WenmarOpen by Wenmar Pro

Service bulletins for the 2017 Ram 2500

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

385 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Backup camera are shown. Show all

Bulletins, newest first
1032892025-03-04. Service bulletin. BACK OVER PREVENTION: WARNINGS; LANE DEPARTURE: BLIND SPOT DETECTION. CAMERA - REAR VIEW
S1623000028 Rev.2023-02-13. Service bulletin. VEHICLE SPEED CONTROL; BACK OVER PREVENTION; POWER TRAIN; VISIBILITY; PARKING BRAKE. Outside Power Fold Rearview Mirror Noise Or Loose At Pivot. Mirror Contacts Door Window Glass In The Folded Position.
S1625000003 Rev.2023-02-13. Service bulletin. BACK OVER PREVENTION; EXTERIOR LIGHTING. Malfunction Indicator Lamp (MIL) Illumination. NOx Sensor Diagnostic Trouble Codes (DTCs) Diagnosis Information.
05005172022-10-31. Service bulletin. FUEL SYSTEM, GASOLINE; BACK OVER PREVENTION; WHEELS; LANE DEPARTURE; SERVICE BRAKES. Left Front Brake Hose Weepage This bulletin involves inspecting the left front brake hose and Wheel Speed Sensor (WSS) wire harness, replace if needed. Customers may notice a low brake fluid and/or Anti-Lock Brake System (ABS) warning indicator(s) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set:C0031-1D - Left Front Wheel Speed Sensor - Circuit Current Out Of Range. C0031-2F - Left Front Wheel Speed Sensor - Signal Erratic. C0031-62 - Left Front Wheel Speed Sensor - Signal Compare Failure. C0049-7B - Brake Fluid - Low Fluid Level.
08053172022-10-31. Service bulletin. EQUIPMENT:ELECTRICAL; BACK OVER PREVENTION:DISPLAY FUNCTION. RA3 and RA4 Radio Enhancements This bulletin involves inspecting and if required, updating the radio software. Customers may experience one or more of the following:Radio functions/touchscreen locks up (does not affect backup camera). Phone presets do not save. ?Navigation Failed? message is displayed. Navigation is inoperative or inaccurate. CD player will not play songs and/or locks up the radio. Clock will not automatically update to local time. Clock may be off by several hours. (RA3 only). Poor or no connection to cellular network. ?Charge Complete? notification is not received (RU PHEV only). Some Uconnect® App remote commands do not execute with the vehicle. Radio Apps are inoperative. Radio display screen is black or blank. Battery drain - due to radio staying on. Navigation failed message is displayed. Clock not automatically updating to local time. Improvements:Auto Play can now be configured. Media devices, Phone pairing and Bluetooth® usage improvements. Add the ability to drag and drop icons into the menu bar. Adds ?Do Not Disturb? text message feature. Fix for radio locks up/frozen. Fix for radio loses time. Enhanced Voice recognition (VR) performance. Media devices, phone pairing and Bluetooth usage improvements. Improved tuner performance. Human Machine Interface (HMI) improvements. Satellite radio reception improvements.
90037182022-10-31. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM. Rear View Camera In the case for inoperative camera, radio screen is blue or black in reverse mode. Before proceeding with the normal procedure call Ali Ikram at (248) 576-9265 Mon- Fri between 8 am - 4pm. If you do not get a response within 15 minutes continue with the normal diagnostic procedure. Before replacing the camera, please disconnect and clean harness and camera connector. Clean & dry both connectors. If replacing the camera, please replace wire harness also and return parts to QEC.
18073172022-10-24. Service bulletin. BACK OVER PREVENTION; FUEL SYSTEM, GASOLINE; EXTERIOR LIGHTING; SERVICE BRAKES, HYDRAULIC; ELECTRICAL SYSTEM; POWER TRAIN. Flash: Powertrain Diagnostic and System Improvements This bulletin involves reprogramming the Engine Control Module/Powertrain Control Module (ECM/PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following DTCs have been set:P202E - Reductant Injector Performance. P218F - Reductant No Flow Detected. Customers may experience one or more of the following conditions:Unpleasant odor in the vehicle at low speeds and when regeneration is active. Intermittent no crank and no start(68RFE automatic transmission only). Unable to complete ?Fuel Pressure Override? test in the scan tool. In addition, the following software enhancements are also available:Calibration changes to engine-off timer. Changes to engine warm up protection. Hydrocarbon Desorption (HCD) driveability improvements. A/C pressure sensor update. Exhaust Gas Recirculation (EGR) calibration changes. Improved fuel filter reminder calibration. Improved regeneration at low speeds. Updated accelerator pedal calibration to reduce hesitation. Calibration changes to reduce turbo inlet temperatures.
90030592022-08-08. Service bulletin. BACK OVER PREVENTION; ELECTRICAL SYSTEM. Park Assist Sensor 1) Active or Stored DTC of Signal Shape / Waveform Failure fault: B128E-25, B128F-25, B1290-25, B1291-25, B1292-25, B1293-25, B1295-25, B1296-25, B1297-25, and/or B1298-25, check for snow/mud/ice/obstruction and clean the Sensors, both front and back (behind bumper) of sensor. The snow/mud/ice can be behind the bumper, sensor retainer and/or the sensor which may cause customers to think they have an issue since they cleaned the front of the sensor/bumper, but not behind where dirt/mud/ice snow can accumulate. Once the Bumper and Sensors are completely cleaned and clear of snow, mud, ice, and/or obstruction, the sensors must activate in order for the faults to go STORED. After cleaning the Bumper and Sensors, turn off the engine, wait 10 seconds, turn on the engine and then place the vehicle in REVERSE so that the sensors activate. The faults will go STORED. 2) Active or Stored DTC code of Short to Ground fault: B128E-11, B128F-11, B1290-11, B1291-11, B1292-11, B1293-11, B1294-11, B1295-11, B1296-11, and/or B1298-11, or if you have an active or stored DTC code of Performance or Incorrect Operation fault: B128E-92, B128F-92, B1290-92, B1291-92, B1293-92, B1294-92, B1295-92, B1296-92, B1297-92, and/or B1298-92, then check the wiring behind the sensor. Specifically, ensure that the connector behind the park assist sensor is fully mounted. Ensure also, there is no dirt, corrosion, or damage in this connector behind the park assist sensor as this will also cause a Short to Ground fault. With potential wiring issues addressed, the sensors must activate in order for the faults to go STORED. After all sensors are properly connected (you will likely hear a click once the connector is fully seated on the sensor), turn off the engine, wait 10 seconds, turn on the engine and then place the vehicle in REVERSE so that the sensors activate. The faults will go STORED.
S20230000142020-04-27. Service bulletin. BACK OVER PREVENTION. Single Pop Noise From Rear Of Sunroof While Opening
90036362017-11-03. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM. Rear View Camera For trucks equipped with rear view camera part number 68274731A$, if there is a complaint of the rear view camera being inoperative, or the radio screen is black or blue when the truck is in reverse, DO NOT replace the rear camera or perform any repairs until attempting to contact Michael Talbert in Engineering Cell (248) 464- 2043, Monday - Friday between 8am - 7pm EST. If your call is not returned within 15 minutes, proceed with the normal diagnostic process

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.