WenmarOpen by Wenmar Pro

Service bulletins for the 2017 Nissan Titan

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

249 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
NTB15-049o2018-03-26. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. TELEMATICS SERVICE INFORMATION This bulletin applies only to vehicles equipped with a Telematics Communication Unit (TCU). This bulletin has been amended. Changes have been made throughout. It is necessary to read the revised procedure(s) in entirety to properly perform the action(s). Please discard previous versions of this bulletin.
NTB17-060a2018-02-12. Service bulletin. ELECTRICAL SYSTEM. 2016-2017 TITAN XD; DTC P207F AND DEF SYSTEM ERROR IS DISPLAYED ON THE VEHICLE INFORMATION DISPLAY This bulletin applies to vehicles equipped with a Cummins 5.0L V8 Diesel engine. This bulletin has been amended. The Title and all sections on page 1 have been updated. Table A has also been updated. Please discard previous versions of this bulletin.
NTB15-049n2018-02-12. Service bulletin. EQUIPMENT. TELEMATICS SERVICE INFORMATION This bulletin applies to vehicles equipped with a TCU (Telematics Communication Unit). This bulletin has been amended. A correction was made to the Service Procedure on page 23. No other changes were made. Please discard previous versions of this bulletin.
NTB17-1182018-01-29. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. NISSAN; INTELLIGENT KEY IDENTIFICATION AND REGISTRATION TIPS This bulletin applies to vehicles equipped with Intelligent Key only. SERVICE INFORMATION When replacing or adding an Intelligent Key, it is very important to make sure the correct Intelligent Key is selected from the parts department. - A running change was made that will help identify the correct Intelligent Key. - Beginning in late 2017 and early 2018 the last five digits of the Intelligent Key part number is marked on the Intelligent Key under the mechanical key. - See page 2 for location images of this part number addition. NOTE: - A correct Intelligent Key may or may not have the last five digits of the part number as shown on page 2. - The above running change was applied as a ?help? to identify the correct Intelligent Key for a given vehicle, but the actual part number listed in the parts catalog did not change. - Make sure to use the electronic parts catalog (FAST) or equivalent to confirm the correct Intelligent Key for a given vehicle.
NTB17-1162018-01-29. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. 2016-2017 TITAN AND TITAN XD; EXCESSIVE VENT TEMPERATURE DIFFERENCE IN DUAL CLIMATE CONTROL MODE WITH THE SAME TEMPERATURE SETTING This bulletin applies to vehicles with dual climate control air conditioning. IF YOU CONFIRM With the HVAC system of an applied vehicle set in dual climate control mode and both driver and passenger sides are set at the same temperature: A. Temperature set for cool air: The outlet temperature of the driver side vents are warmer by 10°F or more than the passenger side vent temperatures OR B. Temperature set for warm air: The outlet temperature of the passenger side vents are cooler by 10°F or more than the driver side vent temperatures. ACTION 1. If A above is occurring: Replace only the driver side air mix door motor (see Parts Information). - Refer to the Electronic Service Manual (ESM), section HAC-Heater & Air Conditioning Control System, for driver air mix door motor removal and installation. 2. If B above is occurring: Replace only the passenger side air mix door motor (see Parts Information). - Refer to the Electronic Service Manual (ESM), section HAC-Heater & Air Conditioning Control System, for passenger air mix door motor removal and installation.
PC604 2016-172018-01-29. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Transmission Control Module Reprogram ***** Quality Action Summary ***** Nissan is conducting a dealer inventory quality action to reprogram and, if necessary calibrate, the Transmission Control Module (TCM) on specific MY2016-17 Titan XD (A61) vehicles identified in SERVICE COMM and National Service History ? Open Campaigns. These vehicles are either currently in dealer inventory or assigned and in transit to the dealer. The software update will prevent one or more of the following concerns: - Transmission shift shock when accelerating enough to create a 7 3 downshift - Engine RPM fluctuation while driving at a steady speed - Lack of power under light acceleration at low speeds (may be described as hesitation; feeling like the transmission is in too high of a gear) ***** What Dealers Should Do ***** 1. Verify if vehicles currently in dealer inventory are affected by using Service Comm or National Service History ? Open Campaign I.D. PC604. - New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). - Refer to NPSB 15-460 for additional information - Please continue to check newly arriving inventory for campaign applicability. 2. Use the attached procedure to reprogram the TCM and, if applicable, the ECM. - If reprogramming issues arise, use CONSULT III Software version 73.10 - Use the following claims information for vehicles identified in Service Comm or DBS National Service History ? Open Campaigns ID PC604 3. Dealers are requested to remedy any affected vehicle in dealer new inventory to ensure customer satisfaction. Thank you for your prompt attention to this matter. NISSAN NORTH AMERICA, INC. Aftersales DIVISION
NTB17-1272018-01-29. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. NISSAN; INTELLIGENT KEY INITIALIZATION PROCEDURE STOPS OR WILL NOT CONTINUE SERVICE INFORMATION When the initialization procedure being performed with a new or existing Intelligent Key to an applied vehicle is interrupted (the procedure stops or will not continue), the BCM may be left in learn mode and will not function until it returns to normal mode. Under this condition, the BCM and Intelligent Key(s) will not function normally. If this condition occurs, the BCM must be returned to normal mode and the initialization procedure started over. To get back to the beginning of the Initialization procedure, use one of the following procedures: - Successfully perform the initialization procedure using one of the original Intelligent Keys twice consecutively. - Each successful initialization will follow with two (2) quick tones. OR - When the initialization procedure cannot be successfully performed twice (more than two quick tones), perform the initialization procedure five (5) times using the inoperative ?failed? Intelligent Key. - Initialization does not need to be successful when performed five times. When returning to normal operating mode, the initialization procedure for all Intelligent Keys may be started again.
NTB17-1222018-01-29. Service bulletin. FUEL SYSTEM, DIESEL; ENGINE AND ENGINE COOLING. 2016 ? 2017 TITAN XD DIESEL; BLOCK HEATER INOPERATIVE This bulletin applies to vehicles equipped with a Cummins (5.0L V8) Diesel engine only. IF YOU CONFIRM The coolant heater (block heater) needs to be replaced based on the Electronic Service Manual (ESM) inspection, and The vehicle is currently equipped with a coolant heater (with attached cord) located in the front engine cover. NOTE: - This bulletin does not apply if the vehicle is equipped with a coolant heater located in the water inlet at the lower radiator hose. - Refer to the ESM, section CO ? Engine Cooling System, for coolant heater operation and inspection information. ACTION 1. Use the Service Procedure in this bulletin to install a new coolant heater, locating it in the water inlet at the lower radiator hose. 2. Cut the cord to the original coolant heater.
NTB17-016e2017-12-22. Service bulletin. ENGINE AND ENGINE COOLING. ARMADA, TITAN AND TITAN XD; SHIFT SHOCK, LACK OF POWER, AND/OR RPM FLUCTUATES This bulletin applies to vehicles with a gasoline V8 engine only. This bulletin has been amended to add Armada to the Applied Vehicles. No other changes have been made. Please discard previous versions of this bulletin.
NTB17-016d2017-12-22. Service bulletin. ENGINE AND ENGINE COOLING. 2016 - 2017 TITAN AND TITAN XD; SHIFT SHOCK, LACK OF POWER, AND/OR RPM FLUCTUATES This bulletin applies to vehicles with a gasoline V8 engine only. This bulletin has been changed throughout. You must read the entire bulletin to properly perform this repair. Please discard previous versions of this bulletin.
PC594 2016-172017-12-22. Service bulletin. FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY. Fuel Tank Breather Tube Dealer Inventory ***** Detailed Information ***** Nissan is conducting a dealer inventory quality action to inspect the routing of the fuel tank breather tube on approximately 4,288 specific MY2016-17 Titan XD (A61D) vehicles. During vehicle assembly, certain plant operator technicians may not have removed the temporary fuel tank breather tube cap, and may not have correctly affixed the tube to the bed rail. No parts are required for this inspection. ***** What Dealers Should Do ***** 1. Verify if vehicles currently in new dealer inventory are affected by this quality action using Service Comm or DBS National Service History - Open Campaign I.D. PC594 - New vehicles in dealer inventory can also be identified using DCS (Sales-> Vehicle Inventory, and filter by Open Campaign). i. Refer to NPSB 15-460 for additional information - Please continue to check newly arriving inventory for campaign applicability. 2. Use the attached procedure to inspect the vehicle. - If the fuel tank breather tube is routed correctly, file a claim for the inspection. - If the fuel tank breather tube is not routed correctly, provide the requested information in an email to nnafqasupport@nissan-usa.com and await further instruction. Instructions and claims information will be provided within 48 hours. 3. Dealers are requested to inspect any affected vehicle in dealer new or pre-owned inventory to ensure customer satisfaction.
NTB17-031a2017-12-22. Service bulletin. ENGINE AND ENGINE COOLING. 2016 - 2017 TITAN XD; COOLANT HEATER (ENGINE BLOCK HEATER) INSTALLATION This bulletin applies to vehicles with a Cummins (5.0L V8) Diesel engine only. This bulletin has been amended. Substantial changes have been made throughout the body of the bulletin. Please discard all previous versions of this bulletin.
NTB15-049m2017-12-22. Service bulletin. EQUIPMENT:ELECTRICAL. TELEMATICS SERVICE INFORMATION This bulletin applies to vehicles that are equipped with a wireless communication device called a Telematics Communication Unit (TCU). This bulletin has been amended. Changes have been made throughout. You must read the entire bulletin to understand all the changed information. Please discard previous versions of this bulletin.
NTB17-1092017-11-14. Service bulletin. SEATS:FRONT ASSEMBLY:SEAT HEATER/COOLER. 2016 - 2017 TITAN AND TITAN XD; CLIMATE CONTROLLED HEATED AND COOLED SEATS POOR OR NO OPERATION This bulletin applies to Titan and Titan XD vehicles equipped with climate controlled seats. IF YOU CONFIRM The Climate Controlled (Heated and Cooled) seats do not heat or cool well, or do not work at all. NOTE: This issue, if it should occur, may occur on only the driver seat, or only the front passenger seat, or both front seats. ACTION Refer to the Repair Overview flow chart on page 2.
NTB16-036b2017-11-14. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. 2016-2017 TITAN XD; COLD WEATHER STARTING TIPS This bulletin has been amended. The Applied Vehicles section has been revised. No other changed have been made. Please discard previous versions of this bulletin.
PC5072017-10-25. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. Transmission Control Module Reprogram ***** Detailed Information ***** Nissan is conducting a dealer inventory service action to reprogram and, if necessary calibrate, the Transmission Control Module (TCM) on specific MY2016-17 Titan XD (A61D) vehicles identified in SERVICE COMM. These vehicles are either currently in dealer inventory or assigned and in transit to the dealer. No parts are required for this action. ***** What Dealers Should Do ***** 1. Verify if vehicles currently in dealer inventory are affected by this inventory service action using Service Comm I.D. PC507. 2. Use the attached procedure to reprogram and, if necessary, calibrate the TCM. Note: Dealers should continue to check new arriving inventory for applicability. 3. Dealers are requested to remedy any affected vehicle in dealer new or pre-owned inventory to ensure customer satisfaction.
NTB16-068b2017-10-25. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. 2016-2017 TITAN XD; TRANSMISSION SHIFT QUALITY ISSUES This bulletin has been amended. Changes have been made throughout. Please discard previous versions of this bulletin.
NTB16-045a2017-10-25. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY. 2016-2017 TITAN XD; 7 A/T DTCs STORED This bulletin has been amended to update Applied Vehicles. Please discard previous versions of this bulletin.
NTB16-038a2017-10-25. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. 2016-2017 TITAN XD; 6AT TRANSMISSION CALIBRATION This bulletin has been amended. Steps 13, 16, 17, 19, 22 and 23 have been revised, the APPLIED VEHICLES section has been updated, and page 10 has been created for distribution to the customer. No other changes have been made. Please discard previous versions of this bulletin.
NTB15-049i2017-10-25. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY. TELEMATICS SERVICE INFORMATION ONLY SPECIFIC TRIM PACKAGES ARE AFFECTED This bulletin has been amended. Information for 2017 Altima, Murano, Pathfinder, Sentra, and Titan/Titan XD vehicles has been applied. No other changes have been made. Please discard previous versions of this bulletin.
PC5772017-10-25. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY. Bed Welds Voluntary Service Campaign ***** Campaign Summary ***** Nissan is conducting a voluntary service campaign on certain 2017 Titan vehicles to repair the right and left hand bed side rails. Due to a manufacturing issue that has since been corrected, the welds between the mating materials on the side rails of the Titan truck bed may not meet Nissan design specifications. In extreme conditions, deformation to the bed could occur. ***** What Dealers Should Do ***** 1. Verify if vehicles are affected by this Voluntary Service Campaign using Service Comm I.D. PC577 - New vehicles in dealer inventory can be also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). o Refer to NPSB 15-460 for additional information 2. Dealers are requested to repair any affected vehicles in dealer new or pre-owned inventory to ensure customer satisfaction. 3. Dealers should use the following campaign repair bulletin to remedy any vehicles subject to this campaign: NTB17-075 4. Once repaired, dealers should submit the claim, using the claims coding provided, and release the vehicle.
NTB17-0862017-10-25. Service bulletin. ELECTRICAL SYSTEM. 2016 ? 2017 TITAN AND TITAN XD IGNITION WILL NOT TURN OFF This bulletin applies to vehicles not equipped with remote start. IF YOU CONFIRM While driving, the ?Key System Error? warning displays, and When parking the vehicle and pushing the Start/Stop switch, the ignition/engine does not turn OFF, and The connector cap for the hood switch harness connector (connector E94) is missing or damaged. NOTE: Refer to Figures A and B on the next page for examples of missing and damaged connector cap. ACTION Replace the hood switch harness connector (connector E94) with the new one (Service Kit) listed in the Parts Information.
NTB17-0822017-10-25. Service bulletin. EQUIPMENT:RECREATIONAL VEHICLE/TRAILER:LPG SYSTEMS:TANK VALVE/GAUGE. NISSAN; DTC P0456 CAUSED BY EVAP LEAK AT VENT CONTROL VALVE O-RING IF YOU CONFIRM The MIL is ON in an APPLIED VEHICLE with DTC P0456 (EVAP VERY SML LEAK) AND - DTC P0456 is not caused by a loose fuel fill cap (refer to NTB13-097). - An EVAP leak has been detected where the vent control valve mounts to the canister. - The vent control valve O-ring seal is determined to be the cause. ACTION 1. DO NOT REPLACE the vent control valve. 2. Replace the vent control valve O-ring seal (O-ring). - Refer to SERVICE PROCEDURE on page 2.
PC5612017-10-25. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. Automatic Transmission Dealer Inventory This bulletin applies to 2WD vehicles, it does not apply to Titan XD. *****Dealer Announcement***** Nissan is conducting a dealer inventory quality action to perform several inspections on 6,705 specific 2017 Titan (non-XD) Gasoline 2-wheel drive vehicles identified in Service Comm. Dealer will perform the following: - A/T Fluid Leak Inspection - Steering Gear Leak Inspection Affected vehicles are not subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. Nissan requests dealers to complete this inspection prior to sale to help ensure customer satisfaction. *****What Dealers Should Do***** 1. Verify if vehicles currently in new dealer inventory are affected by this service action using Service Comm I.D. PC561 - New vehicles in dealer inventory can also be identified using DCS (Sales-> Vehicle Inventory, and filter by Open Campaign). - Refer to NPSB 15-460 for additional information - Please continue to check newly arriving inventory for campaign applicability. 2. Use the attached procedure to inspect the vehicle and, if necessary, repair. 3. The service department should submit the applicable warranty claim for the action(s) performed so it can be closed on Service Comm and release the vehicle.
NTB16-1162017-10-15. Service bulletin. ENGINE. NISSAN; DIAGNOSIS INFORMATION FOR ABS DTC C1130 SERVICE INFORMATION When diagnosing for DTC C1130 (ENGINE SIGNAL): ECM related DTCs (P-codes) must be diagnosed, repaired, and DTCs erased first. - DTC C1130 is an ABS DTC that indicates an output signal of the ECM is not recognized. - Absent or incorrect ECM signals, that are indicated by corresponding P-codes, may trigger C1130 in the ABS control unit. - Some vehicle features that can be affected by absent or incorrect ECM signals are: - Forward Emergency Braking (FEB) - Intelligent Cruise Control (ICC) - VDC/ABS/TCS

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.