Service bulletins for the 2011 Toyota Sienna
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
372 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
| T-SB-0045-14_Rev | 2018-04-02. Service bulletin. SERVICE BRAKES. TSB: REVISION NOTICE September 19, 2017 Rev2: ? Applicability has been updated to include 2017 model year Sienna vehicles. August 2, 2016 Rev1: ? Applicability has been updated to include 2015 ? 2016 model year Sienna vehicles. Any previous printed versions of this bulletin should be discarded. Some 2011 ? 2017 model year Sienna vehicles may exhibit a vibration/pulsation from the front brakes that can be felt in the brake pedal while lightly applying the brake pedal. Follow the Repair Procedure in this bulletin to address this condition. |
|---|---|
| T-TT-0453-17 | 2018-04-02. Service bulletin. EQUIPMENT:ELECTRICAL. TT: An error message is received when performing DCM activation initiated by Techstream. This is a known condition and will be remedied in the near future. Please discontinue DCM activations utilizing Techstream until further notice. |
| ZH5_Dealer Daily | 2018-04-02. Service bulletin. LATCHES/LOCKS/LINKAGES:DOORS:LATCH. Dealer Daily Message: Extension of Warranty Coverage for the Power Sliding Door Rear Lock Assemblies. The Dealer Letter for Warranty Enhancement Program ZH5 is now available on TIS. |
| ZH5_Toyota POL17 | 2018-04-02. Service bulletin. LATCHES/LOCKS/LINKAGES:DOORS:LATCH; STRUCTURE:BODY:DOOR. Warranty Policy Bulletin: Toyota has received a number of reports regarding the power sliding door rear lock assemblies on certain 2011 ? 2015 model year Sienna vehicles. In these reports, corrosion on the position sensor of the left and/or right power sliding door rear lock assembly caused that door to exhibit one or more of the abnormal operations described below: ? During power mode closing operation, as the power sliding door reaches the nearly closed position, the door reverses and moves toward the open positon. ? During power mode closing operation, the power sliding door cannot completely close and latch. ? The power mode closing operation of the power sliding door is inoperative. |
| ZH5_Dealer Lette | 2018-04-02. Service bulletin. LATCHES/LOCKS/LINKAGES:DOORS:LATCH; STRUCTURE:BODY:DOOR. Dealer Letter: Toyota has received a number of reports regarding the power sliding door rear lock assemblies on certain 2011 ? 2015 model year Sienna vehicles. In these reports, corrosion on the position sensor of the left and/or right power sliding door rear lock assembly caused that door to exhibit one or more of the abnormal operations described below: ? During power mode closing operation, as the power sliding door reaches the nearly closed position, the door reverses and moves toward the open positon. ? During power mode closing operation, the power sliding door cannot completely close and latch. ? The power mode closing operation of the power sliding door is inoperative. |
| ZH5_Dealer Email | 2018-04-02. Service bulletin. STRUCTURE:BODY:DOOR; LATCHES/LOCKS/LINKAGES:DOORS:LATCH. Dealer Email: Toyota has received a number of reports regarding the power sliding door rear lock assemblies on certain 2011 ? 2015 model year Sienna vehicles. In these reports, corrosion on the position sensor of the left and/or right power sliding door rear lock assembly caused that door to exhibit one or more of the abnormal operations described below: ? During power mode closing operation, as the power sliding door reaches the nearly closed position, the door reverses and moves toward the open positon. ? During power mode closing operation, the power sliding door cannot completely close and latch. ? The power mode closing operation of the power sliding door is inoperative. |
| ZH5_Region Lette | 2018-04-02. Service bulletin. LATCHES/LOCKS/LINKAGES:DOORS:LATCH; STRUCTURE:BODY:DOOR. Region Letter: Toyota has received a number of reports regarding the power sliding door rear lock assemblies on certain 2011 ? 2015 model year Sienna vehicles. In these reports, corrosion on the position sensor of the left and/or right power sliding door rear lock assembly caused that door to exhibit one or more of the abnormal operations described below: ? During power mode closing operation, as the power sliding door reaches the nearly closed position, the door reverses and moves toward the open positon. ? During power mode closing operation, the power sliding door cannot completely close and latch. ? The power mode closing operation of the power sliding door is inoperative. |
| ZH5_Region Email | 2018-04-02. Service bulletin. STRUCTURE:BODY:DOOR; LATCHES/LOCKS/LINKAGES:DOORS:LATCH. Region Email: Toyota has received a number of reports regarding the power sliding door rear lock assemblies on certain 2011 ? 2015 model year Sienna vehicles. In these reports, corrosion on the position sensor of the left and/or right power sliding door rear lock assembly caused that door to exhibit one or more of the abnormal operations described below: ? During power mode closing operation, as the power sliding door reaches the nearly closed position, the door reverses and moves toward the open positon. ? During power mode closing operation, the power sliding door cannot completely close and latch. ? The power mode closing operation of the power sliding door is inoperative. |
| ZH4_Dealer Daily | 2018-04-02. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; LATCHES/LOCKS/LINKAGES:DOORS:LATCH. Dealer Daily Message: Extension of Warranty Coverage for the Sliding Door Front Lock Assemblies. The Dealer Letter for Warranty Enhancement Program ZH4 is now available on TIS. |
| ZH4_Toyota POL17 | 2018-04-02. Service bulletin. LATCHES/LOCKS/LINKAGES:DOORS:LATCH; STRUCTURE:BODY:DOOR. Warranty Policy Bulletin: Toyota has received a number of reports regarding sliding door front lock assemblies on certain 2011 ? 2016 model year Sienna vehicles. In these reports, during the closing operation of the left and/or right side sliding door, the door would not completely close and latch due to corrosion on the latch lever pin of the door?s front lock. |
| ZH4_Dealer Lette | 2018-04-02. Service bulletin. STRUCTURE:BODY:DOOR; LATCHES/LOCKS/LINKAGES:DOORS:LATCH. Dealer Letter: Toyota has received a number of reports regarding sliding door front lock assemblies on certain 2011 ? 2016 model year Sienna vehicles. In these reports, during the closing operation of the left and/or right side sliding door, the door would not completely close and latch due to corrosion on the latch lever pin of the door?s front lock assembly. |
| ZH4_Dealer Email | 2018-04-02. Service bulletin. LATCHES/LOCKS/LINKAGES:DOORS:LATCH; STRUCTURE:BODY:DOOR. Dealer Email: Toyota has received a number of reports regarding sliding door front lock assemblies on certain 2011 ? 2016 model year Sienna vehicles. In these reports, during the closing operation of the left and/or right side sliding door, the door would not completely close and latch due to corrosion on the latch lever pin of the door?s front lock assembly. |
| ZH4_Region Lette | 2018-04-02. Service bulletin. STRUCTURE:BODY:DOOR. Region Letter: Toyota has received a number of reports regarding sliding door front lock assemblies on certain 2011 ? 2016 model year Sienna vehicles. In these reports, during the closing operation of the left and/or right side sliding door, the door would not completely close and latch due to corrosion on the latch lever pin of the door?s front lock assembly. |
| ZH4_Region Email | 2018-04-02. Service bulletin. STRUCTURE:BODY:DOOR. Region Email: Toyota has received a number of reports regarding sliding door front lock assemblies on certain 2011 ? 2016 model year Sienna vehicles. In these reports, during the closing operation of the left and/or right side sliding door, the door would not completely close and latch due to corrosion on the latch lever pin of the door?s front lock assembly. |
| T-SB-0244-17 | 2018-04-02. Service bulletin. STRUCTURE:BODY:DOOR; LATCHES/LOCKS/LINKAGES:DOORS:LATCH. TSB: Some 2011 ? 2016 model year Sienna vehicles may exhibit power or manual sliding door front and rear latches simultaneously NOT latching due to corrosion on the latch lever pin of the front lock assembly. Additionally, some 2011 ? 2015 model year Sienna vehicles may exhibit power sliding door abnormal closing operation due to internal corrosion in the latch switch of the rear lock assembly. |
| ZG5_Toyota POL17 | 2018-04-02. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. Warranty Policy Bulletin POL17-01: Toyota has received a number of reports regarding the Overhead Console Switch Assembly operation in Certain 2012 Model Year Camry, Camry Hybrid, and Certain 2011 ? 2013 Model Year Sienna vehicles. In these reports, customers have indicated the switches become inoperative or require excessive pressure to operate. |
| ZG5_Dealer Lette | 2018-04-02. Service bulletin. EQUIPMENT. Dealer Letter: Toyota has received a number of reports regarding the Overhead Console Switch Assembly operation in Certain 2012 Model Year Camry, Camry Hybrid, and Certain 2011 - 2013 Model Year Sienna vehicles. In these reports, customers have indicated the switches become inoperative or require excessive pressure to operate. |
| ZG5_Dealer Email | 2018-04-02. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. Dealer Email: Toyota has received a number of reports regarding the Overhead Console Switch Assembly operation in Certain 2012 Model Year Camry, Camry Hybrid, and Certain 2011 ? 2013 Model Year Sienna vehicles. In these reports, customers have indicated the switches become inoperative or require excessive pressure to operate. |
| ZG5_Region Lette | 2018-04-02. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. Region Letter: Toyota has received a number of reports regarding the Overhead Console Switch Assembly operation in Certain 2012 Model Year Camry, Camry Hybrid, and Certain 2011 ? 2013 Model Year Sienna vehicles. In these reports, customers have indicated the switches become inoperative or require excessive pressure to operate. |
| ZG5_Region Email | 2018-04-02. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. Region Email: Toyota has received a number of reports regarding the Overhead Console Switch Assembly operation in Certain 2012 Model Year Camry, Camry Hybrid, and Certain 2011 ? 2013 Model Year Sienna vehicles. In these reports, customers have indicated the switches become inoperative or require excessive pressure to operate. |
| T-SB-0152-14 | 2018-04-02. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; SEATS. TSB: Some 2011 ? 2013 model year Sienna vehicles may exhibit a condition where the outside seat shield is loose and separating, or has an excessive gap to the seat cushion or forward facing seat shield. The condition may occur on either the driver or passenger front power equipped seats. Follow the Repair Procedure in this bulletin to address this condition. |
| T-TT-0092-11 Rev | 2018-04-02. Service bulletin. SEATS; ELECTRICAL SYSTEM. Some customers may complain that the Rear Seat Entertainment (RSE) system is inoperative if they have misplaced the parental passcode for the system. |
| T-TT-0234-13 | 2018-04-02. Service bulletin. EQUIPMENT. Since MY 2011, several different update or upgrade USB SSTs have been issued for Toyota audio and navigation systems. Refer to the chart below for a comprehensive list of all current and previously issued USB SSTs and their applicability. |
| T-PG006-00 Obsol | 2018-04-02. Service bulletin. EQUIPMENT:OTHER:LABELS. This bulletin is now obsolete. Please see T-SB-0054-13. |
| T-SB-0054-13 | 2018-04-02. Service bulletin. EQUIPMENT. California (CA), Federal (FED), and 50 State Certified emission control underhood labels (emission labels) may be obtained through your dealership?s Parts Department utilizing standard replacement parts ordering procedures. Follow the guidelines outlined in this bulletin to ensure proper label application. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.