WenmarOpen by Wenmar Pro

Service bulletins for the 2019 Toyota Tacoma

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

236 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Backup camera are shown. Show all

Bulletins, newest first
T-SB-0045-232023-08-28. Service bulletin. BACK OVER PREVENTION; SUSPENSION; POWER TRAIN. TSB: Some 2019 ? 2023 model year Tacoma Double Cab vehicles may exhibit a whine noise from the rear of the vehicle. This condition may occur while driving around 50 mph (80 kph) at constant speed, slight acceleration, or slight deceleration. This condition may be caused by rear differential vibration transferring through the chassis and body
TTT0636202022-06-21. Service bulletin. BACK OVER PREVENTION; SERVICE BRAKES, HYDRAULIC. TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
T-SB-0098-20 Rev2021-04-19. Service bulletin. BACK OVER PREVENTION. TSB: Some 2016 ? 2020 model year Tacoma vehicles equipped with a 2GR-FKS engine may exhibit a chirp noise from the main accessory drive belt. Follow the Repair Procedure in this bulletin to address this condition.
T-TT-0636-20 Rev2021-04-19. Service bulletin. BACK OVER PREVENTION; SERVICE BRAKES. TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
T-TT-0636-202021-02-16. Service bulletin. BACK OVER PREVENTION; SERVICE BRAKES. TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
T-SB-0001-202020-02-24. Service bulletin. VISIBILITY; BACK OVER PREVENTION; LANE DEPARTURE; ELECTRICAL SYSTEM. TSB: Some 2019 model year Tacoma vehicles may exhibit a Blind Spot Monitor System warning message with any of the following Diagnostic Trouble Codes (DTCs) present. ? C1AC1 ? Master Module Horizontal Axis Misalignment ? C1AC2 ? Slave Module Horizontal Axis Misalignment. Follow the Repair Procedure in this bulletin to address this condition.
K0B_Tunda Tacoma2019-06-24. Service bulletin. FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; BACK OVER PREVENTION. Job Aid: JOB AID FOR SPECIAL SERVICE CAMPAIGN K0B MILLIMETER WAVE RADAR SENSOR CERTAIN: 2018 ? 2019 TACOMA 2018 ? 2019 TUNDRA. Update 5/29/2019: Modified Vehicle Labels are now available (p. 40)
K0B_Tunda Tacoma2019-06-24. Service bulletin. FORWARD COLLISION AVOIDANCE: SENSING SYSTEM: RADAR; BACK OVER PREVENTION; BACK OVER PREVENTION: SENSING SYSTEM: RADAR; LANE DEPARTURE: SENSING SYSTEM: RADAR. J0b Aid: JOB AID FOR SPECIAL SERVICE CAMPAIGN K0B MILLIMETER WAVE RADAR SENSOR CERTAIN: 2018 ? 2019 TACOMA 2018 ? 2019 TUNDRA

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.