WenmarOpen by Wenmar Pro

Service bulletins for the 2012 Volkswagen Beetle

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1101 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
TT 19 18 012018-12-03. Service bulletin. ENGINE AND ENGINE COOLING:COOLING SYSTEM; ENGINE. Alternate diagnostic process for overheating.
VWP-18-072018-12-03. Service bulletin. ENGINE. This document advises dealers regarding the Timing Chain/Timing Chain Tensioner Limited Warranty Extension
Timing Chain Cla2018-12-03. Service bulletin. ENGINE; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV). Timing Chain Class Action Update
SM 12-2017 VWMEX2018-09-17. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR. This special notice is to inform dealers to return all part numbers listed in the document. Only superseded part numbers to be ordered going forward.
SM 59-20172018-09-17. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM. This special notice is to inform dealers to return all part numbers listed in the document. Only superseded part numbers to be ordered going forward.
V151702 20454542018-04-16. Service bulletin. ENGINE AND ENGINE COOLING. Update Tiguan oil pan labor operation number in warranty table.
V171701 20128552018-04-16. Service bulletin. ENGINE AND ENGINE COOLING. 17 17 01 July 5, 2017 2012855 Supersedes Technical Bulletin 17-16-02 (V171602) dated April 29, 2016 due to updated oil standards lists to current specifications. Engine Oils Which Meet Volkswagen Oil Quality Standards
V011625 20286092018-03-13. Service bulletin. ELECTRICAL SYSTEM; ENGINE. Update service number and labor operation number.
VWoa Dealer Anno2018-02-05. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL. This document informs of Volkswagen AG and Audi AG received notice from the US Environmental Protection Agency, US Department of Justice and the California Air Resources Board of an investigation related to emissions compliance matters.
V131702 20443502018-02-05. Service bulletin. ENGINE. Update TB to include model year 2017 and include additional engine applicability.
V241707 20473632018-02-05. Service bulletin. ENGINE AND ENGINE COOLING. Metadata adjustment. TB appeared with tech tips in Elsa.
Customer Letter2018-02-05. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL. This document infroms the customer of the decision to extend the Emissions Control Systems Warranty for the Intake Manifold & Fuel Injectors Certain 2011-2012 Model Year Volkswagen Vehicles with 2.0 TFSI Engine (Engine Codes CBFA & CCTA)
VWP-13-132018-01-08. Service bulletin. ENGINE. Secondary Air Pressure Sensor Limited Warranty Extension. Volkswagen has extended the Emission Control Systems Warrantly for secondary air pressure sensor replacement under specific conditions to 10 years or 120,000 miles whichever occurs first, from the vehicle's original in-service date, for the following 2.5 L engine vehicles.
V001605 20338462018-01-08. Service bulletin. ENGINE. Updated to include additional model year applicability.
V011615 20148152018-01-08. Service bulletin. ENGINE. Update to include additional model year applicability.
TT 21-13-012017-12-14. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER. Tech Tips (Equipped with Turbocharged Engine Turbocharger Replacement Tip): If mechanical damage is found to the turbocharger (e.g. damaged compression wheel, loose or broken shaft), it is not enough to just replace the turbocharger. This document informs the procedure of checks for damage.
V011316 20340462017-12-14. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM:SOFTWARE. Technical Bulletin (Update Programming of ECM for Concerns of a Bump Sensation after Coming to a Stop): Current ECM programming may cause a bump after coming to a stop, which may be felt through the chassis of the vehicle. This concern is caused by the engine torque being slightly high when the transmission goes into Neutral Control. Neutral Control is designed to reduce load on the engine during idle, in order to decrease emissions. The production solution to this issue was improved software for smoother stopping.
V011317 20340122017-12-14. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM:SOFTWARE. Technical Bulletin (Manifold Absolute Pressure Range / Performance Stored in ECM Fault Memory): Monitoring strategy for the manifold absolute pressure sensor is too sensitive, causing fault code P0106 to incorrectly set in the engine control module. The production solution to this issue was improved software. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
V271301 20339782017-12-14. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. Technical Bulletin (Generator Replacement): This document informs of Charging System inoperative/malfunctions, noise from engine compartment, accessory drive belt damaged or missing. From this condition one or more of the following symptoms are possible * Discharged Battery * No Start * Battery Indicator illuminated in Instrument Cluster * "Low Voltage" DTCs in various control modules * Engine noise * Accessory Drive Belt damaged or missing If a generator is replaced, there must be a confirmed failed GFF Test Plan available, or in the event of a mechanical failure of the component, complete and detailed documentation of the reason for the replacement, which must be submitted into the warranty claim comments.
TT 17-12-022017-12-14. Service bulletin. ENGINE AND ENGINE COOLING. Tech Tips (Oil Leak From Oil Drain Plug Area After Oil Change and/or Drain Plug Replacement): This document informs an oil leak from around the oil drain plug noted after oil change, and/or drain plug replacement, may be caused by installation of incorrect drain plug. Correct part number drain plug is based on the oil pan design as shown in this document. Original drain plug is 18mm hex for both style oil pans.
TT 26-13-012017-12-14. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM. Tech Tips (Equipped with 2.0L TDI Engine - Engine Control Module Fault P2413 "Exhaust Gas Recirculation System Performance" Diagnosis Tip): When diagnosing ECM fault P2413 "Exhaust Gas Recirculation System Performance", pressure test turbo hoses for leaks and repair as necessary. Once repairs are completed, learned values in ECM must be deleted. Use VAS-PC Vehicle Self Diagnosis or ODIS Control module OBD to select Access Permission (or access authorization), then select Coding 2. Enter code 10008 when prompted. After code has been accepted, clear ECM fault code memory and then cycle key off and back on twice. Road test vehicle to ensure fault does not return.
V171302 20178132017-12-14. Service bulletin. ENGINE AND ENGINE COOLING. Technical Bulletin (Oil Consumption Measurement): Customer states oil consumption is higher than the Volkswagen oil consumption standard of up to 0.5 quarts per 600 miles, or 0.5 liters per 1000 km. In order to provide effective lubrication and cooling of internal engine components, all internal combustion engines consume a certain amount of engine oil. Oil consumption varies from engine to engine and may change significantly over the life of the engine. Typically, engines with specified break-in periods consume more oil during the break-in period, and the oil consumption will stabilize after the break-in period. This document informs of oil consumption tests to check a vehicles performance.
V201306 20340722017-12-14. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM. Technical Bulletin Activated Charcoal Filter System, Solenoid Valve 1 -N80- (Canister Purge Valve) Diagnosis): Completing the GFF function test and performing a vacuum check on the Canister Purge Valve -N80- are essential to diagnose proper operation and to avoid unnecessary replacements. This document informs how to perform the Diagnosis check
TT 2617042017-12-14. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM. Tips to address specific DTCs that can result from an exhaust leak.
TT 20-09-062017-12-05. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER; FUEL SYSTEM, DIESEL. Tech Tips (TDI Engine - N75 Solenoid Valve Diagnosis): This document informs with graphical aid the testing of the N75 Solenoid Valve in the event of a turbocharger fault code such as P0299 or P0234. This applies to Mechanical Injection Style Diesel Engines, Pumpe Duse Style Diesel Engines and the new Common Rail Style Diesel Engines.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.