Service bulletins for the 2016 Nissan Versa
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
139 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
| NTB17-042 | 2017-10-25. Service bulletin. SUSPENSION. VERSA SEDAN, VERSA NOTE, AND MICRA SQUEAK IN FRONT SUSPENSION WHEN DRIVING OVER BUMPS IF YOU CONFIRM Squeak noise coming from the stabilizer bushings (see Figure 1) while driving over bumps at slow speeds, NOTE: To confirm the squeak is coming from the stabilizer bushing, it may be necessary to: a. Disconnect the stabilizer connecting rod from the stabilizer bar ? both sides (see Figure 1). b. Drive the vehicle slowly over bumps to confirm the squeak is eliminated. ACTION Replace both stabilizer bushings. - Refer to the Electronic Service Manual (ESM), section FSU-Front Suspension, for stabilizer bushing replacement. - Stabilizer bushings are listed in the Parts Information. |
|---|---|
| NTB17-041 | 2017-10-25. Service bulletin. SERVICE BRAKES, AIR:SUPPLY:QUICK RELEASE VALVE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). ADDITIONAL SERVICE WHEN REPLACING CONTROL VALVE OR TRANSAXLE ASSEMBLY SERVICE INFORMATION After a CVT assembly or control valve replacement, additional service must be completed with CONSULT-III plus (C-III plus). - The original calibration data must first be erased from the TCM and then newcalibration data written. - If the calibration data is not erased, the vehicle can experience drivability concernswhich may result in a CVT issue. Additional Service when Replacing Control Valve or Transaxle Assembly - The following procedures, starting on the next page, must be performed in thisorder. - Check off procedure as they are performed in the order listed below. |
| NTB17-040 | 2017-10-25. Service bulletin. SUSPENSION. REVISED WHEEL ALIGNMENT SPECIFICATIONS SERVICE INFORMATION For the Applied Vehicles, some wheel alignment specifications listed in the Front Suspension (FSU) and Rear Suspension (RSU) sections of the Electronic Service Manual (ESM) have been revised. Updated ESMs will be distributed to the field as quickly as possible. Until the updated ESMs are made available, please use the corrected specifications listed in this bulletin. |
| NTB15-037b | 2017-10-25. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY. VERSA AND SENTRA; CVT VALVE BODY REPLACEMENT WITH CONFIRMED DTC This bulletin has been amended to update the Applied Vehicles and Parts Information. Please discard the previous versions of this bulletin. |
| NTB16-116 | 2017-10-15. Service bulletin. ENGINE. NISSAN; DIAGNOSIS INFORMATION FOR ABS DTC C1130 SERVICE INFORMATION When diagnosing for DTC C1130 (ENGINE SIGNAL): ECM related DTCs (P-codes) must be diagnosed, repaired, and DTCs erased first. - DTC C1130 is an ABS DTC that indicates an output signal of the ECM is not recognized. - Absent or incorrect ECM signals, that are indicated by corresponding P-codes, may trigger C1130 in the ABS control unit. - Some vehicle features that can be affected by absent or incorrect ECM signals are: - Forward Emergency Braking (FEB) - Intelligent Cruise Control (ICC) - VDC/ABS/TCS |
| NTB17-082a | 2017-10-15. Service bulletin. SERVICE BRAKES, AIR:SUPPLY:CHECK VALVE. NISSAN; DTC P0456 CAUSED BY EVAP LEAK AT VENT CONTROL VALVE O-RING This bulletin has been amended. The APPLIED VEHICLES and CLAIMS INFORMATION sections have been revised. No other changes have been made. Please discard previous versions of this bulletin. |
| NTB13-100d | 2017-10-12. Service bulletin. ENGINE AND ENGINE COOLING. ENGINE TURNS OFF OR HESITATES WHEN ACCELERATING FROM A STOP DURING HOT AMBIENT TEMPERATURES (+100°F) This bulletin has been amended. The APPLIED VEHICLES section and Table A on page 5 have been revised. No other changes have been made. Please discard previous versions of this bulletin. |
| NTB11-044b | 2017-10-12. Service bulletin. WHEELS; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. WHEEL BALANCING SERVICE INFORMATION This bulletin has been amended. The publication date has been revised to include the latest models and model years. No other changes have been made. Please discard previous versions of this bulletin. |
| NTB13-077c | 2017-09-14. Service bulletin. POWER TRAIN. CVT FLUID LEVEL CHECK SERVICE INFORMATION This bulletin applies only to vehicles equipped with a Continuously Variable Transmission (CVT). This bulletin has been amended. The APPLIED VEHICLES section has been revised. No other changes have been made. Please discard all previous versions of this bulletin. |
| NTB12-055f | 2017-08-25. Service bulletin. POWER TRAIN:AXLE ASSEMBLY. CLICKING NOISE FROM FRONT OR REAR AXLE DURING TAKE-OFF/ACCELERATION This bulletin has been amended. The APPLIED VEHICLES section has been revised. No other changes have been made. Please discard previous versions of this bulletin. |
| NTB17-030 | 2017-08-01. Service bulletin. FUEL SYSTEM, GASOLINE; FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY. NISSAN; FUEL TANK IS SLOW OR DIFFICULT TO FILL IF YOU CONFIRM The fuel tank is slow or difficult to fill (filling nozzle shuts off before tank is full). IMPORTANT: Make sure this incident has been duplicated at a gas station by dealer service staff. ACTION Perform the Service Procedure in this bulletin, starting on the next page. |
| NTB16-123 | 2017-08-01. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY. PLASTIC INTERIOR TRIM PROTECTIVE COVERING REMOVAL SERVICE INFORMATION Vehicles are delivered with plastic interior trim protective covering on the front and rear seats, front and rear door panel finishers, steering wheel, and sun visors (see examples on page 2). When removing the protective covering, care must be used to avoid scuffs, scrapes, cuts, and other abrasive contact to interior trim components. DO NOT use sharp objects like razor blades, box cutters, knives, etc. when removing the plastic interior trim protective covering. IMPORTANT All soft trim described in this bulletin is on automatic return to NNA. Any trim found damaged in the way described in this bulletin will be charged back to the dealer. |
| NTB13-097D | 2017-02-14. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. "ALL MODEL YEAR 2012 AND NEWER NISSAN VEHICLES; EVAP LEAK DTC P0442, P0455, P0456 INFORMATION THIS BULLETIN HAS BEEN AMENDED. THE TITLE HAS BEEN REVISED, AND THE BULLETIN NOW INCLUDES VEHICLES IN PRODUCTION AS OF THE DATE OF THIS UPDATE. NO OTHER CHANGES HAVE BEEN MADE. PLEASE DISCARD ALL PREVIOUS VERSIONS OF THIS BULLETIN." |
| NTB16063 | 2017-02-07. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM:IGNITION. WORN IGNITION KEY WILL NOT TURN THE IGNITION SWITCH |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.