Service bulletins for the 2013 Volkswagen Golf R
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
519 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
| TT201301a | 2023-07-10. Service bulletin. UNKNOWN OR OTHER; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM); FUEL SYSTEM, OTHER. To clear static ECM fault P1250 ?Fuel Level Too Low?, add fuel to vehicle and complete a road test of at least 10 miles. Simply adding fuel without completing a road test may not allow fault to clear. |
|---|---|
| TT201301 | 2023-07-10. Service bulletin. FUEL SYSTEM, OTHER; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM); UNKNOWN OR OTHER. To clear static ECM fault P1250 ?Fuel Level Too Low?, add fuel to vehicle and complete a road test of at least 10 miles. Simply adding fuel without completing a road test may not allow fault to clear. |
| TT191301 | 2023-07-10. Service bulletin. ENGINE AND ENGINE COOLING. After a cold start, the engine coolant temperature gauge will slowly rise to approximately 190° F. When the F265 mapped thermostat opens, the gauge may drop by approximately 60° F before again rising to 190° F. No repairs should be attempted for this normal concern. F265 is pictured below. |
| TT131301a | 2023-07-10. Service bulletin. POWER TRAIN; ENGINE AND ENGINE COOLING. When servicing the timing chain sprocket or removing the vibration damper, be aware that one bolt holds both the vibration damper (harmonic balancer) and the crankshaft timing chain sprocket to the crankshaft. Once the damper is removed, the crankshaft should not be rotated unless special tool spacer T10368 has been installed. The crankshaft timing chain sprocket and spur gear drive on the crankshaft have a coupling that must be seated correctly during assembly. Failure to install special tool spacer T10368 before rotating engine will cause the engine to skip time and bend valves. |
| TT131301 | 2023-07-10. Service bulletin. ENGINE AND ENGINE COOLING; POWER TRAIN. CBFA 2.0T TSI Engine |
| TT001403 | 2023-07-10. Service bulletin. EQUIPMENT; EQUIPMENT:ELECTRICAL:INFOTAINMENT:BLUETOOTH/WIFI; ELECTRICAL SYSTEM. When performing SVM updates, the scan tool should be hardwired to the vehicle and the Bluetooth physically turned off. A hard wired internet connection is also recommended. |
| TT001304A | 2023-07-10. Service bulletin. EQUIPMENT. If a needed service part is on back order, upgrade the daily order to a red order and check the ?Car Down? box to escalate the order. If parts assistance is needed, please call 800-767-6552 to speak with a VWGoA Parts Specialist. |
| TT001304 | 2023-07-10. Service bulletin. EQUIPMENT. If a needed service part is on back order, upgrade the daily order to a red order and check the ?Car Down? box to escalate the order. If parts assistance is needed, please call 800-767-6552 to speak with a VWGoA Parts Specialist. |
| TT321401 | 2023-07-05. Service bulletin. POWER TRAIN. Incorrect torque converter or flywheel/flexplate installation can result in transmission damage. When installing an engine, flywheel or transmission, please follow the installation procedures outlined in ELSA. For the flywheel/flexplate, please be certain the correct shim is installed between it and the crankshaft (reference VWIQ120). When installing a torque converter, press the torque converter hub through the seal as far as the first stop. Turn the torque converter while pushing toward the transmission using light force, until the cut outs in the torque converter hub lock into the pump wheel plate. The torque converter slides in. The torque converter is installed correctly if it is easy to turn by hand and if it fits evenly in the transmission bell housing. Additionally, it should spin freely when the transmission bell housing bolts are torqued to the engine block, prior to installation of the flywheel to converter bolts (reference VWIQ121). |
| TT2407103 | 2023-07-05. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM). When diagnosing fault code P2279-Leaking Air in Intake System, be sure to check the cam timing first. |
| TT211001 | 2023-07-05. Service bulletin. ENGINE. When diagnosis on the above engine leads to the testing of the N75, please refer to the picture below. The diagram shows which vacuum ports on the N75 valve should hold vacuum and which ones should not. |
| VWP1326 | 2023-07-05. Service bulletin. EQUIPMENT. Volkswagen is pleased to announce a new edition of the Volkswagen Warranty Policies and Procedures Manual. This edition of the manual applies exclusively to the United States market. For warranty repairs required for Canadian owner's traveling to the Unit warranty terms prior to servicing the vehicle. |
| TB401301 | 2023-06-26. Service bulletin. STRUCTURE. Recommended procedure for removing damaged CV boot. |
| TB401401 | 2023-06-26. Service bulletin. STRUCTURE. CV boot damage identified. |
| TB501403 | 2023-06-26. Service bulletin. WHEELS; STRUCTURE. Surface corrosion or corrosion perforation can occur on various locations around the front wheel arch. |
| TB461406 | 2023-06-26. Service bulletin. SERVICE BRAKES. Brake Disc Pulsation or Vibration (U.S. Only) |
| TB461405 | 2023-06-26. Service bulletin. SERVICE BRAKES. Vibration or noise when braking may be due to brake disc corrosion protection which has not been completely removed by normal braking or surface rust built up during transportation. |
| TB461403 | 2023-06-26. Service bulletin. SERVICE BRAKES. Brake Disc Pulsation or Vibration (U.S. Only) |
| TB461402 | 2023-06-26. Service bulletin. SERVICE BRAKES. Brake Disc Pulsation or Vibration |
| TB461401 | 2023-06-26. Service bulletin. SERVICE BRAKES. Vibration or noise when braking may be due to brake disc corrosion protection which has not been completely removed by normal braking, or surface rust built up during transportation. |
| TB461303 | 2023-06-26. Service bulletin. SERVICE BRAKES. Brake Disc, Pulsation, All Vehicles except Routan (U.S. Only) |
| TB461302 | 2023-06-26. Service bulletin. SERVICE BRAKES. Brake Disc, Pulsation, All Vehicles except Routan (U.S. Only) |
| TB461301 | 2023-06-26. Service bulletin. SERVICE BRAKES. Vibration or noise when braking may be due to brake disc corrosion protection which has not been completely removed by normal braking, or surface rust built up during transportation. |
| TB441403 | 2023-06-26. Service bulletin. SERVICE BRAKES. Vibration or noise when braking may be due to brake disc corrosion protection which has not been completely removed by normal braking, or surface rust built up during transportation. |
| TB371302 | 2023-06-26. Service bulletin. POWER TRAIN. This bulletin provides a procedure to determine ?repair? versus ?replacement? of an automatic transmission. This procedure is to be used ?After? the transmission has been removed from the vehicle. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.