WenmarOpen by Wenmar Pro

Recalls that may apply to the 1999 Plymouth Prowler

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

By component

United States: NHTSA, as of 2026-10-19
03V0340002003-02-05. SUSPENSION:FRONT:CONTROL ARM:LOWER ARM. ON CERTAIN PASSENGER VEHICLES, THE LOWER CONTROL ARM BALL JOINTS MAY EXPERIENCE A LOSS OF LUBRICATION THAT CAN RESULT IN ACCELERATED WEAR AND POSSIBLE SEPARATION FROM THE STEERING KNUCKLE. Built 1997-01-01 to 2002-03-31.
99V3130001999-11-04. STRUCTURE:FRAME AND MEMBERS. VEHICLE DESCRIPTION: PASSENGER VEHICLES. SOME ALUMINUM CASTINGS USED IN THE MANUFACTURE OF THE VEHICLE FRAME MAY HAVE MISSED THE REQUIRED HEAT TREATMENT OPERATION RESULTING IN SOFT FRAME CASTINGS. Built 1999-05-11 to 1999-08-20.
99V2450001999-09-15. INTERIOR LIGHTING. VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE BRAKE SYSTEM ON THESE VEHICLES DOES NOT COMPLY WITH FMVSS NO. 105, "HYDRAULIC BRAKE SYSTEMS." Built 1998-01-01 to 1999-06-30.
98V1040001998-05-14. INTERIOR LIGHTING. VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE BACK LIGHT BULBS FOR THE LIQUID CRYSTAL DISPLAY FOR THE GEAR SHIFT POSITION (PRNDL) AND THE ODOMETER WERE NOT PROPERLY INSTALLED. Built 1998-01-01 to 1998-04-05.
Canada: Transport Canada, as of 2026-10-19
20030312003-02-12. Steering. On certain vehicles, the front lower control arm ball joints could experience a loss of lubrication, which could eventually allow the knuckle to separate from the lower control arm while the vehicle is in operation. A ball joint separation could possibly result in a loss of directional control. Correction: Dealer will replace both front lower control arm ball joints.
19992281999-12-16. Structure. On certain vehicles, aluminum castings used in the manufacture of the vehicle frame may have missed the required heat treatment operation resulting in soft frame castings. Soft frame castings may fracture under expected vehicle operation conditions. If a casting were to fracture, it could compromise vehicle handling or result in a loss of vehicle control and a possible crash without prior warning. Correction: Vehicles will be inspected for soft sub-component frame castings. Owners of vehicles found to have soft frame sub-components will be offered a replacement vehicle.
19991711999-09-28. Brakes. Certain vehicles do not comply with the requirements of CMVSS 105 - Hydraulic Brake Systems. The brake system indicator lamp circuit does not contain the required ground circuit to illuminate the lamp in the event of a brake system hydraulic malfunction. Correction: A wiring jumper will be attached to the brake system pressure differential switch.
19990361999-03-03. Emissions. Certain vehicles do not comply with the requirements of CMVSS 1101 - Emission Device. Vehicles may have been built with a Vehicle Emission Control Information (VECI) label that has an inaccurate evaporative hose routing. Correction: A correct VECI along with installation instructions will be mailed to involved vehicle owners. Dealers will be instructed to assist owners needing help with label installation.
19981121998-06-03. Lights And Instruments. THE BACK LIGHT BULBS FOR THE LIQUID CRYSTAL DISPLAY WHICH INDICATES GEAR SHIFT POSITION (PRNDL) AND THE ODOMETER MAY NOT HAVE BEEN PROPERLY INSTALLED. IF THE BULBS FALL OUT, THE DISPLAY MAY BE DIFFICULT TO READ. CORRECTION: THE INSTRUMENT CLUSTER ASSEMBLY WILL BE REPLACED WITH A CLUSTER THAT HAS BULBS THAT HAVE BEEN PROPERLY TWIST LOCKED IN PLACE.

A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.

Check one vehicle officially

Contains information licensed under the Open Government Licence – Canada.