WenmarOpen by Wenmar Pro

Service bulletins for the 2014 Volkswagen Beetle

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1350 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
V401502 20333472017-11-08. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY. Technical Bulletin (CV Boot Replacement): The Recommended procedure for removing damaged CV boot.
V461504 20102452017-11-08. Service bulletin. SERVICE BRAKES. Technical Bulletin (Vibration or Noise When Braking): Vibration or noise when braking may be due to brake disc corrosion protection which has not been completely removed by normal braking or surface rust built up during transportation. This document contains the method to diagnose, and to service this issue
V461505 20151732017-11-08. Service bulletin. SERVICE BRAKES, HYDRAULIC; STEERING. Technical Bulletin (Brake Disc Pulsation or Vibration issues): When applying brakes at highway speeds the following symptoms may occur: - Brake pedal pulsation - Vibration felt in vehicle body - Steering wheel shakes For brake vibration or pulsation concerns, brake disc machining is allowed. This document contains the fault codes to diagnose and service this issue. It also contains fault codes to inquire if the service is covered under warranty.
TT 87-11-012017-11-08. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER; ELECTRICAL SYSTEM. Tech Tips (A/C Control Module Basic Settings): This document gives the procedure to diagnoise the basic settings of the A/C Control Module.
TT 90-11-102017-11-08. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Tech Tips (Instrument Cluster Production Mode): This document informs the procedure to remove the production mode setting when it is displayed in the instrument cluster.
V011516 20411122017-11-08. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Technical Bulletin (Current ECM software causing erroneous faults): This document contains the procedure to update the programming on the diagnostic hardware
V011521 20348982017-11-08. Service bulletin. ENGINE; ELECTRICAL SYSTEM; FUEL SYSTEM, GASOLINE. Technical Bulletin (Exhaust Gas Recirculation Flow Insufficient Stored in ECM Fault Memory): High soot loads prior to regeneration can cause possible restrictions in the EGR filter. This document contains the procedure to update the programming on the diagnostic hardware. This document contains the fault codes necessary to check the warranty coverage for servicing this issue. The document also contains the procedure for servicing the possible causes of restrictions in the EGR filter.
V201503 20314262017-11-08. Service bulletin. ELECTRICAL SYSTEM; ENGINE; FUEL SYSTEM, GASOLINE. Technical Bulletin: High Pressure Fuel Pump Diagnosis. Completing the GFF high pressure pump function test is essential to diagnose proper pump operation and to avoid unnecessary replacements. This document contains the procedure to update the programming on the diagnostic hardware. This document contains the fault codes necessary to check the warranty coverage for servicing this issue.
V871506 20199472017-11-08. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER; ENGINE AND ENGINE COOLING. Technical Bulletin (Air Conditioning, Cleaning of the Refrigerant Circuit (U.S.Only)): In cases where an air conditioning system component (such as a compressor or other system component) has failed and debris from the compressor or component is circulated throughout the refrigerant circuit, the refrigerant circuit must be cleaned of any and all debris or damage to the replacement components will result. This document contains information on how to diagnose, and service this issue.
V871508 20055662017-11-08. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING. Technical Bulletin (HVAC, Unpleasant Odor): Unpleasant odor is coming from Heating and Ventilation system. Odor mainly occurs after vehicle has been sitting (unused) at least 5 hours and within 20 to 60 seconds after vehicle is first started. This document contains information on how to diagnose, and service this issue.
V921502 20262532017-11-08. Service bulletin. VISIBILITY. Technical Bulletin (Windshield Wipers Streak or Smear): Windshield or rear window is streaked, has a snakeskin appearance, or the surface feels rough. To avoid unnecessary replacement of wiper blades, the condition and cleanliness of the windshield, rear window and wiper blades, should be checked first. This document contains information on how to diagnose, and service this issue.
V231501 20411182017-11-08. Service bulletin. FUEL SYSTEM, DIESEL. Technical Bulletin: This document contans information for Diesel Fuel System Diagnoses and Repair.
V011514 20408222017-11-08. Service bulletin. ELECTRICAL SYSTEM. Technical Bulletin (Update Programming, DTCs P0491 and or P2440 stored in the ECM Fault Memory): Current ECM software are causing erroneous faults. This document contains the codes necessary to update the software to diagnose issues
V011513 20376202017-11-08. Service bulletin. ELECTRICAL SYSTEM. Technical Bulletin (Update Programming ECM to Correct Engine Load Calculations): Current ECM programing does not efficiently control engine valve timing causing stumbling and rough idle. The document discusses the procedures for updating the programming. It discusses the codes necessary to service the vehicle, and inquire if the service is under warranty
V001503 20405902017-11-08. Service bulletin. EQUIPMENT; STRUCTURE. Technical Bulletin (Paint Defect - Water Migration Under the RAPGARD): Water migration under the RAPGARD® can be mistaken as a paint defect when in fact it is only moisture trapped in the clear coat of the paint. This document discusses. - RAPGARD, removal and disposal - Inspecting for water migration in areas where RAPGARD was removed. - Examples of water migration after the RAPGARD is removed
TT 27-15-012017-11-08. Service bulletin. POWER TRAIN; ENGINE. Tech Tips (No Crank, No Start After Cold Soak issues): Concern may be the result of a leaking vacuum check valve not holding residual pressure overnight. This results in a hard brake pedal that may require more pressure than usual to allow the vehicle to crank.
TT 23-15-012017-11-08. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM; FUEL SYSTEM, GASOLINE. Tech Tips (Exhaust Gas Recirculation System Performance issues): After replacing the mass air flow sensor basic setting must be reset. This document informs of the procedure necessary to perform the reset
TT 21-10-022017-11-08. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER; POWER TRAIN. Tech Tips: The document discusses the conditions of when turbo can to be fixed or replaced
TT 19-13-022017-11-08. Service bulletin. ENGINE AND ENGINE COOLING. Tech Tips (Coolant Leak or Repeat Coolant Leak from the Water Pump Area): The document informs to inspect for issues, and why issues may happen. It also notes how to fix the issue, and other issues that could happen while repairing the issue
TT 64-12-032017-11-08. Service bulletin. ELECTRICAL SYSTEM; VISIBILITY:POWER WINDOW DEVICES AND CONTROLS; VISIBILITY:GLASS, SIDE/REAR. Tech Tips: Door Panel Window Switch Bezel Removal
TT 64-14-022017-11-08. Service bulletin. VISIBILITY:POWER WINDOW DEVICES AND CONTROLS; VISIBILITY:GLASS, SIDE/REAR; ELECTRICAL SYSTEM. Tech Tips (Heated Rear Window, One or More Lines Inoperative): To detect which line(s) is inoperative, utilize a volt meter to check for 0 V, which will be present after the open in the grid line. The check must be performed with the engine running and heated rear window switched on. Switch OFF the ignition and visually locate the damage.
V001502 20157802017-11-08. Service bulletin. EQUIPMENT; STRUCTURE; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Technical Bulletin (PDI - Vehicle Inspection, Protection Removal and Detailing): This document refers to a pre check inspection on the quality of a vehicle such as - Inspecting vehicle for damage (to be completed within 48 hours of delivery to Dealership) - Shipping damage - Detailers responsibilities (to be completed prior to delivery to Customer) - Full Body Covers (FBC), removal and disposal - RAPGARD, removal and disposal - Vehicles are shipped with RAPGARD. This self-adhering plastic product is applied in certain areas of the vehicle and is designed to provide protection from all types of possible damages. - Paint finish, inspecting for swirl marks - Exterior glass, cleaning - Interior, cleaning - New vehicle detailing products
V401501 20405612017-11-08. Service bulletin. STEERING. Technical Bulletin (Squeaking Noises From Front Of Vehicle): Squeaking/creaking noise from front of vehicle while fully turning steering wheel. The document also gives information on servicing the issue
V461503 20382302017-11-08. Service bulletin. SERVICE BRAKES, HYDRAULIC. Technical Bulletin (Rear Disc Brakes, Replacing Rear Brake Pads and Rotors for Squeal): Rear brake pad composition may result in a squeal from the rear braking system. This document contains the fault codes to diagnosis and Warrenty coverage codes for this issue
V601501 20195682017-11-08. Service bulletin. VISIBILITY:SUN/MOON ROOF ASSEMBLY. Technical Bulletin (Sunroof or Power Sunshade, Does Not Open/Close or Automatic Operation Does Not Function). This document contains Warranty information for coverage, and informs of methods to to service the issue

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.