WenmarOpen by Wenmar Pro

Service bulletins for the 2017 Porsche Panamera

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

790 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Wiring and fuses are shown. Show all

Bulletins, newest first
No. 20242020-10-01. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM:WIRING:CONNECTORS/PLUGS/RECEPTACLES. Information on new special tool - VAS 1978/35 Connector Release Tools.
122-P5G7U-072018-08-06. Service bulletin. ELECTRICAL SYSTEM:WIRING; ENGINE. Oil in the wiring harness. If oil is found in the engine wiring harness during a repair, the wiring harness and all the affected components (including the oil pump control valve) must be replaced.
122-T8S4T-082017-10-25. Service bulletin. ELECTRICAL SYSTEM:WIRING. Cause Incorrect wiring for rear lid release switch. Date of introduction Modified wiring is used during production from November 7, 2016. Remedial action In the event of a customer complaint, rework rear lid release switch wiring using a cable adapter.
122-Y8S5J-082017-10-25. Service bulletin. ELECTRICAL SYSTEM:WIRING. Subject: Wire harness for PASMvalve unit Information: The wire harness for the PASM valve unit is not routed correctly in the area around the heat protection panels for the valve unit on the affected vehicles. Due to relative movements while driving and if significant amounts of dirt get in, this can cause chafing on the wire harness and as a result, faults can be entered in the fault memory and the warning "Chassis system fault" may be displayed in the instrument cluster. As a result, the vehicle level can no longer be set.
122-C4Y4T-102017-10-15. Service bulletin. ELECTRICAL SYSTEM:WIRING. Cause: The wire harness for the TPM control unit can interfere with communication between the TPM control unit and the TPM sensors. The wire harness for the TPM control unit is not routed correctly in the rear axle area. Remedial Action: The routing of the wire harness is changed using an extension of the existing harness wire.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.