Recalls that may apply to the 1982 Pontiac 6000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
By component
| 83V007000 | 1983-01-01. SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS. REAR BRAKE HOSES MAY HAVE BEEN MANUFACTURED INCORRECTLY WHEN THE METAL END FITTINGS WERE INSTALLED. SOME REAR BRAKE HOSES MAY SEPARATE FROM THE METAL END FITTINGS WHEN SUBJECTED TO THE PULLING FORCE SPECIFIED BY FEDERAL MOTOR VEHICLE SAFETY STANDARD 106, "BRAKE HOSES". Built 1982-05-01 to 1982-06-01. |
|---|---|
| 82V021000 | 1982-03-08. FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP. UNDER CERTAAIN CONDITIONS, THE HOSE CLAMPS ON THE FUEL TANK FILLER PIPE AND FUEL TANK FILLER VENT PIPE COULD FRACTURE. THE FRACTURE OF THESE CLAMPS COULD CAUSE FUEL LEAKAGE AT ANY OF THE FOUR PIPE TO HOSE CONNECTIONS. LEAKAGE CAN OCCUR DURING REFUELING, OR WHILE DRIVING, IF THE FUEL TANK IS ABOVE 3/4 FULL. Built 1981-02-01 to 1982-01-01. |
| 1983009 | 1983-01-26. THE REAR BRAKE HOSES WERE NOT FULLY SEATED INTO THEIR FITTINGS WHEN THE FITTINGS WERE CRIMPED ONTO THE HOSE AT THE TIME OF MANUFACTURE. HOSE FAILURE WOULD CAUSE LOSS OF BRAKE FLUID AND PARTIAL LOSS OF BRAKING ACTION THEREBY INCREASING STOPPING DISTANCE. |
|---|---|
| 1982026 | 1982-03-03. UNDER CERTAIN CONDITIONS THE HOSE CLAMPS ON THE FUEL FILLER PIPE AND FUEL TANK FILLER VENT PIPE COULD FRACTURE. THIS COULD CAUSE SEEPAGE OF FUEL AT ANY ONE OF THE FOUR PIPE TO HOSE CONNECTIONS WHEN THE FUEL TANK IS ABOVE 3/4 FULL CREATING THE POSSIBILITY OF FIRE. |
A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.