use of aftermarket universal automatic transmission fluids or the machines used to flush the transmissions. This applies to all standard automatic and DSG transmissions.
V601301 20195682017-12-14. Service bulletin. VISIBILITY:SUN/MOON ROOF ASSEMBLY. Technical Bulletin (Sunroof / Sunshade, Will Not Open): The sunroof's "Basic Setting" has been unintentionally initiated by the customer. When the sunroof is closed and the rotary switch is pressed down in the closed direction for longer than 10 seconds, the basic setting program of the sunroof motor is initiated, and previous sunroof travel limits are lost. If the basic setting is not fully restored (by continuing to hold the rotary switch in the down position until the sunroof has completed its full open/closed travel), fault codes (panoramic sunroof only) will set and the sunroof can no longer be opened. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
V921302 20248782017-12-14. Service bulletin. VISIBILITY:WINDSHIELD WIPER/WASHER. Technical Bulletin (Wiper Blade Inspection for Proper Warranty Coding): Wiper blade inspection guidelines for wear and tear, outside influence or a factory issue. This document informs what is under coverage for wiper blade issues.
TT 26-13-012017-12-14. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM. Tech Tips (Equipped with 2.0L TDI Engine - Engine Control Module Fault P2413 "Exhaust Gas Recirculation System Performance" Diagnosis Tip): When diagnosing ECM fault P2413 "Exhaust Gas Recirculation System Performance", pressure test turbo hoses for leaks and repair as necessary. Once repairs are completed, learned values in ECM must be deleted. Use VAS-PC Vehicle Self Diagnosis or ODIS Control module OBD to select Access Permission (or access authorization), then select Coding 2. Enter code 10008 when prompted. After code has been accepted, clear ECM fault code memory and then cycle key off and back on twice. Road test vehicle to ensure fault does not return.
TT 44-11-012017-12-14. Service bulletin. TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS. Tech Tips (Brake Electronics (ABS) Fault Code 02757 Diagnosis Tip): This document informs if the battery has a low state of charge or is disconnected, fault code 02757 "adapting tire pressures" may set in address 03 - Brake Electronics. The GFF test plan for this fault may prove inconclusive and the fault may not clear, even after performing TPMS reset using the button in glove box or through the MFI. To resolve fault, use ODIS control module OBD or VAS PC Vehicle self-diagnosis to run basic settings 42 under address 03 - Brake Electronics. After selecting basic settings 42, an activate button may be present, but should not be used. The display will change to "reset" once the procedure is complete. After completing basic settings, back out of Brake Electronics and remove the scan tool. Reset TPMS by pressing the "set" button in the glove box or making appropriate selection through MFI, and then road test vehicle to ensure fault does not return.
TT 90-12-042017-12-14. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Tech Tips (Service Interval Settings after Instrument Cluster Replacement): After instrument cluster replacement, service interval maximum values may need to be manually set. This document informs how to set the values manually.
TT 91-13-062017-12-14. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. Tech Tips (Equipped with RCD-510 Premium 8 Radio - Radio Switches to Bluetooth Audio without Input): If the radio is switching to the Bluetooth audio selection whenever a paired phone makes any sound, such as typing or an incoming email or text message, check the BT-Audio Autoplay setting in the Media Setup menu as shown below. If BT-Audio Autoplay is on (checked), switch selection off and retest for concern. If radio software is 0016 or 0007, radio may require software update as per TB 91-13-05 (2031136) to allow BT-Audio Autoplay to switch off.
V171302 20178132017-12-14. Service bulletin. ENGINE AND ENGINE COOLING. Technical Bulletin (Oil Consumption Measurement): Customer states oil consumption is higher than the Volkswagen oil consumption standard of up to 0.5 quarts per 600 miles, or 0.5 liters per 1000 km. In order to provide effective lubrication and cooling of internal engine components, all internal combustion engines consume a certain amount of engine oil. Oil consumption varies from engine to engine and may change significantly over the life of the engine. Typically, engines with specified break-in periods consume more oil during the break-in period, and the oil consumption will stabilize after the break-in period. This document informs of oil consumption tests to check a vehicles performance.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.