WenmarOpen by Wenmar Pro

Service bulletins for the 2025 Ram 2500

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

318 on file from NHTSA, as of 2026-10-19.

About P032F on the 2025 Ram 2500: what the code means, and the bulletins and recalls about the same components.

By type

By component

By trouble code

Only bulletins with trouble code: P032F are shown. Show all

Bulletins, newest first
18-038-26 REV. A2026-08-06. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle exhibit/set SYMPTOM: one or more of the following Diagnostic Trouble Codes (DTCs): ● P219A - Bank 1 Air-Fuel Ratio Imbalance. ● P219B - Bank 2 Air-fuel Ratio Imbalance. ● P032F - Combustion Engine Producing Insufficient Torque. NOTE: This revision has an updated and more effective fix for DTC P219B than the prior version. Customers may experience one or more of the following: ● **Power Take Off (PTO) may cancel during engagement with high PTO loads.** ● Engine speed surging, unstable, hunting, or oscillating while coasting at low vehicle speeds. ● Stationary Idle PTO feature is not activating when the user configuration is selected to require parking brake be set (DD/DP Only). ● PTO not auto-resuming after hard-wired remote start (DD/DP Only). ● Driveline clunk or bump when coasting to a stop in cruise control mode. ● Engine idle undershoot or delayed response with power steering input. In addition, the following software enhancement(s) is available: ● Increase the duration that PTO related messages are displayed on the Instrument Panel Cluster (IPC) (DD/DP Only). This bulletin involves reprogramming the PCM with the latest available software.
18-014-26 REV. A2026-04-29. Service bulletin. ENGINE. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P0088-00 - Fuel Rail Pressure Too High - Bank 1.** ● P20CF-00 - Exhaust After treatment Fuel Injector "A" Stuck Open. ● P20DB-00 - Exhaust After treatment Fuel Supply Control Stuck Open. ● U0109-00 - Lost Communication With Fuel Pump Control Module. ● P1451-00 - Diesel Particulate Filter System Performance. ● P2463-00 - Diesel Particulate Filter Restriction - Soot Accumulation Bank 1. ● P2459-00 - Diesel Particulate Filter Regeneration Too Frequent. ● P0087-00 - Fuel Rail Pressure Too Low. ● P2540-00 - Low Pressure Fuel System Sensor Circuit Range/performance. ● P2543-00 - Low Pressure Fuel System Sensor Circuit Intermittent. ● P214D-00 - SCR NOX Catalyst Outlet Temperature Too High During Particulate Filter Regeneration. ● P242B-00 - Exhaust Gas Temperature Sensor Circuit Performance - Bank 1 Sensor 3. ● P24DA-00 - Particulate Matter Sensor Exhaust Sample Error Bank 1. ● P20EE-00 - SCR Nox Catalyst Efficiency Below Threshold - Bank 1 Catalyst 1. ● P226C-00 - Turbocharger Boost Control "A" Slow Response. ● P2281-00 - Air Leak Between MAF And Throttle Body. ● P229F-00 - NOX Sensor Circuit Range/performance - Bank 1. ● P0100-00 - Mass Or Volume Air Flow Sensor "A" Circuit. ● P203F-00 - Reductant Level Too Low. ● P0423-00 - Heated Catalyst Efficiency Below Threshold Bank 1. ● P0263-00 - Cylinder 1 Contribution-Balance. ● P0266-00 - Cylinder 2 Contribution-Balance. ● P0269-00 - Cylinder 3 Contribution-Balance. ● P0272-00 - Cylinder 4 Contribution-Balance. ● P0275-00 - Cylinder 5 Contribution-Balance. ● P0278-00 - Cylinder 6 Contribution/Balance. ● P026B-00 - Injection Timing Performance. ● P020A-00 - Cylinder 1 Injection Timing. ● P020B-00 - Cylinder 2 Injection Timing. ● P020C-00 - Cylinder 3 Injection Timing. ● P020D-00 - Cylinder 4 Injection Timing. ● P020E-00 - Cylinder 5 Injection Timing. ● P020F-00 - Cylinder 6 Injection Timing. ● P06B9-00 - Cylinder 1 Glow Plug Circuit Performance. ● P06BA-00 - Cylinder 2 Glow Plug Circuit Performance. ● P06BB-00 - Cylinder 3 Glow Plug Circuit Performance. ● P06BC-00 - Cylinder 4 Glow Plug Circuit Performance. ● P06BD-00 - Cylinder 5 Glow Plug Circuit Performance. ● P06BE-00 - Cylinder 6 Glow Plug Circuit Performance. Customers may also comment on one or more of the following: ● Long engine crank times, particularly after fuel filter change. ● Inverter drops out when shifting from P to D gears. ● Diesel Exhaust Fluid (DEF) level gauge slow to update after a refill. ● Poor cold start performance. ● Cruise control drops out/cancels on its own. ● Engine stumble, runs rough, or a slight lack of power. The following software enhancements are also available: ● Reduce the occurrence of false faults Diagnostic Trouble Codes (DTCs) P0300-00, **P0088-00** and P0315-00. ● Improved troubleshooting and repair accuracy for air handling components through APT test in wiTECH. ● DTC P1451-00 re-tune to reduce false faults. ● Improvements to allow DTC P2509-00 faults to be cleared with wiTECH. ● Adaptive Cruise Control (ACC) software fix to prevent cruise control dropouts. ● Engine stumble fix for improved drivability. ● Engine stall detection allowing DTC P032F-00 to clear after a power cycle. ● Allow multiple PROXI rewrites. ● Enable cold re-prime (DTC P208B-00 improvement) This bulletin involves inspecting and possibly reprogramming the Engine Control Module (ECM/PCM) with the latest available software
18-038-262026-03-18. Service bulletin. ENGINE. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle exhibit/set **one or more of the following Diagnostic Trouble Codes (DTCs)**: ● **P219A - Bank 1 Air-Fuel Ratio Imbalance. ● P219B - Bank 2 Air-fuel Ratio Imbalance.** ● P032F - Combustion Engine Producing Insufficient Torque. Customers may experience one or more of the following: ● **Engine speed surging, unstable, hunting, or oscillating while coasting at low vehicle speeds. ● Stationary Idle Power Take off (PTO) feature is not activating when the user configuration is selected to require parking brake be set (DD/DP Only). ● PTO not auto-resuming after hard-wired remote start (DD/DP Only).** ● Driveline clunk or bump when coasting to a stop **in cruise control mode.** ● Engine idle undershoot or delayed response with power steering input. **In addition, the following software enhancement(s) is available: ● Increase the duration that PTO related messages are displayed on the Instrument Panel Cluster (IPC) (DD/DP Only).** This bulletin involves reprogramming the PCM with the latest available software.
18-020-25 REV. B2025-10-08. Service bulletin. UNKNOWN OR OTHER. Flash: Powertrain Control Module (PCM) Updates *Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs):** ● **P0263 - 00 Cylinder 1 Contribution/balance. ● P0266 - 00 Cylinder 2 Contribution-balance. ● P0269 - 00 Cylinder 3 Contribution/balance. ● P0272 - 00 Cylinder 4 Contribution/balance. ● P0275 - 00 Cylinder 5 Contribution/balance. ● P0278 - 00 Cylinder 6 Contribution/balance. ● P026B - 00 Injection Timing Performance. ● P020A - 00 Cylinder 1 Injection Timing. ● P020B - 00 Cylinder 2 Injection Timing. ● P020C - 00 Cylinder 3 Injection Timing. ● P020D - 00 Cylinder 4 Injection Timing. ● P020E - 00 Cylinder 5 Injection Timing. ● P020F - 00 Cylinder 6 Injection Timing. ● P06B9 - 00 Cylinder 1 Glow Plug Circuit Performance. ● P06BA - 00 Cylinder 2 Glow Plug Circuit Performance. ● P06BB - 00 Cylinder 3 Glow Plug Circuit Performance. ● P06BC - 00 Cylinder 4 Glow Plug Circuit Performance. ● P06BD - 00 Cylinder 5 Glow Plug Circuit Performance. ● P06BE - 00 Cylinder 6 Glow Plug Circuit Performance. ● P0072 - 00 Ambient Air Temperature Sensor Circuit "A" Low. ● P0087 - 00 Fuel Rail Pressure Too Low. ● P2540 - 00 Low Pressure Fuel System Sensor Circuit Range/Performance. ● P2543 - 00 Low Pressure Fuel System Sensor Circuit Intermittent. ● P0100 - 00 Mass Or Volume Air Flow Sensor "A" Circuit. ● P203F - 00 Reductant Level Too Low. ● P0423 - 00 Heated Catalyst Efficiency Below Threshold Bank 1. ● P20EE - 00 SCR NOX Catalyst Efficiency Below Threshold - Bank 1 Catalyst 1. ● P226C - 00 Turbocharger Boost Control "A" Slow Response. ● P2281 - 00 Air Leak Between MAF And Throttle Body. ● P229F - 00 NOX Sensor Circuit Range/Performance - Bank 1. ● P24DA - 00 Particulate Matter Sensor Exhaust Sample Error Bank 1. ● P214D - 00 SCR NOX Catalyst Outlet Temperature Too High During Particulate Filter Regeneration. ● P242B - 00 Exhaust Gas Temperature Sensor Circuit High - Bank 1 Sensor 3.** Customers may comment on one or more of the following: ● **Poor cold start performance. ● DEF level gauge slow to update after refill. ● Inverter drops out when shifting from Park to Drive.** ● Check engine light illuminated. ● Cruise control drops out/cancels on its own. ● Engine stumble, runs rough, or a slight lack of power. The following software enhancements are also available: ● **Improved troubleshooting and repair accuracy for air handling components through APT test available in WiTECH.** ● Reduce the occurrence of false faults Diagnostic Trouble Codes (DTCs) P0300 and P0315. ● DTC P1451 re-tune to reduce false faults. ● Improvements to allow DTC P2509 faults to be cleared with wiTECH. ● Adaptive Cruise Control (ACC) software fix to prevent cruise control dropouts. ● Engine stumble fix for improved drivability. ● Engine stall detection allowing DTC P032F to clear after a power cycle. ● Allow multiple PROXI rewrites. ● Enable cold re-prime (DTC P208B improvement). This bulletin involves inspecting and possibly reprogramming the Engine Control Module (ECM/PCM) with the latest available software
18-051-252025-07-09. Service bulletin. ELECTRICAL SYSTEM. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P032F - Combustion Engine Producing Insufficient Torque. Customers may experience one or more of the following: ● Driveline clunk or bump when coasting to a stop. ● Engine idle undershoot or delayed response with power steering input. This bulletin involves reprogramming the PCM with the latest available software.
18-020-25 REV. A2025-05-20. Service bulletin. POWER TRAIN. "Flash: Powertrain Control Module (PCM) Updates Customers may comment on one or more of the following: ● Malfunction Indicator Lamp (MIL) or check engine light illuminated. ● Cruise control drops out/cancels on its own. ● Engine stumble, runs rough, or a slight lack of power. The following software enhancements are also available: ● Reduce the occurrence of false faults Diagnostic Trouble Codes (DTCs) P0300 and P0315. ● DTC P1451 re-tune to reduce false faults. ● Improvements to allow DTC P2509 faults to be cleared with wiTECH. ● Adaptive Cruise Control (ACC) software fix to prevent cruise control dropouts. ● Engine stumble fix for improved drivability ● Engine stall detection allowing DTC P032F to clear after a power cycle. ● Allow multiple PROXI rewrites. ● Enable cold re-prime (DTC P208B improvement) This bulletin involves **inspecting and possibly** reprogramming the Engine Control Module (ECM/PCM) with the latest available software"
18-020-252025-04-23. Service bulletin. POWER TRAIN. "Flash: Powertrain Control Module (PCM) Updates Customers may comment on one or more of the following: ● Malfunction Indicator Lamp (MIL) or check engine light illuminated. ● Cruise control drops out/cancels on its own. ● Engine stumble, runs rough, or a slight lack of power. The following software enhancements are also available: ● Reduce the occurrence of false faults DTCs P0300 and P0315. ● DTC P1451 retune to reduce false faults. ● Improvements to allow DTC P2509 faults to be cleared with wiTECH. ● Adaptive Cruise Control (ACC) software fix to prevent cruise control dropouts. ● Engine stumble fix for improved drivability ● Engine stall detection allowing DTC P032F to clear after a power cycle. ● Allow multiple PROXI rewrites. ● Enable cold reprime (DTC P208B improvement). This bulletin involves reprogramming the Engine Control Module (ECM/PCM) with the latest available software"

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.