Service bulletins for the 2020 Toyota RAV4
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
347 on file from NHTSA, as of 2026-10-19.
About U0100 on the 2020 Toyota RAV4: what the code means, and the bulletins and recalls about the same components.
By type
By component
By trouble code
By topic
Only bulletins with trouble code: U0100 are shown. Show all
| T-TT-0694-22 Rev2 | 2024-07-23. Service bulletin. ENGINE. After jump-starting, the vehicle may experience a no-start condition and multiple DTCs including U010087. Upon investigation, it is found that the engine ECU has been damaged and needs to be replaced. In several cases, it was found that the cause of the ECU damage was improper jump starting. Further investigation found that ECU damage may occur if the negative (ground) cable clamps are attached on or around the engine ECU or ECU mounting bracket. |
|---|---|
| T-TT-0694-22 Rev2 | 2024-07-23. Service bulletin. ENGINE. After jump-starting, the vehicle may experience a no-start condition and multiple DTCs including U010087. Upon investigation, it is found that the engine ECU has been damaged and needs to be replaced. In several cases, it was found that the cause of the ECU damage was improper jump starting. Further investigation found that ECU damage may occur if the negative (ground) cable clamps are attached on or around the engine ECU or ECU mounting bracket. |
| T-TT-0694-22 Rev | 2022-09-15. Service bulletin. ENGINE AND ENGINE COOLING. TT: After jump-starting, the vehicle may experience a no-start condition and multiple DTCs including U010087. Upon investigation, it is found that the engine ECU has been damaged and needs to be replaced (Fig 1). In several cases, it was found that the cause of the ECU damage was improper jump starting. Further investigation found that ECU damage may occur if the jumper cables are hooked up on or around the engine ECU or ECU mounting bracket |
| T-TT-0694-22 | 2022-05-16. Service bulletin. ELECTRICAL SYSTEM. TT: After jump-starting, the vehicle may experience a no-start condition and multiple DTCs including U010087. Upon investigation, it is found that the engine ECU has been damaged and needs to be replaced (Fig 1). In several cases, it was found that the cause of the ECU damage was improper jump starting. Further investigation found that ECU damage may occur if the jumper cables are hooked up on or around the engine ECU or ECU mounting bracket |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.