Service bulletins for the 2016 Subaru WRX
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
429 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
| WUK-96 | 2020-01-07. Service bulletin. ENGINE AND ENGINE COOLING. Subaru of America, Inc. (Subaru) is initiating a service campaign for certain 2015-2018 Forester 2.0L Turbo and 2016-2018 WRX models which may experience a loosening of the front exhaust pipe nuts. On certain affected vehicles, the six (6) front exhaust pipe (EPF) nuts at the cylinder heads may not have been tightened sufficiently due to variations in production. As a result, these nuts may become loose during use and cause exhaust leakage. A leak occurring at the front exhaust pipe may result in deterioration of emission performance. As a result, affected vehicle may fail to meet emission levels certified by the EPA and/or California ARB. |
|---|---|
| Subaru Announ | 2020-01-07. Service bulletin. ENGINE AND ENGINE COOLING. Subaru of America, Inc. (Subaru) is initiating a service campaign/ voluntary emissions recall for certain 2015-2018 Forester 2.0L Turbo and 2016-2018 WRX models which may experience a loosening of the fornt exhaust pip nuts. |
| Subarunet Announ | 2020-01-07. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE. Subaru of America, Inc. (Subaru) is initiating a service campaign/ voluntary emissions recall for certain 2015-2018 Forester 2.0L Turbo and 2016-2018 WRX models which may experience a loosening of the fornt exhaust pip nuts. |
| 07-146-19R | 2019-12-02. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. "This bulletin announces a design change made to the engine wiring harness to improve resistance to moisture. A detailed illustration describing the change is supplied below." |
| 02-131-12R | 2019-10-01. Service bulletin. ENGINE AND ENGINE COOLING. The purpose of this Bulletin is to provide procedures for the diagnosis and repair of oil seepage which may be coming from the timing chain cover, front camshaft cap, camshaft carrier and / or upper oil pan. There are five areas that should be closely inspected if an oil leak is reported by the customer: 1. The 6mm tapped hole casting boss area in the left-hand camshaft cap 2. The sealing surfaces between either the left or right-hand camshaft cap and camshaft carrier 3. The sealing surfaces between the cylinder head and camshaft carrier 4. The sealing surface between the upper oil pan and the engine block 5. The sealing surfaces of the front timing chain cover |
| 16-103-16R | 2019-10-01. Service bulletin. POWER TRAIN. This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Investigation has identified likely sources of the seepage to be the sealant used on the CVT’s oil pump chain cover and the input shaft oil seal. The repair involves chain cover removal, a thorough cleaning and inspection of the sealing surfaces followed by re-sealing the cover and replacement of the input shaft oil seal with the new, redesigned type. |
| 12-271-19 | 2019-09-05. Service bulletin. STRUCTURE. This Service Information Bulletin announces a design change made to the rear bumper cover side mounting brackets. These new brackets provide increased clearance between the edges of the bumper cover and the corresponding quarter panels. This change will prevent them from contacting each other and possibly damaging their painted surfaces. |
| 16-103-16R | 2019-09-05. Service bulletin. POWER TRAIN. "This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Investigation has identified likely sources of the seepage to be the sealant used on the CVT’s oil pump chain cover and the input shaft oil seal. The repair involves chain cover removal, a thorough cleaning and inspection of the sealing surfaces followed by re-sealing the cover and replacement of the input shaft oil seal with the new, redesigned type" |
| 15-190-15R | 2019-09-05. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL; EQUIPMENT. This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. The exchange program policy can also be found in Sections 8.4.9 and 11.2.10 of your Claims Policies and Procedures Manual found in subarunet |
| 15-205-16R | 2019-08-30. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL. This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving “Gen 2” F10 Navigation and Display Audio units with 7” display. The procedure will involve downloading the applicable software update files then loading them onto two flash drives for audio unit installation. |
| 11-191-19R | 2019-08-30. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. This bulletin announces availability of a new Engine Control Module (ECM) for the models listed above designed to address DTC P2610: “ECM/PCM ENGINE OFF TIMER PERFORMANCE”. Under certain RARE conditions, an electrostatic surge may influence the ECM’s internal timer used after the engine is turned off and store a DTC P2610 in memory. Hardware in the ECM has been changed to eliminate any impact from electrostatic surges. |
| 11-191-19 | 2019-08-06. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM. This bulletin announces availability of a new Engine Control Module (ECM) for the models listed above designed to address DTC P2610: “ECM/PCM ENGINE OFF TIMER PERFORMANCE”. Under certain RARE conditions, an electrostatic surge may influence the ECM’s internal timer used after the engine is turned off and store a DTC P2610 in memory. Hardware in the ECM has been changed to eliminate any impact from electrostatic surges. |
| 15-177-14R | 2019-08-06. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL. All 2015-2017 MY vehicles with Fujitsu TEN (F10) 7in. Multimedia Navigation (AVN) & Display Audio Units. This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when operating the new-generation “Gen 2” and “Gen 2.1” F10 Navigation and Display Audio systems. We will continue to add more helpful tips to this TSB as they become available. |
| 06-65-18R | 2019-08-06. Service bulletin. ELECTRONIC STABILITY CONTROL (ESC); SERVICE BRAKES, HYDRAULIC. This bulletin announces a new Vehicle Dynamics Control (VDC) Module and Hydraulic Control Unit (VDCCM&HCU). The new part was designed to address a small number of customer concerns regarding a clicking or ticking-type sound heard coming from the driver’s side footrest area. The new modules incorporate logic with enhanced internal solenoid and motor control characteristics. |
| 07-152-19R | 2019-08-06. Service bulletin. VISIBILITY:POWER WINDOW DEVICES AND CONTROLS; ELECTRICAL SYSTEM; VISIBILITY. "This bulletin announces availability of new power window switch assemblies developed to address the following customer concerns: • Power windows inoperative from the driver’s door master and / or passenger front door switch • Unable to remotely operate other door windows from the driver’s door master switch • One-Touch Auto Up / Down features inoperative from either / both front door switches" |
| 06-68-19R | 2019-08-06. Service bulletin. SERVICE BRAKES, HYDRAULIC. This Service Information bulletin announces instruction for application of additional lubrication between the brake caliper support and pad clips. This will prevent the pad from dragging due to corrosion buildup which may result in uneven or premature wear of the replacement brake pads. This additional instruction applies to all models with brake pads using the upper and lower pad clips and has been added to the brake pad installation procedures found in the related Service Manuals. |
| WUE-90 tool | 2019-08-06. Service bulletin. EXTERIOR LIGHTING:BRAKE LIGHTS; ELECTRICAL SYSTEM; EXTERIOR LIGHTING; EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH. SOA has received multiple requests for additional 83399Fj000rt BRAKE LIGHT SWITCH tools and now has sufficient stock to allow retailers to place orders for single tools. |
| 02-163-16R | 2019-07-22. Service bulletin. ENGINE. This Service Information bulletin provides new inspection and repair procedures for AVCS (Active Valve Control System) -related DTCs on the FA and FB engine equipped models listed above. The applicable Service Manuals will be revised with this new information in the near future. |
| 15-205-16R | 2019-07-22. Service bulletin. EQUIPMENT:ELECTRICAL; EQUIPMENT. This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio units with 7? display. The procedure will involve downloading the applicable software update files then loading them onto two flash drives for audio unit installation. |
| 02-182-19 | 2019-07-01. Service bulletin. STRUCTURE; EQUIPMENT. This Service Information bulletin announces a design change made to the TGV assemblies used on the Forester Turbo models and WRXs listed above. Condensation resulting from EGR system operation may enter the area between the TGV shaft and bearing. Over time, corrosion can develop and impede movement of the TGV shaft and cause any of the DTCs P2004, 2005, 2006 and /or P2007 to set. The material of the TGV shaft has been changed to stainless steel to optimize corrosion resistance. |
| Subaru Tech Tips | 2019-07-01. Service bulletin. EQUIPMENT. Subaru Service and Technical Support Line Newletter. |
| 12-264-19 | 2019-07-01. Service bulletin. EQUIPMENT. This Service Information bulletin announces a design change made to the retaining bolt used to secure the child anchors to the rear shelf plates on the models listed above. This change was made in support of parts communization with other similar mounting bolts. There is no change between the old and new bolt in terms of function or durability. |
| 14-22-16R | 2019-07-01. Service bulletin. EQUIPMENT. To help reduce confusion and increase technician efficiency, Subaru of America, Inc. (SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool. |
| 07-152-19 | 2019-07-01. Service bulletin. ELECTRICAL SYSTEM; VISIBILITY. This bulletin announces availability of new power window switch assemblies developed to address the following customer concerns: ? Power windows inoperative from the driver?s door master and / or passenger front door switch ? Unable to remotely operate other door windows from the driver?s door master switch ? One-Touch Auto Up / Down features inoperative from either / both front door switches |
| 04-17-17-R | 2019-07-01. Service bulletin. STEERING. This bulletin provides a service procedure to address isolated customer concerns of a rattling sound identified as coming from the Electronic Power Steering (EPS) gear box (steering rack) assembly. The repair (when applicable) involves installation of a new tension spring for the worm gear to reduce / eliminate the condition. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.