Recalls that may apply to the 2010 Suzuki GSX-R600
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
By component
| 16V018000 | 2016-01-19. ELECTRICAL SYSTEM. Suzuki Motor of America, Inc. (Suzuki) is recalling certain model year 2008-2012 AN400, AN400A, DL1000, GSX1300R, 2008-2009 GSF1250S and GSF1250SA, 2008 GSX1300BK and GSX1300BKA, 2008-2010 GSX650F, GSX-R600, GSX-R750, VLR1800, VLR1800T, and 2009-2010 SFV650 and VZ1500 motorcycles. Due to a problem with the circuit board for the regulator/rectifier power module, the motorcycle may not sufficiently charge the battery and the motorcycle may stall. Built 2008-01-11 to 2010-09-17. |
|---|---|
| 13V449000 | 2013-10-18. SERVICE BRAKES. Suzuki Motor of America, Inc. (Suzuki) is recalling certain model year 2004-2013 GSX-R600 and GSX-R750, and model year 2005-2013 GSX-R1000 motorcycles. In combination with older brake fluid, corrosion of the brake piston inside of the front brake master cylinder generates gas that may result in a reduction of fluid pressure transmission to the front brake. Built 2009-11-01 to 2010-07-31. |
| 2016022 | 2016-01-18. Electrical. On certain motorcycles, the regulator/rectifier assembly may have been produced with insufficient adhesion between the power module (circuit board) and the rectifier case. Due to this insufficient adhesion, heat generated on the power module circuit board can cause the circuit board to deform. This could cause excessive heat on the circuit board and uncontrolled electric current output, which can result in insufficient charging current being provided to the vehicle's battery. Battery discharge could lead to engine stalling and/or a no-start condition. Lost propulsion, in conjunction with traffic and road conditions, and the rider's reactions, could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will replace the regulator/rectifier assembly. Note: This recall may supersede recall 2011-071 for certain model motorcycles, which will require re-inspection and repair. |
|---|---|
| 2013360 | 2013-10-18. Brakes. On certain motorcycles, corrosion could form inside the front brake master cylinder, which could cause a spongy brake feel. This could potentially lead to extended stopping distances, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will install a redesigned front brake master cylinder. |
A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.