WenmarOpen by Wenmar Pro

Service bulletins for the 2015 Volkswagen Beetle

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

989 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
TT 19-13-022017-11-08. Service bulletin. ENGINE AND ENGINE COOLING. Tech Tips (Coolant Leak or Repeat Coolant Leak from the Water Pump Area): The document informs to inspect for issues, and why issues may happen. It also notes how to fix the issue, and other issues that could happen while repairing the issue
TT 17-15-022017-11-08. Service bulletin. ENGINE. Tech Tips (TDI, with engine codes CVCA, CRUA-Yellow Engine Oil Light coming ON): The document referfs to a new designed dipstick, and the need to maintain proper oil levels. It is important that the oil level be kept within the normal operating range, as overfilling of the crankcase can result in oil service warnings for the customer
TT 64-12-032017-11-08. Service bulletin. ELECTRICAL SYSTEM; VISIBILITY:POWER WINDOW DEVICES AND CONTROLS; VISIBILITY:GLASS, SIDE/REAR. Tech Tips: Door Panel Window Switch Bezel Removal
TT 64-14-022017-11-08. Service bulletin. VISIBILITY:POWER WINDOW DEVICES AND CONTROLS; VISIBILITY:GLASS, SIDE/REAR; ELECTRICAL SYSTEM. Tech Tips (Heated Rear Window, One or More Lines Inoperative): To detect which line(s) is inoperative, utilize a volt meter to check for 0 V, which will be present after the open in the grid line. The check must be performed with the engine running and heated rear window switched on. Switch OFF the ignition and visually locate the damage.
V001502 20157802017-11-08. Service bulletin. EQUIPMENT; STRUCTURE; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Technical Bulletin (PDI - Vehicle Inspection, Protection Removal and Detailing): This document refers to a pre check inspection on the quality of a vehicle such as - Inspecting vehicle for damage (to be completed within 48 hours of delivery to Dealership) - Shipping damage - Detailers responsibilities (to be completed prior to delivery to Customer) - Full Body Covers (FBC), removal and disposal - RAPGARD, removal and disposal - Vehicles are shipped with RAPGARD. This self-adhering plastic product is applied in certain areas of the vehicle and is designed to provide protection from all types of possible damages. - Paint finish, inspecting for swirl marks - Exterior glass, cleaning - Interior, cleaning - New vehicle detailing products
V011512 20401712017-11-08. Service bulletin. ENGINE. Technical Bulletin: Issues with the camshaft adjuster control valve may stick causing camshaft position faults. The document contains the fault codes, and warranty information for diagnosing, and servicing these issues
V401501 20405612017-11-08. Service bulletin. STEERING. Technical Bulletin (Squeaking Noises From Front Of Vehicle): Squeaking/creaking noise from front of vehicle while fully turning steering wheel. The document also gives information on servicing the issue
V601501 20195682017-11-08. Service bulletin. VISIBILITY:SUN/MOON ROOF ASSEMBLY. Technical Bulletin (Sunroof or Power Sunshade, Does Not Open/Close or Automatic Operation Does Not Function). This document contains Warranty information for coverage, and informs of methods to to service the issue
TT 44-13-032017-11-08. Service bulletin. SUSPENSION; WHEELS. Tech Tips: This Tech Tip provides an overview of vehicle four wheel alignment, and important steps that should be followed when performing four wheel alignments
TT 44-13-042017-11-08. Service bulletin. STEERING. Tech Tips: This Tech Tip was established to explain the influence the adjustable steering column tilt position has on the steering wheel being off center and to provide information on checking for steering wheel off center
TT 74-15-012017-11-08. Service bulletin. SEATS:FRONT ASSEMBLY:SEAT HEATER/COOLER. Tech Tips: Side Heated Seat May Take Longer to Heat Up and Potentially be Lower in Temperature
TT 91-15-012017-11-08. Service bulletin. EQUIPMENT. Tech Tips: Vehicle Health Report Received by Customer Indicating a Concern, but Cannot Verify any Conditions or DTC?s to Facilitate Diagnosis
TT 91-15-022017-11-08. Service bulletin. EQUIPMENT. Tech Tips: Car Net Equipped Vehicles-Vehicle Health Report Received by Customer Indicating a Concern, but Cannot Verify any Conditions or DTC?s to Facilitate Diagnosis
V011509 20400572017-11-08. Service bulletin. FUEL SYSTEM, DIESEL; ENGINE; ELECTRICAL SYSTEM. Technical Bulletin: The software was updated to diagnose the Deviation between the calculated and the actual soot mass of the particulate matter trap. The document also contains the fault codes to service the issue, and the Update-Programming Procedure
V241503 20401792017-11-08. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE. Technical Bulletin: This document refers to direction on DTC P2014 Intake Manifold Position Sensor -G336- Replacement, and its fault codes.
V261503 20387522017-11-08. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM. Technical Bulletin: This document contains fault codes for matience on MIL ON, Exhaust Flap Faults. The new Generation III TDI engines have an exhaust flap that is welded into the exhaust pipe assembly. If faults for the flap electronics are stored, it is not necessary to replace the complete pipe. Replacement electronics components are available.
V261502 20387522017-11-08. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM. This document contains the fault codes to trouble shoot MIL ON, Exhaust Flap Fault issues. The new Generation III TDI engines have an exhaust flap that is welded into the exhaust pipe assembly. If faults for the flap electronics are stored, it is not necessary to replace the complete pipe. Replacement electronics components are available.
V261504 20394362017-11-08. Service bulletin. ELECTRICAL SYSTEM; FUEL SYSTEM, GASOLINE. Technical Bulletin: This document contains the fault codes to trouble shoot the Ad Blue Warning and or MIL ON - Ad Blue Leakage at Reductant Injector. Welding process issues of the reductant line connector to the supply line may cause Ad Blue leakage at the reductant injector.
V911503 20378732017-11-08. Service bulletin. EQUIPMENT. Technical Bulletin: This document refers to the software update for RNS 510 Welcome Screen Image Distorted. This procedure corrects the concerns listed above by updating the RNS 510 to the latest software 5382
VWC-17-022017-11-08. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This document reminds dealers that a cable connection is required when performing the 23Q3 emissions recall software update.
On-Car Analysis2017-11-08. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. On-car analysis list of Customer Complaints: Mil?on with fault code P046C, untouched vehicles
TT 00-14-032017-11-08. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Tech Tips (SVM Update Instructions): This document informs when performing SVM updates, the scan tool should be hardwired to the vehicle and the Bluetooth physically turned off. A hard wired internet connection is also recommended.
TT 45-09-032017-11-08. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Tech Tips (Electro ? Steering - DTC 01309 008 ?No Communication with -J500-? is Stored in the ABS/ESP Module Only): This document informs If, after replacement of the steering rack, fault code 01309 008 is set in the ABS/ESP module only, follow the test plan in GFF for Driver Steering Recommendation (DSR) or channel 3 activation. If the test plan fails to clear the fault, follow the directions in this document using Vehicle Self Diagnosis in Address Word 44 - Steering Assistance:
TT 64-14-032017-11-08. Service bulletin. STRUCTURE:BODY:DOOR. Tech Tips (Rattle Noise when Closing Door-Window Regulator Loose): Complaints of a rattle noise when closing the front door or a rattle from door when driving on bumpy roads, may be caused by the front window regulator mounting nuts becoming loose in the door. This concern may be more noticeable with the window closed. This document informs how to service this issue
TT 64-14-042017-11-08. Service bulletin. STRUCTURE:BODY. Tech Tips (Convertible Front Window Contacts Rear Window Glass, Window misaligned): This document informs of Complaints of the front window glass contacting the rear glass may be caused by the front window glass becoming loose in the regulator clamps. The document displays how to service this issue and correct the front window glass

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.