Service bulletins for the 2017 Toyota Highlander
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
282 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
| T-SB-0187-12_Rev | 2018-04-02. Service bulletin. TIRES. TSB: REVISION NOTICE February 12, 2018 Rev2: ? Applicability has been updated to include 2015 ? 2018 model year vehicles. January 23, 2014 Rev1: ? Applicability has been updated to include 2013 ? 2014 model year vehicles. Any previous printed versions of this bulletin should be discarded. Toyota vehicles are equipped with either conventional or run-flat tires. Sometimes punctures may occur as a result of contact with road debris or other hazards. If a puncture occurs, it may be possible to repair the tire and return it to service. With a conventional tire it is not possible to drive for an extended amount of time with the tire at low pressures as damage to the tire may occur. With run-flat tires, due to reinforced sidewalls, it is possible to drive for up to 100 miles at speeds less than 55 mph with little or no damage to the tire. The U.S. Tire Manufacturers Association (UTSMA) provides guidelines and recommendations for tire repair and replacement. It also provides information related to: ? Basic tire information ? Tire maintenance and safety ? Driver education, tire safety curriculum. |
|---|---|
| T-SB-0009-18 | 2018-04-02. Service bulletin. EQUIPMENT. TSB: The purpose of this Service Bulletin is to elevate awareness and provide best practices for leather and synthetic leather care in Toyota vehicles. As an additional resource, if the vehicle is equipped with factory leather seats, the vehicle Owner?s Manual will highlight the importance of proper maintenance and provide guidance for care. |
| T-SB-0001-18_Rev | 2018-04-02. Service bulletin. ELECTRICAL SYSTEM. TSB: REVISION NOTICE February 02, 2018 Rev1: ? Applicability has been updated to include 2018 model year Sienna vehicles. ? The entire bulletin has been updated. Any previous printed versions of this bulletin should be discarded. When completing a transaxle assembly replacement, Engine Control Module (ECM) (SAE term: Powertrain Control Module [PCM]) replacement, or ECM (PCM) reprogram, ensure the correct ECM (PCM) software is matched with the transaxle assembly hardware. Some 2017 ? 2018 model year Highlander and Sienna vehicles require different ECM (PCM) software based on the transaxle assembly hardware installed in the vehicle. NOTICE Mismatched transaxle assembly hardware and ECM (PCM) software combinations may result in a harsh shift or shift flare. If this occurs after the original repair, additional ECM (PCM) replacement and reprogramming will be required. This additional ECM (PCM) replacement and/or reprogramming is NOT covered under warranty. Use the information in this Service Bulletin to confirm that the correct ECM (PCM) hardware and software are used based on the transaxle assembly part number and serial number. |
| T-SB-0194-17 | 2018-04-02. Service bulletin. POWER TRAIN. TSB: Some 2017 model year Highlander vehicles may exhibit the following conditions: ? Lack of power. ? High RPM shift point at the 2-3 shift ? Hesitation in low gears. Some model year Highlander vehicles with the Stop and Start features may exhibit the following conditions: ? Extended crank condition. ? RPM fluctuation during or immediately following engine restart. The Engine Control Module (ECM) logic has been modified. Follow the Repair Procedure below to address these conditions. |
| T-SB-0304-17_Rev | 2018-04-02. Service bulletin. EQUIPMENT. TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, and T-SB-0144-08. Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, and T-SB-0144-08 are obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. REVISION NOTICE January 11, 2018 ? The Supersession Notice has been updated. Any previous printed versions of this bulletin should be discarded. Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin. |
| T-TT-0475-18 | 2018-04-02. Service bulletin. FUEL SYSTEM, GASOLINE. TT: In the event that injector seal repair is required on vehicles equipped with a direct injection fuel system, a Special Service Tool Set is required to properly install the seal onto the injector. As new vehicle configurations have been released, several injector seal tool sets have been distributed to accommodate these new vehicles. There are a total of three injector seal tool sets for Toyota models, located in the appropriate SST cabinets. Each kit contains multiple pieces as shown in the diagram below. The individual pieces must remain together to ensure these tools are used correctly. Refer to the repair manual for the tool information to ensure the correct tool is used for the desired application. |
| T-TT-0474-18 | 2018-04-02. Service bulletin. POWER TRAIN. TT: For some repairs on 2017-2018 Sienna and Highlander and 2018 Camry vehicles equipped with the 8-speed transmission, it is necessary to determine transmission serial number and understand production date. |
| T-SB-0001-18 | 2018-04-02. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). TSB: When completing a transaxle assembly replacement, Engine Control Module (ECM) (SAE term: Powertrain Control Module [PCM]) replacement, or ECM (PCM) reprogram, ensure the correct ECM (PCM) software is matched with the transaxle assembly hardware. Some 2017 - 2018 model year Highlander and 2017 model year Sienna vehicles require different ECM (PCM) software based on the transaxle assembly hardware installed in the vehicle. NOTICE Mismatched transaxle assembly hardware and ECM (PCM) software combinations may result in a harsh shift or shift flare. If this occurs, ECM (PCM) replacement and reprogramming will be required. If ECM (PCM) replacement/reprogramming is needed, it will not be covered under warranty. Use the information in this Service Bulletin to confirm that the correct ECM (PCM) hardware and software are used based on the transaxle assembly part number and serial number. |
| T-SB-0211-17_Rev | 2018-03-12. Service bulletin. SUSPENSION. TSB: REVISION NOTICE February 23, 2018 Rev1: ? Applicability has been updated to include 2018 model year Highlander and Highlander HV vehicles. ? The Introduction, Warranty Information, and Repair Procedure sections have been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0016-16. ? The entire bulletin has been updated. Service Bulletin No. T-SB-0016-16 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Some 2014 ? 2018 model year Highlander and Highlander HV vehicles may exhibit an abnormal squeak noise from the rear suspension. This condition may be more noticeable in colder, ambient temperatures and may occur when traveling over uneven roads or when the vehicle comes to a complete stop. The abnormal noise may be caused by the rear trailing arm bushing. An updated rear trailing arm assembly is available. Follow the Repair Procedure below to address this condition. |
| T-SB-0016-18 | 2018-03-12. Service bulletin. FUEL SYSTEM, GASOLINE; ENGINE. TSB: Some 2016 ? 2017 model year Tacoma, 2017 model year Sienna and Highlander, and 2018 model year Camry vehicles equipped with a 2GR-FKS engine may exhibit a chirping noise from the high-pressure fuel pump. Follow the Repair Procedure in this bulletin to address this condition. |
| T-TT-0484-18 | 2018-03-12. Service bulletin. EQUIPMENT:ELECTRICAL. TT: Some customers may experience echoing on the line calling the vehicle when using Bluetooth Hands Free. This is caused by the phone Hands Free volume being too low. These settings may need to be reapplied any time the phone is paired to a new head unit, a phone update is applied, or the phone is un-paired and re-paired. |
| T-SB-0187-12_Rev | 2018-03-12. Service bulletin. TIRES. TSB: REVISION NOTICE February 12, 2018 Rev2: ? Applicability has been updated to include 2015 ? 2018 model year vehicles. January 23, 2014 Rev1: ? Applicability has been updated to include 2013 ? 2014 model year vehicles. Any previous printed versions of this bulletin should be discarded. Toyota vehicles are equipped with either conventional or run-flat tires. Sometimes punctures may occur as a result of contact with road debris or other hazards. If a puncture occurs, it may be possible to repair the tire and return it to service. With a conventional tire it is not possible to drive for an extended amount of time with the tire at low pressures as damage to the tire may occur. With run-flat tires, due to reinforced sidewalls, it is possible to drive for up to 100 miles at speeds less than 55 mph with little or no damage to the tire. The U.S. Tire Manufacturers Association (UTSMA) provides guidelines and recommendations for tire repair and replacement. It also provides information related to: ? Basic tire information ? Tire maintenance and safety ? Driver education, tire safety curriculum. |
| T-SB-0009-18 | 2018-03-12. Service bulletin. EQUIPMENT; SEATS. TSB: The purpose of this Service Bulletin is to elevate awareness and provide best practices for leather and synthetic leather care in Toyota vehicles. As an additional resource, if the vehicle is equipped with factory leather seats, the vehicle Owner?s Manual will highlight the importance of proper maintenance and provide guidance for care. |
| T-SB-0001-18_Rev | 2018-03-12. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). TSB: REVISION NOTICE February 02, 2018 Rev1: ? Applicability has been updated to include 2018 model year Sienna vehicles. ? The entire bulletin has been updated. Any previous printed versions of this bulletin should be discarded. When completing a transaxle assembly replacement, Engine Control Module (ECM) (SAE term: Powertrain Control Module [PCM]) replacement, or ECM (PCM) reprogram, ensure the correct ECM (PCM) software is matched with the transaxle assembly hardware. Some 2017 ? 2018 model year Highlander and Sienna vehicles require different ECM (PCM) software based on the transaxle assembly hardware installed in the vehicle. NOTICE Mismatched transaxle assembly hardware and ECM (PCM) software combinations may result in a harsh shift or shift flare. If this occurs after the original repair, additional ECM (PCM) replacement and reprogramming will be required. This additional ECM (PCM) replacement and/or reprogramming is NOT covered under warranty. Use the information in this Service Bulletin to confirm that the correct ECM (PCM) hardware and software are used based on the transaxle assembly part number and serial number. |
| T-TT-0478-18 | 2018-02-21. Service bulletin. STRUCTURE:BODY:DOOR. TT: Some vehicles may experience a condition in which the LH or RH front door outside molding exhibits a gap, looseness or separation from the outer door panel. |
| T-SB-0162-13_Rev | 2018-02-21. Service bulletin. HYBRID PROPULSION SYSTEM; ELECTRICAL SYSTEM. TSB: REVISION NOTICE January 05, 2018 Rev1: ? Applicability has been updated to include 2012 ? 2017 Camry HV and Prius C, 2015 ? 2017 Prius V, 2006 ? 2017 Highlander HV, 2010 ? 2016 Prius, and 2016 ? 2017 RAV4 HV model year vehicles. ? The Repair Procedure section has been updated. Any previous printed versions of this bulletin should be discarded. Some 2006 ? 2017 Highlander HV, 2010 ? 2016 Prius, 2012 ? 2017 Camry HV, Prius C and Prius V, and 2016 ? 2017 RAV4 HV model year vehicles used under certain severe operating conditions may exhibit an excessive buildup of dust, lint, or other debris in the HV battery cooling fan, which can reduce the efficiency of the HV battery cooling system. Follow the Repair Procedure in this bulletin to address this condition. |
| T-SB-0134-16_Rev | 2017-11-14. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. TSB: REVISION NOTICE October 30, 2017 Rev1: * Applicability has been updated to include 2018 model year vehicles. SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0012-13. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU's information. |
| T-SB-0304-17 | 2017-11-14. Service bulletin. STRUCTURE:BODY:DOOR. TSB: Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin. |
| T-SB-0103-16_Obs | 2017-10-15. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. TSB: OBSOLETE NOTICE September 12, 2017: This bulletin is now obsolete. Please see T-SB-0279-17. |
| T-SB-0279-17 | 2017-10-15. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0103-16. The entire bulletin has been updated. Service Bulletin No. T-SB-0103-16 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. |
| SET-TSB-17-005 | 2017-10-05. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. Southeast Toyota Accessory rear overhead DVD mutes sound during Engine's Stop/Start Functions. |
| SET-TSB-17-007 | 2017-08-25. Service bulletin. EXTERIOR LIGHTING. Southeast Toyota Accessory LED Fog & DRL 2 in 1 light inoperative. Provide Accessory lamp diagnostics and manufacturing date inspection information. |
| T-SB-0232-17 | 2017-08-15. Service bulletin. STRUCTURE:BODY:DOOR:HINGE AND ATTACHMENTS; STRUCTURE:BODY:DOOR. TSB: Some 2014 - 2017 model year Highlander/Highlander HV and 2011 - 2017 model year Sienna vehicles equipped with a Power Back Door (PBD) may exhibit a condition in which the back door latch does not release and the PBD cannot be opened from any switch (IP, key, back door), with one or both of the following conditions: * Excessive force required to operate the manual back door latch release lever * DTC B2250 present. |
| T-TT-0414-16 | 2017-08-14. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; EQUIPMENT:ELECTRICAL. TT: Some customers may encounter Bluetooth® connectivity concerns such as: *Difficulty to pair the phone. *Intermittent Bluetooth® failure to connect to the vehicle when first turning on the vehicle. *Various Bluetooth® Audio functions are no longer functioning with customer's phone such as ability to change the track using the steering wheel controls. |
| T-SB-0042-16 | 2017-06-15. Service bulletin. TIRES. DURING THE MANUFACTURING PROCESS, TIRES ARE MOUNTED ON THE VEHICLE AS MATCHED SETS TO HELP REDUCE CONDITIONS SUCH AS PULLING OR DRIFTING. IF THE WHEELS ARE REPLACED OR REFINISHED BEFORE VEHICLE DELIVERY, IT IS IMPORTANT THAT THE TIRES REMAIN ON THE VEHICLE IN THE SAME LOCATION AND IN THE SAME DIRECTION OF ROTATION. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.