WenmarOpen by Wenmar Pro

Service bulletins for the 2021 Nissan Rogue

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

234 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Transmission and driveline are shown. Show all

Bulletins, newest first
NTB21-0232021-05-08. Service bulletin. POWER TRAIN. 2021 ROGUE; DTC P0780 STORED IN THE TCM IF YOU CONFIRM DTC P0780 (SHIFT ERROR) is stored in the TCM. This DTC may be in PAST or CURRENT status. ACTION 1. Confirm the current TCM part number. 2. Reprogram the TCM, if applicable. 3. Perform the ESM DTC Confirmation Procedure.
NTB21-0322021-05-08. Service bulletin. POWER TRAIN; PARKING BRAKE. 2021 ROGUE; WARNING LIGHTS FLASHING ON THE INSTRUMENT PANEL WITH DTC P18A5 STORED IF YOU CONFIRM The Electric Shift Control System and the Electronic Parking Brake System warning lights are ON, with DTC P18A5 (AUTO PARK FUNCTION CANCEL) stored. Electric Shift Control System warning light Electronic Parking Brake System warning light ACTION 1. Configure the TCM and ABS control unit (see Service Procedure on page 2). 2. Clear DTCs.
NTB21-0132021-03-06. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; POWER TRAIN. PREVENT FRONT AXLE THREAD DAMAGE DURING NUT REMOVAL SERVICE INFORMATION If an Applied Vehicle needs to have a front axle nut removed, for any reason, the staking of the nut into the axle keyway must first be removed. The essential tool (part number # J-52982, Figure 1) required to remove the nut staking, is called out as a “Cape Chisel” in the Electronic Service Manual (ESM), and must be used to prevent thread damage to the axle (see Figure 2 on page 2). • The Cape Chisel arrived at dealers in December of 2020. • Damaged threads, due to improper removal of the stake placed in the nut, will not be covered by warranty. For information on using the Cape Chisel, refer to the Electronic Service Manual (ESM): Section TRANSMISSION & DRIVELINE > FRONT AXLE > REMOVAL AND INSTALLATION > FRONT DRIVE SHAFT > LH/RH.
REVISION 1 - P0A2021-02-06. Service bulletin. POWER TRAIN. Final All Wheel Drive Clutch Break-In Update January 22, 2021 Please discard earlier versions of this bulletin. The announcement from November 24, 2020 has been revised to include: - Additional affected vehicles have been identified, thus the dealer inventory population has increased. Affected vehicles are either currently in dealer inventory or assigned and in transit to the dealer. Please continue to check newly arriving inventory for campaign applicability. Remaining affected inventory should arrive at dealers by the first week of February.
P0A33 2021 Rogue2020-12-09. Service bulletin. POWER TRAIN; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. Final All Wheel Drive Clutch Break-In Dealer Announcement: Nissan is conducting a dealer inventory quality action to complete the final all-wheel drive (AWD) clutch break-in process on 5,789 2021 Nissan Rogue vehicles identified in Service Comm. Due to a design issue, that has since been corrected, Nissan has determined that the break-in process was not properly completed on the subject vehicles. As a result, customers may experience a vibration felt through the floorboard while making a ninety (90) degree turn. Affected vehicles are subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. What Dealers Should Do: PLEASE FOLLOW THE ATTACHED REPAIR INSTRUCTIONS: 1.Verify if vehicles are affected by this quality action using Service Comm or DBS National Service History – Open Campaign I.D. P0A33 •New vehicles in dealer inventory can also be identified by using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). •Refer to NPSB 15-460 for additional information •Some vehicles may still be in transit. Please continue to check newly arriving inventory for applicability. 2.Please do not drive, sell, loan, or trade the specific vehicles in Dealer Inventory subject to this Quality Action. 3.Use the attached procedure to complete the final all-wheel drive clutch break-in process prior to retail delivery of the vehicle. 4.Once remedied, dealers may submit the applicable warranty claim for the action performed and release the vehicle. Dealer Responsibility: It is the dealer’s responsibility to check Service Comm or DBS National Service History – Open Campaign using the appropriate campaign I.D for the inspection status on each affected vehicle currently in new vehicle inventory. Thank you for your prompt attention to this matter.
NTB20-0812020-12-09. Service bulletin. ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM; POWER TRAIN. 2021 ROGUE; VIBRATION FROM REAR WHILE TURNING AT LOW SPEED IF YOU CONFIRM The customer experiences a vibration or a stick/slip/binding feeling from the rear of the vehicle when turning at low speed. ACTION Perform the AWD coupler clutch break-in procedure.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.