Service bulletins for the 2024 Toyota Corolla
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
98 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
| T-SB-0010-24 Rev1 | 2025-01-09. Service bulletin. STRUCTURE:BODY. Some 2021 – 2022 model year Avalon, 2018 – 2024 Camry, 2019 – 2025 model year Corolla, 2022 – 2025 model year Corolla Cross, and 2019 – 2025 model year RAV4 vehicles with A25A-FKS and M20A-FKS engines may have a MIL ON condition with one or more of the following Diagnostic Trouble Codes (DTCs) upon cold soak start up with engine coolant temperatures between 14°F – 41°F: •P030027 – Random/Multiple Cylinder Misfire Detected (Emission) Signal Rate of Change Above Threshold •P030000 – Random/Multiple Cylinder Misfire Detected •P030100 – Cylinder 1 Misfire Detected •P030200 – Cylinder 2 Misfire Detected •P030300 – Cylinder 3 Misfire Detected •P030400 – Cylinder 4 Misfire Detected |
|---|---|
| T-SB-0110-20 Rev2 | 2025-01-09. Service bulletin. ENGINE. This bulletin includes basic procedures for performing a rescue charge at battery on high voltage (HV) Ni-MH and Li-ion batteries. This bulletin should be used in conjunction with the applicable model and model year Repair Manual while performing the battery rescue charge. The GRX-5100 should be used wherever the Repair Manual references the Toyota Hybrid System (THS) charger. |
| T-SB-0039-24 Rev2 | 2025-01-09. Service bulletin. STRUCTURE:BODY. The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting. |
| T-SB-0038-24 Rev2 | 2025-01-09. Service bulletin. STRUCTURE:BODY. To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. |
| T-SB-0035-24 Rev2 | 2025-01-09. Service bulletin. STRUCTURE:BODY. Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout. |
| T-SB-0061-23 Rev2 | 2025-01-09. Service bulletin. STRUCTURE:BODY. Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application. |
| T-SB-0062-23 Rev2 | 2025-01-09. Service bulletin. STRUCTURE:BODY. Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas. |
| T-SB-0109-24 | 2024-12-07. Service bulletin. ENGINE. Some 2023 – 2024 model year Corolla Hybrid vehicles that utilize a mechanical key (without a smart key) may exhibit a MIL ON condition with Diagnostic Trouble Code (DTC) P0A1B1F (Generator Control Module Circuit Intermittent) present. The Hybrid Vehicle Control Computer (HV ECU) logic has been modified to reduce the possibility of this condition. Follow the Repair Procedure in this bulletin to address this condition |
| T-TT-0753-24 Rev1 | 2024-12-07. Service bulletin. ENGINE. Some technicians may report an engine oil leak from the Engine Oil Level Sensor area |
| T-SB-0098-24 | 2024-11-08. Service bulletin. STRUCTURE:BODY. Some 2022 model year Avalon and Avalon Hybrid, 2022 – 2024 model year Camry, Camry Hybrid, Corolla, Corolla Hatchback, Corolla Hybrid, Highlander, Highlander Hybrid, Prius, Prius Prime, RAV4, RAV4 Hybrid, RAV4 Prime, and Venza Hybrid, 2023 – 2024 model year Crown, and 2024 model year Grand Highlander vehicles may exhibit a high-pitched noise coming from the front HVAC blower motor while operating the air conditioner or heater. This condition does not affect the operation of the vehicle, however, a heater cover has been developed to help reduce or potentially eliminate the noise. |
| T-SB-0062-24 Rev1 | 2024-11-08. Service bulletin. ELECTRICAL SYSTEM. Some 2023 model year RAV4 Prime vehicles with Data Communication Module (DCM) firmware version earlier than LG-N210hh1V1V-09 may exhibit a condition in which the remote climate system is inoperative after the vehicle has been off for three hours or more. Some 2023 model year Corolla, Corolla Cross, Corolla Cross Hybrid, Corolla Hatchback, Corolla Hybrid, Crown, GR Corolla, Highlander, Highlander Hybrid, Prius, Prius Prime, RAV4, RAV4 Hybrid, RAV4 Prime, and Venza Hybrid vehicles and 2024 model year Grand Highlander and Grand Highlander Hybrid vehicles with DCM firmware versions earlier than LG-N210jj3333-09, LG-N210nn1212-09, LG-N310kk4646-0I, LG-N310ll4A4A-0I, LG-N310mm8A8A-0I, LG-N310nnBLBM-0I, or LG-N310oo1B1B-0I may exhibit a condition in which remote services are inoperative. Some 2023 model year Corolla, Corolla Cross, Corolla Cross Hybrid, Highlander, and Highlander Hybrid vehicles, 2023 – 2024 model year Corolla Hybrid, GR Corolla, Prius, Prius Prime, RAV4, RAV4 Hybrid, RAV4 Prime, and Venza Hybrid vehicles, 2024 model year Grand Highlander, Grand Highlander Hybrid, and Land Cruiser vehicles; 2023 – 2025 Corolla Hatchback and Crown vehicles, and 2025 Crown Signia vehicles with DCM firmware versions earlier than LG-N210qq####-## or LG-N310qq####-## may exhibit a condition in which Apple Music® or Amazon Music streaming and/or remote services are inoperative. A DCM firmware update is now available. |
| T-SB-0041-24 Rev1 | 2024-11-06. Service bulletin. ENGINE. OBSOLETE NOTICE September 24, 2024: This bulletin is now obsolete. Please see T-SB-0081-24 |
| T-SB-0081-24 | 2024-11-06. Service bulletin. ENGINE. Some 2023 – 2024 model year Corolla and Corolla Cross vehicles with M20A-FKS engines may exhibit a MIL ON condition with one or both of the following Diagnostic Trouble Codes (DTCs) present: •P11EA00 – (Bank 1 Air-Fuel Ratio Imbalance (Port)) •P013A7C – (A/F Sensor – Rich to Lean Bank 1 Sensor 2 Slow Response) There are no drivability issues or other symptoms associated with this condition. |
| T-SB-0077-24 | 2024-11-06. Service bulletin. ENGINE. Some 2021 – 2024 model year Corolla, 2022 – 2024 model year Corolla Cross, and 2023 – 2024 model year Corolla Cross Hybrid vehicles with M20A-FKS or M20A-FXS engines may exhibit an oil leak that originates between the oil pan sub-assembly and the stiffening crankcase assembly. |
| T-SB-0055-24 Rev1 | 2024-09-07. Service bulletin. STRUCTURE:BODY. Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process. |
| T-SB-0088-23 Rev2 | 2024-09-07. Service bulletin. ENGINE. Some 2020 – 2024 model year Corolla vehicles may exhibit a vibration or rattle noise from the right-hand engine mounting insulator sub-assembly. This condition will usually go away when the engine Revolutions Per Minute (RPM) are above idle. This condition is typically found on vehicles in warm climates/weather. No Diagnostic Trouble Codes (DTCs) are associated with this condition. This condition does not affect the operation of the vehicle. |
| T-SB-0039-24 Rev1 | 2024-09-07. Service bulletin. STRUCTURE:BODY. The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting. |
| T-SB-0038-24 Rev1 | 2024-09-07. Service bulletin. STRUCTURE:BODY. To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. |
| T-SB-0035-24 Rev1 | 2024-09-07. Service bulletin. STRUCTURE:BODY. Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout. |
| T-SB-0055-24 Rev1 | 2024-08-08. Service bulletin. STRUCTURE:BODY. Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process. |
| T-SB-0088-23 Rev2 | 2024-08-08. Service bulletin. ENGINE. Some 2020 – 2024 model year Corolla vehicles may exhibit a vibration or rattle noise from the right-hand engine mounting insulator sub-assembly. This condition will usually go away when the engine Revolutions Per Minute (RPM) are above idle. This condition is typically found on vehicles in warm climates/weather. No Diagnostic Trouble Codes (DTCs) are associated with this condition. This condition does not affect the operation of the vehicle. |
| T-SB-0039-24 Rev1 | 2024-08-08. Service bulletin. STRUCTURE:BODY. The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting. |
| T-SB-0038-24 Rev1 | 2024-08-08. Service bulletin. STRUCTURE:BODY. To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. |
| T-SB-0035-24 Rev1 | 2024-08-08. Service bulletin. STRUCTURE:BODY. Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout. |
| T-SB-0061-23 Rev1 | 2024-07-23. Service bulletin. STRUCTURE:BODY. Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.