WenmarOpen by Wenmar Pro

Service bulletins for the 2014 Toyota Sienna

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

357 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
T-TT-0414-16-Rev2018-12-03. Service bulletin. EQUIPMENT:ELECTRICAL; EQUIPMENT. TT: Some customers may encounter Bluetooth® connectivity concerns such as: ? Difficulty to pair the phone. ? Intermittent Bluetooth® failure to connect to the vehicle when first turning on the vehicle. ? Various Bluetooth® Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or if they have restored their phone data/settings recently.
T-SB-0134-162018-11-26. Service bulletin. ENGINE. TSB: Supersession Notice. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.
Safety Recall an2018-10-15. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; EQUIPMENT. Update on Technician Certification Requirements.
PG006-01-Obsolet2018-10-15. Service bulletin. EQUIPMENT:OTHER:LABELS; EQUIPMENT. Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.
PG004-97-Obsolet2018-10-15. Service bulletin. EQUIPMENT; EQUIPMENT:OTHER:LABELS. Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.
TS-WI-02902018-09-17. Service bulletin. SEATS. Service Bulletin sent to all dealers to inspect L-track bolts for correct torque and to incorporate torque check as part of regular maintenance
T-SB-0304-17_Rev2018-08-20. Service bulletin. EQUIPMENT. TSB: REVISION NOTICE July 31, 2018 Rev2: ? The Supersession Notice has been updated. January 11, 2018 Rev1: ? The Supersession Notice has been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08. Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08 are obsolete and any printed versions should be discarded. Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin. Replacement Certification Label and VIN Plate Criteria A replacement certification label and/or VIN plate may be requested if: ? The vehicle was in an accident and the label and/or plate is damaged or attached to a part that will be replaced during the repair. ? The label and/or plate was stolen.
T-SB-0057-182018-08-20. Service bulletin. EQUIPMENT. TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0043-14. ? Applicability has been updated to include 2017 ? 2018 model year Toyota vehicles. Service Bulletin No. T-SB-0043-14 is obsolete and any printed versions should be discarded. The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system. NOTE New security provisions are required to obtain a reset passcode. It is critical to review the instructions for this new process BEFORE attempting to get a passcode in the new system.
ZH5_Toyota POL172018-07-16. Service bulletin. LATCHES/LOCKS/LINKAGES; ELECTRICAL SYSTEM. Warranty Policy Bulletin: Toyota has received a number of reports regarding the power sliding door rear lock assemblies on certain 2011?2015 model year Sienna vehicles. In these reports, corrosion on the position sensor of the left and/or right power sliding door rear lock assembly caused that door to exhibit one or more of the abnormal operations described below: ? During power mode closing operation, as the power sliding door reaches the nearly closed position, the door reverses and moves toward the open position. ? During power mode closing operation, the power sliding door cannot completely close and latch. ? The power mode closing operation of the power sliding door is inoperative.
ZH4_Toyota POL172018-07-16. Service bulletin. LATCHES/LOCKS/LINKAGES:DOORS:LATCH. Warranty Policy Bulletin: Toyota has received a number of reports regarding sliding door front lock assemblies on certain 2011?2016 model year Sienna vehicles. In these reports, during the closing operation of the left and/or right side sliding door, the door would not completely close and latch due to corrosion on the latch lever pin of the door?s front lock assembly.
T-SB-0045-14_Obs2018-07-16. Service bulletin. SERVICE BRAKES. TSB: OBSOLETE NOTICE May 10, 2018: This bulletin is now obsolete. Please see T-SB-0033-18.
T-TT-0442-172018-07-02. Service bulletin. EQUIPMENT; EQUIPMENT:ELECTRICAL; ELECTRICAL SYSTEM. TT: Safety Connect is a vehicle option which requires a subscription fee for the system to be active. The first year of service is provided in the vehicle purchase price. Once the subscription has expired the DCM (Telematics Transceiver) will be in an inactive state. In some instances, a DCM may need to be replaced even though the customer is not using the service.
T-SB-0208-172018-07-02. Service bulletin. LATCHES/LOCKS/LINKAGES:DOORS:LATCH. TSB: Some 2011 ? 2016 model year Sienna vehicles may exhibit Sliding Door Front and Rear Latches simultaneously NOT latching due to the PSD 25 Amp fuse becoming open. APPLICABLE WARRANTY: This repair is covered under the Toyota Basic Warranty. This warranty is in effect for unlimited mileage and unlimited months of service. Warranty application is limited to occurrence of the specified condition described in this bulletin.
T-SB-0207-172018-07-02. Service bulletin. EQUIPMENT; SEATS. TSB: Some North American produced RAV4, Highlander, Highlander HV, and Sienna vehicles equipped with manual front seats may exhibit an inoperative forward/rearward adjustment function. Upon closer inspection it may be noticed that the Seat Track Adjusting Handle has become disengaged from the locking levers. APPLICABLE WARRANTY: This repair is covered under the Toyota Basic Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first, from the vehicle's in-service date. Warranty application is limited to occurrence of the specified condition described in this bulletin.
T-SB-0044-162018-07-02. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE. TSB: On some vehicles, when Rapgard? is removed, the paint may have a stained appearance. These stains appear to be under the clear coat (repainting this area is not necessary). The stain patterns are usually under wrinkles in the Rapgard?. These wrinkles sometimes trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof, and trunk. Stains can be removed by heating the stained surface to remove the trapped moisture.
T-TT-0497-182018-06-18. Service bulletin. SEATS. TT: Some vehicles may experience a condition in which the 2nd row seat, with center seat, exhibits a chirp/squeak noise from the rear seat latches (floor area). This condition is present while driving over rough or bumpy roads. Upon further inspection, after removal of the LH 2nd row seat, the rear inboard and outboard strikers may show signs of the coating peeling off as shown in Fig.2 and Fig.3.
T-TT-0442-17_Rev2018-06-18. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. TT: Safety Connect is a vehicle option which requires a subscription fee for the system to be active. The trail period of service is provided upon the vehicle purchase. Once the subscription has expired the DCM (Telematics Transceiver) will be in an inactive state. In some instances, a DCM may need to be replaced even though the customer is not using the service. If registration of the replacement DCM part is attempted using the Techstream utility after the account has become inactive, the registration will fail, and messages such as "ATX webserver is Down" or "ATX error" will be displayed.
T-SB-0033-182018-06-18. Service bulletin. SERVICE BRAKES. TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0045-14. * Applicability has been updated to include 2018 model year Sienna vehicles. * The entire bulletin has been updated. Service Bulletin No. T-SB-0045-14 is obsolete and any printed versions should be discarded. Some 2011 - 2018 model year Sienna vehicles may exhibit a vibration/pulsation from the front brakes that can be felt in the brake pedal while lightly applying the brake pedal. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0044-162018-06-11. Service bulletin. STRUCTURE:BODY. TSB: On some vehicles, when Rapgard? is removed, the paint may have a stained appearance. These stains appear to be under the clear coat (repainting this area is not necessary). The stain patterns are usually under wrinkles in the Rapgard?. These wrinkles sometimes trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof, and trunk. Stains can be removed by heating the stained surface to remove the trapped moisture.
T-TT-0392-16 Rev2018-06-11. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. TT: Some customers may experience Bluetooth connection issues after updating the Android Operating System to 5.x.x (Lollipop) or later.
T-SB-0026-162018-06-11. Service bulletin. VEHICLE SPEED CONTROL:CRUISE CONTROL; ELECTRICAL SYSTEM. TSB: Some 2014 - 2016 Sienna vehicles may exhibit an intermittent cruise control stalk illumination flicker condition. Please follow the Repair Procedure in this bulletin to address this condition.
T-TT-0234-13 Rev2018-04-23. Service bulletin. EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM). TT: Since MY 2011, several different update or upgrade USB SSTs have been issued for Toyota audio and navigation systems. Refer to the chart below for a comprehensive list of all current and previously issued USB SSTs and their applicability.
T-TT-0294-14 Rev2018-04-23. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER; FUEL SYSTEM, GASOLINE. TT: Greenhouse Gas Logic (GHC) has been implemented on Toyota A/C Systems to reduce tailpipe emissions. The federal government issues café (Corporate Average Fuel Economy) credits to vehicle manufacturers that implement new technologies that reduce the carbon footprint of the vehicles they produce. GHC Logic technology works by automatically operating the HVAC system in REC mode when certain operating conditions are met, improving the A/C systems cooling efficiency and reducing the vehicle's C02 emissions.
T-TT-0234-13 Rev2018-04-23. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. TT: Since MY 2011, several different update or upgrade USB SSTs have been issued for Toyota audio and navigation systems. Refer to the chart below for a comprehensive list of all current and previously issued USB SSTs and their applicability.
T-TT-0293-14 Rev2018-04-23. Service bulletin. ELECTRICAL SYSTEM. TT: Safety Connect is a vehicle option which requires a subscription fee for the system to be active. The first year of service is provided in the vehicle purchase price. Once the subscription has lapsed the DCM will be in an inactive state. In some instances, a DCM may need to be replaced even though the customer is not using the service.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.