WenmarOpen by Wenmar Pro

Service bulletins for the 2024 Toyota CROWN

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

116 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
T-SB-0110-20 Rev22026-09-09. Service bulletin. ENGINE. OBSOLETE NOTICE August 20, 2026: This bulletin is now obsolete. Please see T-SB-0051-26.
T-SB-0051-262026-09-09. Service bulletin. ENGINE. This bulletin includes basic procedures for performing a rescue charge at battery on high voltage (HV) Ni-MH and Li-ion batteries.
T-SB-0104-21 Rev22026-03-07. Service bulletin. ENGINE. OBSOLETE NOTICE February 27, 2026: This bulletin is no longer applicable and is now obsolete.
T-SB-0021-252025-04-08. Service bulletin. ENGINE. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Global Techstream+ (GTS+) ECU flash reprogramming procedures and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard+ (CUW+). To ensure the correct ECU software is installed, ECUs will require a Security Signature before the ECU will initialize the flash reprogramming sequence. This bulletin also details the process for acquiring a Security Signature from TIS during the GTS+ ECU flash reprogramming process.
T-SB-0107-20 Rev22025-03-25. Service bulletin. ENGINE. OBSOLETE NOTICE February 11, 2025: This bulletin is now obsolete. Please see T-SB-0021-25.
T-SB-0021-252025-03-11. Service bulletin. ENGINE. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Global Techstream+ (GTS+) ECU flash reprogramming procedures and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard+ (CUW+). To ensure the correct ECU software is installed, ECUs will require a Security Signature before the ECU will initialize the flash reprogramming sequence. This bulletin also details the process for acquiring a Security Signature from TIS during the GTS+ ECU flash reprogramming process.
T-SB-0110-20 Rev22025-01-09. Service bulletin. ENGINE. This bulletin includes basic procedures for performing a rescue charge at battery on high voltage (HV) Ni-MH and Li-ion batteries. This bulletin should be used in conjunction with the applicable model and model year Repair Manual while performing the battery rescue charge. The GRX-5100 should be used wherever the Repair Manual references the Toyota Hybrid System (THS) charger.
T-TT-0765-242024-11-08. Service bulletin. ENGINE. Some 2023-2024, Camry, Camry HV, Crown, RAV4, and RAV4 HV, may exhibit an oil leak from the cylinder head cover, near the union of the timing chain cover and cam housing.
T-SB-0103-20 Rev12024-07-23. Service bulletin. ENGINE. This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 – 2025 model year Toyota vehicles.
T-TT-0694-22 Rev22024-07-23. Service bulletin. ENGINE. After jump-starting, the vehicle may experience a no-start condition and multiple DTCs including U010087. Upon investigation, it is found that the engine ECU has been damaged and needs to be replaced. In several cases, it was found that the cause of the ECU damage was improper jump starting. Further investigation found that ECU damage may occur if the negative (ground) cable clamps are attached on or around the engine ECU or ECU mounting bracket.
T-SB-0103-20 Rev12024-07-23. Service bulletin. ENGINE. This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 – 2025 model year Toyota vehicles.
T-TT-0694-22 Rev22024-07-23. Service bulletin. ENGINE. After jump-starting, the vehicle may experience a no-start condition and multiple DTCs including U010087. Upon investigation, it is found that the engine ECU has been damaged and needs to be replaced. In several cases, it was found that the cause of the ECU damage was improper jump starting. Further investigation found that ECU damage may occur if the negative (ground) cable clamps are attached on or around the engine ECU or ECU mounting bracket.
T-SB-0120-20 Rev22024-07-06. Service bulletin. ENGINE; ELECTRICAL SYSTEM. Some 2021 – 2024 model year Toyota vehicles may require the download and installation of vehicle specific software or configuration software when the Electronic Control Unit (ECU) is replaced. GTS+ software has been modified to indicate when configuration software is required. A new Configure column has been added to the GTS+ Health Check Results screen to show when configuration software is available for a specific ECU. REVISION NOTICE April 18, 2024 Rev2: •Applicability has been updated to include 2024 model year Tundra, Tundra Hybrid, Venza Hybrid, bZ4X, Corolla, Corolla Cross, Corolla Cross Hybrid, Corolla Hybrid, Crown, GR Corolla, Corolla Hatchback, Prius, Prius Prime, Sequoia Hybrid, Highlander, Grand Highlander, Grand Highlander Hybrid, Land Cruiser, Tacoma, Tacoma Hybrid, and Mirai vehicles and 2023 model year Corolla Hatchback and Prius Prime vehicles. •The Introduction section has been updated. •The Operation Procedure section has been removed. •The Standard ECU Configuration Procedure and ECU Configuration Value Writing Procedure sections have been added.
T-SB-0120-20 Rev22024-07-06. Service bulletin. ENGINE; ELECTRICAL SYSTEM. Some 2021 – 2024 model year Toyota vehicles may require the download and installation of vehicle specific software or configuration software when the Electronic Control Unit (ECU) is replaced. GTS+ software has been modified to indicate when configuration software is required. A new Configure column has been added to the GTS+ Health Check Results screen to show when configuration software is available for a specific ECU. REVISION NOTICE April 18, 2024 Rev2: •Applicability has been updated to include 2024 model year Tundra, Tundra Hybrid, Venza Hybrid, bZ4X, Corolla, Corolla Cross, Corolla Cross Hybrid, Corolla Hybrid, Crown, GR Corolla, Corolla Hatchback, Prius, Prius Prime, Sequoia Hybrid, Highlander, Grand Highlander, Grand Highlander Hybrid, Land Cruiser, Tacoma, Tacoma Hybrid, and Mirai vehicles and 2023 model year Corolla Hatchback and Prius Prime vehicles. •The Introduction section has been updated. •The Operation Procedure section has been removed. •The Standard ECU Configuration Procedure and ECU Configuration Value Writing Procedure sections have been added.
T-PANT-2024-004-2024-04-15. Service bulletin. ENGINE AND ENGINE COOLING; ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION. This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
TSB0104212024-04-01. Service bulletin. SERVICE BRAKES, HYDRAULIC; ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING:COOLING SYSTEM; LANE DEPARTURE. TSB: Some 2018 ? 2024 model year Toyota vehicles equipped with an A25A-FKS, A25A-FXS, M20A-FKS, or M20A-FXS engine may exhibit one or more of the following conditions: ?Milky/discolored engine oil. ?An ?Oil Pressure Low? warning message on the Multi-information Display (MID). ?A MIL ON condition with Diagnostic Trouble Codes (DTCs) P05202A (Engine Oil Pressure Sensor/Switch ?A? Signal Stuck in Range) and/or P052477 (Engine Oil Pressure Too Low [Severe]) present. Moisture from blow-by gases condenses and accumulates in the engine oil during short trips in extreme cold weather. When the moisture in the oil freezes, the oil pressure may drop, and the aforementioned warning indicators may display. Follow the procedures in this bulletin to address these conditions.
T-SB-0107-202023-08-28. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE. TSB: Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Global Techstream+ (GTS+) ECU flash reprogramming procedures and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard+ (CUW+). To ensure the correct ECU software is installed, ECUs will require a Security Signature before the ECU will initialize the flash reprogramming sequence. This bulletin also details the process for acquiring a Security Signature from TIS during the GTS+ ECU flash reprogramming process.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.