WenmarOpen by Wenmar Pro

Service bulletins for the 2020 Toyota RAV4

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

347 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
T-SB-0138-18-Rev2019-10-15. Service bulletin. EQUIPMENT. TSB: REVISION NOTICE September 24, 2019 Rev1: ? Applicability has been updated to include 2020 model year RAV4 and RAV4 HV vehicles. Any previous printed versions of this bulletin should be discarded. Some 2019 ? 2020 model year RAV4 and RAV4 HV vehicles shipped from Japan may have front emergency towing eyelets installed to aid in transportation. Remove the emergency towing eyelets during Pre-Delivery Service (PDS) using the following procedure.
T-TT-0573-192019-10-15. Service bulletin. ELECTRICAL SYSTEM. TT: Some customers may experience a call failure when attempting to call a conference call number that has been saved in their phonebook (ex: ?8005550122,,,1.,2;;;2#?). This issue is caused by changes to the Bluetooth in the iOS 13 update and may be resolved in a future iOS update.
T-TT-0553-192019-09-03. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. TT: The new DCA-8000 Diagnostic Charger may cause your facility?s Ground Fault Circuit Interrupter (GFCI) breaker to trip. A GFCI breaker can be tripped for various reasons, one of the reasons may be related to the DCA-8000. We are investigating this issue to determine the root cause. Other reasons the GFCI breaker may trip ? Circuit demand is too high for GFCI rating ? Worn out GFCI internal contacts ? Improper installation or wiring of GFCI breaker
T-SB-0158-18-Rev2019-09-03. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY. TSB: REVISION NOTICE July 03, 2019 Rev1: ? Applicability has been updated to include 2020 model year Supra vehicles. ? The Hook and Loop Style section has been added. Any previous printed versions of this bulletin should be discarded. 2020 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicle?s glove box for customer reference. CAUTION ? ALWAYS verify the floor mat is designed specifically for the model and model year it is being installed in. ? ONLY use floor mats that can be secured using the retainers. ALL OEM Toyota floor mats are specifically designed to fit correctly and be secured using the retainers. ? Make sure the floor mat is properly placed on the vehicle carpet and secured with the retainers. If the driver side floor mat is NOT properly placed and secured, it could slip and interfere with the movement of the pedals during driving and may cause an accident. ? Verify the operation of the accelerator, brake, and clutch (if equipped) pedals and clearance to the mat. ? NEVER install more than one floor mat at a time in the driver?s seating position. ? If applicable, ANY secondary set of floor mats (based upon customer preference, such as the all-weather floor mats or other floor mats) MUST be placed in the trunk with ALL the packaging material intact. Do NOT install the secondary mat on top of the primary floor mat already installed in the driver?s seating position.
T-SB-0134-16-Rev2019-09-03. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM; ENGINE. TSB: REVISION NOTICE July 01, 2019 Rev2: ? Applicability has been updated to 2019 ? 2020 model year Toyota vehicles. ? The Techstream Preparation and Process Overview sections have been updated. October 30, 2017 Rev1: ? Applicability has been updated to include 2018 model year vehicles. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0012-13. Service Bulletin No. T-SB-0012-13 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information. NOTE ECU is a Toyota term used to describe integrated computerized devices responsible for managing the operation of a system or subsystem. For the purposes of this bulletin, the term ?ECU? is used as a generic label for the following SAE J1930 standard references: ? Powertrain Control Module (PCM) ? Engine Control Module (ECM) ? Transmission Control Module (TCM) ? Any other Toyota specific control unit
T-TT-0551-192019-07-15. Service bulletin. EQUIPMENT. TT: Some customers may experience an Entune? update pop-up message after every key cycle.
T-TT-0549-192019-07-15. Service bulletin. ELECTRICAL SYSTEM. TT: The new 12V Battery Warranty Testers (DSS-5000 & DCA-8000) require certain information to generate a test result and warranty code. Below is an explanation of what information is required when testing a 12V battery on the new Warranty Battery Testers.
T-TT-0552-192019-07-15. Service bulletin. EQUIPMENT; ENGINE. TT: When repairing a 1234YF HVAC system on a gas powered (Non-Hybrid) Toyota and the addition of compressor oil is required to complete the repairs, the various 1234YF compressor oils (ND-12, PS-D1, or VC100YF) are available through the Toyota Approved Dealer Equipment website.
T-SB-0073-192019-07-15. Service bulletin. STRUCTURE; EQUIPMENT. TSB: TMNA Accessory Sales and Marketing has developed a Toyota paint protection film (PPF) decal (treated with a specially developed light adhesive) for 2019 ? 2020 model year Toyota vehicles. The decal comes in two sizes (2.8 in. x 8 in. and 4 in. x 8 in.) for small and large hoods and will be applied to the top of PPF for all series at TLS accessory installation facilities. The decal is intended to stay affixed to the film until delivery detail/wash. Just before customer delivery, follow the procedure in this Service Bulletin to remove the decal and any residue left by the adhesive.
T-SB-0064-18_Rev2019-07-15. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. TSB: REVISION NOTICE June 17, 2019 Rev1: ? Applicability has been updated to include 2019 ? 2020 model year Corolla Hatchback, RAV4, and RAV4 Hybrid and 2020 model year Corolla and Corolla Hybrid vehicles. ? The Required Tools & Equipment section has been updated. Any previous printed versions of this bulletin should be discarded. The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased and can never be reused. Another feature, Add/Remove Key, is also available. Once a key is removed, it can never be reused. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system and to add and/or remove a key. NOTICE When performing a Smart Code Reset, ALL registered keys are erased and CANNOT be used again on ANY vehicle. For Undesignated Key Permanent Erasure utility, ONLY the keys that are NOT present will be removed. ANY keys that are NOT present can never be reused.
T-TT-0529-19_Rev2019-06-24. Service bulletin. POWER TRAIN. TT: Customers may experience abnormal noise/vibration from the hybrid transaxle. Note: This is different from Vehicle Proximity Notification system. Please use link #2 of this document and test the Proximity Notification System to determine if origin of noise is abnormal.
T-TT-0537-192019-05-13. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; VISIBILITY; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; LANE DEPARTURE. TT: The blind spot monitor (BSM) sensor angle inspection is used to confirm that the BSM sensor is within the specified angle before performing axis beam adjustment. When used in conjunction with the repair manual, these BSM tips leverage SSTs and readily available tools to support sensor angle confirmation in varying shop environments.
T-TT-0529-192019-04-15. Service bulletin. POWER TRAIN. TT: Customers may experience noise from the hybrid transaxle.
T-TT-0468-17-Rev2019-03-25. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. TT: HVAC drain tube is found to be blocked/clogged.
T-SB-0006-19_Rev2019-03-18. Service bulletin. EQUIPMENT; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. TSB: REVISION NOTICE February 11, 2019 Rev1: ? The Introduction and Every Two Months sections have been updated. Any previous printed versions of this bulletin should be discarded. Hybrid vehicles are equipped with two types of batteries: ? Hybrid Vehicle (HV) battery ? Auxiliary (12V) battery If the hybrid vehicle is put into storage, the State-Of-Charge (SOC) of its HV battery and auxiliary battery will gradually decrease. To prevent the auxiliary battery from becoming discharged during storage, proper maintenance is necessary. Perform the following maintenance service for the HV battery and auxiliary battery. NOTE ? BEFORE disconnecting the auxiliary battery, confirm the shift lever is in the ?P? position and apply the parking brake completely. The shift lever CANNOT be shifted from the ?P? position with the auxiliary battery disconnected. ? If the negative (?) terminal of the auxiliary battery is reconnected, even if the vehicle is powered ON (Ready ON), the hybrid system may NOT start. In this case, depress the brake pedal and press the Power button to start the hybrid system (the Ready light is ON). If the hybrid system still does NOT start (the Ready light is OFF), refer to the Repair Manual.
TSB-0009-192019-02-19. Service bulletin. EQUIPMENT. TSB: Long-term or off-site storage requires special care to keep vehicles factory fresh and ready for delivery. The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle?s systems and components. Any problems that are found should be corrected immediately.
T-SB-0008-192019-02-19. Service bulletin. EQUIPMENT. TSB: An initialization procedure is required to activate the Entune? 3.0 App Suite Connect for Entune? 3.0 Audio, Entune? 3.0 Audio Plus, and Entune? 3.0 Premium Audio head units before they are used for the first time on new vehicles. The initialization procedure may also be performed under other circumstances, such as following a head unit replacement or after the customer?s personal settings are erased. The initialization procedure requires between 3 and 15 minutes to complete, depending on file size, cellular connection speed, and other factors. Connection to a wireless network is recommended for optimal functionality when downloading software via a smartphone. Download the latest Entune? 3.0 app onto the smartphone. Following the initialization procedure, individual Entune? 3.0 apps may periodically update through an over-the-air update system. Updates are optional or mandatory. The update procedure will take approximately 1 minute for each app requiring an update. Follow the procedure in this bulletin to perform the initialization and app updates. Additionally, a Safety Connect static cling is available to increase customer awareness. This bulletin also includes the vehicle identification process for Safety Connect-equipped vehicles and the static cling installation procedure.
T-SB-0007-192019-02-19. Service bulletin. ELECTRICAL SYSTEM. TSB: A battery in a stored vehicle is subject to conditions that can reduce its performance and life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life. As a matter of policy, Toyota does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer?s responsibility to maintain the specified State-Of-Charge (SOC) of the vehicle?s battery while in stock and ensure proper SOC at delivery. To eliminate customer service concerns due to an undercharged battery during the first few weeks of ownership, ALL dealers should check battery SOC and recharge, if necessary, within 48 hours of delivery to customers.
T-SB-0006-192019-02-19. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY. TSB: Hybrid vehicles are equipped with two types of batteries: ? Hybrid Vehicle (HV) battery ? Auxiliary (12V) battery If the hybrid vehicle is put into storage, the State-Of-Charge (SOC) of its HV battery and auxiliary battery will gradually decrease. To prevent the auxiliary battery from becoming discharged during storage, proper maintenance is necessary. Perform the following maintenance service for the HV battery and auxiliary battery. NOTE ? BEFORE disconnecting the auxiliary battery, confirm the shift lever is in the ?P? position and apply the parking brake completely. The shift lever CANNOT be shifted from the ?P? position with the auxiliary battery disconnected. ? If the negative (?) terminal of the auxiliary battery is reconnected, even if the Power button is in the Start mode, the hybrid system may NOT start. In this case, push the Power button and select the Start mode again to start the hybrid system (the Ready light is ON). If the hybrid system still does NOT start (the Ready light is OFF), refer to the Repair Manual.
T-SB-0002-192019-02-19. Service bulletin. TIRES. TSB: During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Refer to the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the same location on the vehicle.
T-TT-0521-192019-02-19. Service bulletin. ENGINE AND ENGINE COOLING. TT: The current engine active test ?Control the Injection Mode? is not operating as desired when controlling the direct injectors manually on 2GR-FKS engines. When direct injection is started and then stopped using the active test, current ECU logic does not turn off the direct injectors and can cause DTCs P017200, P017500 and P0160300. To avoid this condition, technicians should raise engine RPM when changing back and forth between the Direct Injection and Port Injection active tests. Use the recommended procedure below to avoid this concern while testing injection mode of FKS equipped vehicles. NOTE: If the active test is used multiple times without using this procedure to raise engine RPM, it may be necessary to reset learning values for fuel trim and Air to Fuel ratio before returning vehicle to customer.
T-SB-0158-182019-02-19. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY. TSB: 2020 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicle?s glove box for customer reference.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.