WenmarOpen by Wenmar Pro

Service bulletins for the 2017 Porsche 911

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

578 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Automatic transmission are shown. Show all

Bulletins, newest first
WMD12021-06-03. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Porsche intranet posting with preliminary information for Porsche workshop campaign WMD1 Workshop Campaign -PCM Software Update.
No. 20202020-10-01. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Information on new special tool for offline updates of the PCM Versions 4 and 5.
122-C5R5V-102017-11-08. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. During diagnostic monitoring of the hydraulic control valves of the PDK transmission, a fault memory entry is stored in the PDK control unit if an implausible shift rod movement is detected. The PDK control unit therefore initiates a flushing measure in order to flush particles of dirt determined as the cause of the fault out of the hydraulic control valves. As soon as the fault memory entry was activated in two consecutive driving cycles, there was a possibility with the previous diagnostic configuration that the message "Engine control fault ? visit workshop ? Driving permitted" would be displayed in the instrument cluster although the flushing measure had already been carried out successfully and a fault was no longer present. To prevent this from happening, the diagnostic function for monitoring the hydraulic control valves will be adapted accordingly.
122-C4N9A-092016-10-03. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. "THE UNWARRANTED ERROR MESSAGE ""GEARBOX FAULT"" CAN APPEAR SPORADICALLY IN THE INSTRUMENT CLUSTER ON THE AFFECTED VEHICLES BECAUSE THE DIAGNOSTIC FUNCTION FOR THE HYDRAULIC VALVES IN THE PDK TRANSMISSION IS TOO SENSITIVE. IF THIS HAPPENS, THE PDK TRANSMISSION SWITCHES TO THE REDUCED DRIVING PROGRAMMED AND THE CHECK ENGINE LIGHT IN THE INSTRUMENT CLUSTER WILL BE ACTIVATED. RE-PROGRAM THE PDK CONTROL UNIT USING THE PIWIS TESTER WITH TEST SOFTWARE VERSION 16.400.010 (OR HIGHER) INSTALLED."

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.