WenmarOpen by Wenmar Pro

Service bulletins for the 2020 Nissan Titan

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

162 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Bulletins, newest first
NTB20-0662020-10-08. Service bulletin. LANE DEPARTURE; ELECTRICAL SYSTEM. LANE CAMERA AIMING VEHICLE REFERENCE VALUES NOT IN ESM SERVICE INFORMATION If the lane camera requires aiming, the values in Table A on page 4 must be used. • For all other models/model years, consult the Electronic Service Manual (ESM). The following CONSULT-III plus (C-III plus) figures and steps are only provided to indicate where the VEHICLE REFERENCE VALUE from Table A is to be entered. The entire camera aiming procedure must be followed to complete the aiming procedure. • Refer to the ESM section: CRUISE CONTROL & DRIVER ASSISTANCE > DRIVER ASSISTANCE SYSTEM > DRIVER ASSISTANCE SYSTEM > BASIC INSPECTION > LANE CAMERA UNIT > CAMERA AIMING ADJUSTMENT. 1. Turn the ignition ON. 2. From the C-III plus home screen, select Diagnosis (One System).
NTB20-0622020-10-08. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; ELECTRICAL SYSTEM. 2020 TITAN/TITAN XD; MIL ON WITH P2096, P2097, P2098 OR P2099 STORED SERVICE INFORMATION If the following DTCs are stored together, it is possible that the O2 sensor harness routing at the transmission has been unintentionally swapped between bank 1 and bank 2. • P2096 (A/F SENSOR 1 B1) and P2099 (A/F SENSOR 1 B2), OR • P2096 (A/F SENSOR 1 B1) and P2098 (A/F SENSOR 1 B2), OR • P2097 (A/F SENSOR 1 B1) and P2099 (A/F SENSOR 1 B2), OR • P2097 (A/F SENSOR 1 B1) and P2098 (A/F SENSOR 1 B2). Refer to Figure 1 for 2WD and Figure 2 for 4WD on page 2, for the correct routing of the related wiring harness.
REVISION 3 - PC72020-08-09. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. Audio Visual (AV) Control Unit Screen REVISED July 17, 2020 Please discard earlier versions of this bulletin. The announcement from June 10, 2020 has been revised to include the following: Dealers may order parts for all affected vehicles via DBS beginning July 21, 2020. Dealer DBS placed orders will be fulfilled within three business days Parts will be on restriction until August 17, 2020 Dealers may order additional parts, as needed, via normal ordering process beginning August 18, 2020
NTB20-0532020-08-09. Service bulletin. ENGINE AND ENGINE COOLING; EQUIPMENT. 2020 TITAN 4WD; VIBRATION WHILE DRIVING ABOVE 3,500 RPM IF YOU CONFIRM A vibration is present while driving with the engine speed above 3,500 RPM. ACTION 1. Diagnose the fan coupler. 2. Install the fan coupler kit listed in PARTS INFORMATION, if applicable. The fan coupler kit includes a new fan coupler, fan pulley and fan bracket.
NTB20-038a2020-08-09. Service bulletin. EQUIPMENT; POWER TRAIN. 2020 TITAN AND TITAN XD; DTC P288B STORED IN THE TCM This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB20-029a2020-08-09. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. 2020 TITAN AND TITAN XD; TELEMATICS (IVC) SERVICE INFORMATION SERVICE INFORMATION The vehicles listed under APPLIED VEHICLES that come equipped with a factory installed SOS switch, located near the overhead map lamp, also come equipped with a wireless communication device called a Telematics Communication Unit (TCU). With an active NissanConnect Services™ subscription, the TCU communicates with the Nissan Data Center to provide various security and convenience services. This bulletin contains important service procedures that must be performed properly in order to set up and maintain the telematics/in-vehicle communications (IVC) system for the vehicles listed under APPLIED VEHICLES. • A table has been provided, on the next page, that lists the steps required to successfully configure a TCU after it has been replaced. • A check-off sheet has been provided in this bulletin to print and check off steps as they are completed. Staple the completed check-off sheet to the repair order.
REVISION 2 - PC72020-07-10. Service bulletin. EQUIPMENT:ELECTRICAL; EQUIPMENT ADAPTIVE/MOBILITY. Audio Visual (AV) Control Unit Screen REVISED June 10, 2020 Please discard earlier versions of this bulletin. The announcement from June 4, 2020 has been revised to include the following: • Nissan continues to work with our supplier to accelerate part availability • A manual ordering process has been established for order priority
REVISION 1 - PC72020-07-10. Service bulletin. EQUIPMENT:ELECTRICAL; EQUIPMENT ADAPTIVE/MOBILITY. Audio Visual (AV) Control Unit Screen REVISED June 4, 2020 Please discard earlier versions of this bulletin. The announcement from May 19, 2020 has been revised to include the following: • Nissan is working with the supplier to accelerate the procurement of parts. Nissan anticipates the repair and a small quantity of parts will be available in mid-June. A follow up communication will be sent out at that time.
NTB20-0422020-07-10. Service bulletin. EQUIPMENT:ELECTRICAL. 2020 TITAN AND TITAN XD; AV CONTROL UNIT REPLACEMENT PROCESS IF YOU CONFIRM The AV control unit needs to be replaced on an APPLIED VEHICLE. ACTION IMPORTANT: The AV control unit for the Applied Vehicle is new, different from the previous model year, and requires a new procedure when replacing. If the following steps are not followed completely, all features will not work as intended. 1. Read and save the VIN 2. Read and save the configuration 3. Replace the AV control unit 4. Reprogram the AV control unit 5. Configure the AV control unit 6. Write the VIN to the AV control unit IMPORTANT: Procedures 4-6 above must be performed in the order shown below.
PC741 2020 Titan2020-06-10. Service bulletin. EQUIPMENT:ELECTRICAL. Audio Visual (AV) Control Unit Screen *****Dealer Announcement***** Nissan is committed to a high level of customer service and satisfaction. This commitment requires Nissan to periodically place certain vehicles on temporary Quality Assurance (QA) Hold to ensure that these vehicles, as delivered to our customers, meet our exacting standards and our customers’ expectations. Effective immediately, Nissan is placing a temporary Quality Assurance (QA) Hold on 1,389 specific MY2020 Titan vehicles. Due to a supplier issue that has since been resolved, the audio/IT screen on the head unit of the subject vehicles may delaminate. *****What Dealers Should Do***** 1. Verify if vehicles are affected by this quality hold using Service Comm or DBS National Service History – Open Campaign I.D. PC741 • New vehicles in dealer inventory can also be identified by using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). • Refer to NPSB 15-460 for additional information • Some vehicles may still be in transit. Please continue to check newly arriving inventory for QA Hold applicability. 2. Please do not drive, sell, loan or trade the specific MY2020 Titan vehicles in dealer inventory subject to this QA Hold. 3. No further action is necessary at this time. Nissan will provide an updated status by no later than the first week of June 2020.
NTB20-0382020-06-10. Service bulletin. POWER TRAIN. 2020 TITAN; DTC P288B STORED IN THE TCM IF YOU CONFIRM DTC P288B (PARK LOCK SOLENOID) is stored in the TCM. NOTE: The customer may have stated: • The following warnings turned ON in the vehicle information display and speedometer (see Figure 1). And • Two attempts were required to shift out of Park. ACTION 1. Confirm the current transmission control module (TCM) part number. 2. Reprogram the TCM, if applicable. NOTE: If DTC P288B stores again, after successful reprogramming, refer to ASIST and the ESM for further diagnosis/repairs.
NTB20-0292020-05-05. Service bulletin. EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM). 2020 TITAN AND TITAN XD; TELEMATICS (IVC) SERVICE INFORMATION SERVICE INFORMATION The vehicles listed under APPLIED VEHICLES that come equipped with a factory installed navigation system also come equipped with a wireless communication device called a Telematics Communication Unit (TCU). With an active NissanConnect Services™ subscription, the TCU communicates with the Nissan Data Center to provide various security and convenience services. This bulletin contains important service procedures that must be performed properly in order to set up and maintain the telematics/in-vehicle communications (IVC) system for the vehicles listed under APPLIED VEHICLES. • - A table has been provided on the next page that lists the steps required to successfully configure a TCU after it has been replaced. • - A check-off sheet has been provided in this bulletin to print and check off steps as they are completed. Staple the completed check-off sheet to the repair order.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.