Service bulletins for the 2017 Toyota Tacoma
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
379 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
Only bulletins with component: Body and frame are shown. Show all
| ZKA_Dealer Email | 2019-10-15. Service bulletin. STRUCTURE. Dealer Email: Toyota has received a number of reports regarding vehicle frame corrosion perforation on certain 2011-2017 model year Tacoma vehicles. These reports have indicated that these vehicles, when operated in specific cold climate areas (Cold Climate States1) with high road salt usage, or exposed to other environmental factors, may exhibit more-than-normal corrosion to the vehicle?s frame. |
|---|---|
| ZKA_Region Lette | 2019-10-15. Service bulletin. STRUCTURE. Region Letter: Toyota has received a number of reports regarding vehicle frame corrosion perforation on certain 2011-2017 model year Tacoma vehicles. These reports have indicated that these vehicles, when operated in specific cold climate areas (Cold Climate States1) with high road salt usage, or exposed to other environmental factors, may exhibit more-than-normal corrosion to the vehicle?s frame. |
| ZKA_Region Email | 2019-10-15. Service bulletin. STRUCTURE. Region Email: Toyota has received a number of reports regarding vehicle frame corrosion perforation on certain 2011-2017 model year Tacoma vehicles. These reports have indicated that these vehicles, when operated in specific cold climate areas (Cold Climate States1) with high road salt usage, or exposed to other environmental factors, may exhibit more-than-normal corrosion to the vehicle?s frame. |
| T-SB-0021-19 | 2019-04-15. Service bulletin. STRUCTURE. TSB: Some 2016 ? 2019 model year Tacoma vehicles may exhibit corrosion or paint blistering on the front and/or rear lower door sill(s). Follow the Repair Procedure in this bulletin to address this condition |
| T-SB-0055-18_Rev | 2019-03-18. Service bulletin. STRUCTURE; EQUIPMENT. TSB: REVISION NOTICE February 6, 2019 Rev2: ? The Production Change Information section has been updated. September 12, 2018 Rev1: ? The Warranty Information section has been updated. Any previous printed versions of this bulletin should be discarded. Some 2016 ? 2018 model year Tacoma vehicles equipped with an LED type center high mount stop lamp may exhibit a water leak into the rear of the cab. Upon closer inspection, it may become apparent that the water leak is coming from the space between the center high mount stop lamp and the body of the vehicle. Follow the Repair Procedure in this bulletin to address this condition. |
| T-TT-0510-18 | 2019-01-07. Service bulletin. STRUCTURE. TT: Precautions regarding lift point interference with frame hole plugs: To help prevent water from entering the vehicle's frame, hole plugs are installed in certain locations of the frame during manufacturing. ? One of the hole plug styles allow water to drain from the bottom of the frame yet block water from entering. ? This one-way drain plug is located near a usable frame lift point. If the technician does not take note of the location of one-way drain plug, it may be easily crushed by the shop lift's arm. |
| T-TT-0490-18 | 2018-12-17. Service bulletin. STRUCTURE; SUSPENSION. TT: Some vehicles may exhibit a squeak or rattle noise from the FR RH Body Mount Bushing when driving over uneven roads or bumps. Make sure to confirm that noise is coming from RH FR (No.1) Body Mount Bushing before proceeding. |
| T-SB-0055-18-Rev | 2018-12-03. Service bulletin. STRUCTURE. TSB: REVISION NOTICE September 12, 2018 Rev1: ? The Warranty Information section has been updated. Any previous printed versions of this bulletin should be discarded. Some 2016 ? 2018 model year Tacoma vehicles equipped with an LED type center high mount stop lamp may exhibit a water leak into the rear of the cab. Upon closer inspection, it may become apparent that the water leak is coming from the space between the center high mount stop lamp and the body of the vehicle. Follow the Repair Procedure in this bulletin to address this condition. |
| T-TT-0490-18-Rev | 2018-10-22. Service bulletin. STRUCTURE; SUSPENSION. TT: Some 2016-2018 model year Tacoma vehicles may exhibit a squeak or rattle noise from the FR RH (No.1) Body Mount Bushing when driving over uneven roads or bumps. Make sure to confirm that the noise is coming from the FR RH (No.1) Body Mount Bushing before proceeding. |
| T-SB-0055-18 | 2018-08-20. Service bulletin. STRUCTURE. TSB: Some 2016 ? 2018 model year Tacoma vehicles equipped with an LED type center high mount stop lamp may exhibit a water leak into the rear of the cab. Upon closer inspection, it may become apparent that the water leak is coming from the space between the center high mount stop lamp and the body of the vehicle. Follow the Repair Procedure in this bulletin to address this condition. |
| T-SB-0045-16 | 2018-06-11. Service bulletin. EQUIPMENT; STRUCTURE:FRAME AND MEMBERS. TSB: Long-term or off-site storage requires special care to keep vehicles factory fresh and ready for delivery. The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle?s systems and components. Any problems that are found should be corrected immediately. |
| T-SB-0044-16_Rev | 2018-04-02. Service bulletin. STRUCTURE:BODY. TSB: REVISION NOTICE March 07, 2017 Rev1: ? Applicability has been updated to include 2017 model year Toyota vehicles. On some vehicles, when Rapgard? is removed the paint may have a stained appearance. These stains appear to be under the clear coat (repainting this area is NOT necessary). The stain patterns are usually under wrinkles in the Rapgard?. These wrinkles sometimes trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof, and trunk. Stains can be removed by heating the stained surface to remove the trapped moisture. |
| T-SB-0170-16_Rev | 2018-04-02. Service bulletin. STRUCTURE. TSB: REVISION NOTICE January 22, 2018 Rev1: ? Applicability has been updated to include 2016 - 2017 model year Tacoma vehicles. ? The Warranty Information, Parts Information, and Repair Procedure sections have been updated. Any previous printed versions of this bulletin should be discarded. Some 2012 - 2017 model year Tacoma vehicles may exhibit a reed/buzz type wind noise from the LH and/or RH front door when driving in high cross-wind areas. Follow the Repair Procedure in this bulletin to address this condition. |
| T-TT-0477-18 | 2018-04-02. Service bulletin. STRUCTURE:BODY:BUMPERS. TT: Some customers may complain that the gap between the bed and rear bumper or bed and cab is too large or uneven from left to right. This Tech-Tip is to request measurement data when reporting gap complaints. |
| T-SB-0304-17 | 2017-11-14. Service bulletin. STRUCTURE:BODY:DOOR. TSB: Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin. |
| T-SB-0105-16 | 2017-08-14. Service bulletin. EQUIPMENT:ELECTRICAL; STRUCTURE. TSB: Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: *Careful inspection for paint chips/scratches and body dents/dings. *Proper operation of electrical accessories (including interior light, clock, and radio reset). *Interior cleanliness. *Proper function of mechanical systems. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.