WenmarOpen by Wenmar Pro

Recalls that may apply to the 2001 Peterbilt 330

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

By component

United States: NHTSA, as of 2026-10-19
02V0180012002-01-15. SERVICE BRAKES, AIR:SUPPLY:CHECK VALVE. ON CERTAIN HEAVY DUTY TRUCKS EQUIPPED WITH MERITOR WABCO PNEUMATIC ANITLOCK BRAKE SYSTEM (ABS) VALVE PACKAGES, THE ASSEMBLY BOLTS ON THESE VALVE PACKAGES WERE NOT TIGHTENED CORRECTLY. Built 2001-09-04 to 2001-11-05.
01V1790002001-06-05. LATCHES/LOCKS/LINKAGES:DOORS:LATCH. VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS. A CHANGE IN THE INTERNAL LINKAGE OF CERTAIN CAB DOORS HAS CREATED A POSSIBLE BINDING CONDITION. Built 1999-04-12 to 2001-06-04.
01V1650002001-05-21. ELECTRICAL SYSTEM:WIRING:FRONT UNDERHOOD. VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH CUMMINS ISC ENGINES. DIODES (ELECTRONIC DEVICES THAT RESTRICT CURRENT FLOW) CONTAINED IN THE PRE-HEAT CIRCUIT OF CERTAIN ENGINE WIRING HARNESSES WERE NOT PROPERLY INSULATED DURING THE HARNESS MANUFACTURING PROCESS. Built 2001-02-15 to 2001-04-27.
01V0540002001-02-22. SEAT BELTS:FRONT:ANCHORAGE. VEHICLE DESCRIPTION: CLASS 7 AND CLASS 8 VEHICLES. THESE VEHICLES DO NOT COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 207, "SEATING SYSTEM," AND NO. 210, "SEAT BELT ASSEMBLY ANCHORAGES." SOME FASTENERS USED TO ATTACH THE SHOULDER BELT ANCHOR BRACKET TO THE CAB STRUCTURE WERE OMITTED DURING PRODUCTION. Built 1996-01-01 to 2001-01-31.
Canada: Transport Canada, as of 2026-10-19
20020162002-01-28. Airbag. Certain heavy-duty trucks equipped with Meritor Wabco pneumatic antilock brake system (ABS) valve packages. The assembly bolts on these valve packages were not tightened correctly. Bolts torque below specification will not reliably prevent air leakage at the affected abs valve package interface joints once the component begins normal vehicle operation. If air leaks develop at any of the abs valve package interface joints, brake system pressure reductions could occur during braking or normal operation with units equipped with the traction control option, potentially extending stopping distances, possibly resulting in a vehicle crash. Correction: Dealers will tighten the fasteners to the proper specification.
20011752001-06-11. Structure. On certain vehicles, a change in the internal linkage of cab doors has created a possible binding condition. If the linkage binds, full engagement of the door latch may not occur, allowing the door to open inadvertently. Correction: Dealers will modify the door linkage to correct the potential of binding.
20011572001-05-30. Certain heavy duty trucks equipped with Chalmers 1000 Series and 800 Series suspension kits. These suspension kits may have insufficient penetration of the weld attaching the torque rod eye to the torque rod tube. Failure of the weld could result in separation of the eye and tube, causing a lock of axle retention, which could result in loss of vehicle control. Correction: Dealers will replace all Chalmers fixed torque rods on these vehicles.
20011362001-05-24. Electrical. Certain heavy duty trucks equipped with Cummins ISC engines. Diodes contained in the pre-heat circuit of certain engine wiring harnesses were not properly insulated during the harness manufacturing process. This lack of insulation could allow the diodes to contact each other leading to a short circuit and possibly a vehicle fire. Correction: Dealers will inspect the harnesses and remedy, if required, by properly insulating the diodes.
20011022001-05-17. Seats And Restraints. Certain vehicles do not comply with the requirements of CMVSS 210 - Seat Belt Assembly Anchorages." Some fasteners used to attach the shoulder belt anchor bracket to the cab structure were omitted during production. In the event of a crash, the shoulder belt anchorage may not properly restrain the seat occupant, increasing the risk of personal injury. Correction: Dealers will install adddtional huck fasteners in the shoulder belt anchor brackets.

A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.

Check one vehicle officially

Contains information licensed under the Open Government Licence – Canada.