Recalls that may apply to the 2011 Peterbilt 330
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
By component
| 20V199000 | 2020-04-06. SERVICE BRAKES, AIR:ANTILOCK:ABS WARNING LIGHT; ELECTRONIC STABILITY CONTROL (ESC). PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not illuminate to warn the driver of the loss of ABS. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems," and 136, "Electronic Stability Control System on Heavy Vehicles." |
|---|---|
| 10V198000 | 2010-05-11. SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:ABS WARNING LIGHT. PETERBILT IS RECALLING CERTAIN MODEL YEAR 2010 AND 2011 MODEL 325, 330, 335, 337, 340, AND 348 TRUCKS FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, "AIR BRAKE SYSTEMS." THE ABS MALFUNCTION INDICATOR LAMP MAY BE ILLUMINATED AT ALL TIMES. Built 2008-11-28 to 2010-04-16. |
| 10V162000 | 2010-04-20. LATCHES/LOCKS/LINKAGES:HOOD:LATCH. PETERBILT IS RECALLING CERTAIN MODEL YEAR 2010 AND 2011 MODEL 325, 330, 335, 337, 340, AND 348 TRUCKS. THE HOOD ANTI-BLOWDOWN DEVICE IS DESIGNED TO PREVENT UNINTENDED AND UNEXPECTED HOOD CLOSURE. THE DEVICE WITHIN CAN BECOME HINDERED OR INOPERATIVE DUE TO UNINTENTIONAL LATCH MOVEMENT WHICH INTERFERES WITH THE HOOD PIVOT J-HOOK, LATCH MISALIGNMENT, OR LATCH FALLOUT. Built 2008-11-28 to 2010-04-16. |
| 2020148 | 2020-04-07. Lights And Instruments. Issue: On certain trucks, the warning light for the tractor anti-lock brake system (ABS) may not turn on if the system loses power. If this happens, the driver will not get warning that the ABS is not working properly. Note: This problem would also cause the traction control (TC) and electronic stability control (ESC) lights not to turn on. Safety Risk: If a driver is not warned that the ABS is not working properly, there could be an increased risk of a crash. Corrective Actions: PACCAR will notify owners by mail and instruct you to take your truck to a dealer to update the software for the cab control module (CECU). |
|---|---|
| 2010147 | 2010-05-06. Brakes. On certain vehicles, the terminal for circuit BRN5112-1 could be located in the incorrect cavity of the ABS Relay/Fuse block. Locating the harness in the incorrect cavity will cause the ABS malfunction indicator lamp to be illuminated at all times. The ABS brake system will not be affected by this condition, however, if there is a problem with the ABS system the driver will be informed, which could increase the risk of a crash causing property damage, personal injury or death. Correction: Dealers will reposition the incorrectly located ABS wiring terminal. |
| 2010145 | 2010-05-04. Other. On certain trucks, the hood anti-blowdown device (designed to prevent unintended and unexpected hood closure) can become hindered or inoperative due to unintentional latch movement which interferes with the hood pivot j-hook, latch misalignment, or latch fallout. An unintended latch closure can cause personal injury. Correction: Dealers will install hood anti-blowdown retention cables to the radiator and hood assemblies. |
A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.