WenmarOpen by Wenmar Pro

Service bulletins for the 2013 Subaru XV CrossTrek

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

300 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Brakes are shown. Show all

Bulletins, newest first
06-90-242024-07-01. Service bulletin. SERVICE BRAKES. This bulletin provides diagnosis and procedure information to be applied when diagnosing potential fluid leaks on front and rear brake calipers. This information has been developed to reduce unnecessary brake caliper replacement.
1112412R2023-04-17. Service bulletin. ENGINE; SERVICE BRAKES, AIR:DRUM:S-CAM. Difficulty Starting, Rough Idle, Cam Position
064412R2023-03-20. Service bulletin. SERVICE BRAKES; SERVICE BRAKES, HYDRAULIC. Diagnosis of DTCs C1249, C1531 and C0054
06-59-17R2018-06-18. Service bulletin. SERVICE BRAKES, AIR:DISC:PADS. This Service Information bulletin announces availability of a new front brake pad shim kit to specifically address customer concerns of a squeaking or squealing sound on the models listed. The new shims incorporate a new laminated design with increased damping characteristics to eliminate vibration identified as the root cause of the sound. The new kits include shims only (NO brake pads).
07-128-18R2018-03-13. Service bulletin. SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES; EXTERIOR LIGHTING:BACK UP LIGHTS. This Service Information bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system?s warning lamp to illuminate.
06-55-16R2017-10-27. Service bulletin. EXTERIOR LIGHTING; SERVICE BRAKES. (ALL EXCEPT Hybrid Models) REVISED This bulletin announces a design change to the brake light switch (BLS) to reduce the possibility of improper illumination of the ABS and/or VDC warning lamp. In the event a product containing silicone is used to lubricate the BLS or for other purposes in the area around the switch, a non-conductive coating may develop over time on the internal electrical contacts and affect operation of the switch. On / Off signal output from the BLS is critical for proper operation of various systems on the vehicle. When the switch does not operate properly, warning lamps illuminate and DTCs are stored. A table with BLS-related DTCs and additional information is provided in the Service Procedure information. A photo of the switch changes is shown below. This bulletin also provides a diagnostic and adjustment procedure to be used when diagnosing brake light switch-related DTCs.
06-50-152017-02-22. Service bulletin. SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER; EQUIPMENT; SERVICE BRAKES. THIS BULLETIN INFORMS OF A PARTS CHANGE TO THE BRAKE SYSTEM MASTER CYLINDER AND VACUUM BOOSTER. WHENEVER REPLACEMENT OF EITHER OF THESE COMPONENTS IS REQUIRED, THE IDENTIFICATION PROCEDURE PROVIDED BELOW MUST BE FOLLOWED TO INSURE THE PROPER PARTS ARE ORDERED AND INSTALLED AS A SET.
SB-06-50-152016-06-17. Service bulletin. EQUIPMENT; SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER. SUMMARY TO BE PROVIDED ON A FUTURE DATE.
06-44-12R2016-05-23. Service bulletin. SERVICE BRAKES. SUMMARY TO BE PROVIDED ON A FUTURE DATE.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.