Service bulletins for the 2011 Toyota Highlander
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
335 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
Only bulletins with component: Steering column and wheel are shown. Show all
| T-SB-0034-13 | 2018-07-02. Service bulletin. STEERING: STEERING WHEEL/HANDLE BAR; STEERING:RACK AND PINION:PINION SHAFT. TSB: REVISION NOTICE: April 26, 2017 Rev1: G361 ? The Parts Information section has been updated. Some 2008 ? 2013 model year Highlander and Highlander HV vehicles may exhibit a clunk, pop, or knock-type noise when turning the steering wheel left or right. A new intermediate shaft has been developed to address this condition. Use the following repair procedure to remove and replace the steering intermediate shaft. |
|---|---|
| T-TT-0223-13 | 2018-04-23. Service bulletin. STEERING: STEERING WHEEL/HANDLE BAR. The vehicle will not start or ready-on and the steering wheel lock is engaged so that the steering wheel may only be turned very little from side-to-side. |
| T-SB-0034-13 | 2018-04-23. Service bulletin. STEERING: STEERING WHEEL/HANDLE BAR. Some 2008 ? 2013 model year Highlander and Highlander HV vehicles may exhibit a clunk, pop, or knock-type noise when turning the steering wheel left or right. A new intermediate shaft has been developed to address this condition. Use the following repair procedure to remove and replace the steering intermediate shaft. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.