WenmarOpen by Wenmar Pro

Service bulletins for the 2021 Nissan Rogue

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

234 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Equipment and accessories are shown. Show all

Bulletins, newest first
NTB21-037A2021-09-09. Service bulletin. ELECTRICAL SYSTEM; COMMUNICATION:MANUFACTURER TELEMATICS; EQUIPMENT. DTCS B2E4B-06, B2E60-06, B2E61-06 STORED IN THE TCU This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB21-005A2021-09-09. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; ENGINE AND ENGINE COOLING. REMOTE ENGINE START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin.
NTB21-0692021-08-06. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. 2021 ROGUE; ELECTRONIC SHIFTER ASSEMBLY SERVICE INFORMATION If the customer has a concern of a MIL, and a DTC(s) is stored in any module, AND The ESM diagnosis of the DTC(s) leads to replacement of the electronic shifter assembly, AND It is determined that the failure of the electronic shifter assembly is caused by an electrical or mechanical failure. Submit a factory warranty claim for replacement of the electronic shifter assembly. Do NOT charge the customer for replacement of the electronic shifter assembly.
NTB21-0632021-08-06. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM; ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER:SENSOR/SENDING UNIT. COMBINATION METERS CANNOT BE SWAPPED SERVICE INFORMATION Do not swap combination meter modules between vehicles for any reason in the APPLIED VEHICLES. Due to a new electrical architecture, the vehicle mileage is now stored in multiple control modules. When a mileage difference is detected between modules, the module with the lower value will be immediately overwritten, replacing it with the higher mileage. If a new combination meter module is installed, it will automatically be overwritten to the correct vehicle mileage.
NTB20-095A2021-08-06. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM); POWER TRAIN; EQUIPMENT. 2021 ROGUE; AWD COUPLER SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB21-0342021-05-08. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. 2019-2021 ALTIMA AND 2021 ROGUE; AC INOPERATIVE WITH DTC B20C8-14 STORED IF YOU CONFIRM The AC compressor is not engaging when the AC is in the ON position as indicated by the yellow illumination on the AC button, And DTC B20C8-14 ECV (ELECTRICAL CONTROL VALVE) is stored in the IPDM. SERVICE PROCEDURE 1. Clear the DTC, and follow the DTC CONFIRMATION PROCEDURE in the ESM. • If DTC B20C8-14 is past, AC compressor operation is inhibited until the DTC is cleared. • If DTC B20C8-14 returns after being cleared (either Current or Past status), follow the ESM diagnosis procedure. • For models with Automatic Air Conditioning, go to section: VENTILATION, HEATER & AIR CONDITIONER > HEATER & AIR CONDITIONING CONTROL SYSTEM > AUTOMATIC AIR CONDITIONING > DTC/CIRCUIT DIAGNOSIS > B20C8-14 ECV (ELECTRICAL CONTROL VALVE). • For models with Manual Air Conditioning, go to section: VENTILATION, HEATER & AIR CONDITIONER > HEATER & AIR CONDITIONING CONTROL SYSTEM > MANUAL AIR CONDITIONING > DTC/CIRCUIT DIAGNOSIS > B20C8-14 ECV (ELECTRICAL CONTROL VALVE).
NTB20-029D2021-05-08. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. TELEMATICS (IVC) SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin.
NTB21-0132021-03-06. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; POWER TRAIN. PREVENT FRONT AXLE THREAD DAMAGE DURING NUT REMOVAL SERVICE INFORMATION If an Applied Vehicle needs to have a front axle nut removed, for any reason, the staking of the nut into the axle keyway must first be removed. The essential tool (part number # J-52982, Figure 1) required to remove the nut staking, is called out as a “Cape Chisel” in the Electronic Service Manual (ESM), and must be used to prevent thread damage to the axle (see Figure 2 on page 2). • The Cape Chisel arrived at dealers in December of 2020. • Damaged threads, due to improper removal of the stake placed in the nut, will not be covered by warranty. For information on using the Cape Chisel, refer to the Electronic Service Manual (ESM): Section TRANSMISSION & DRIVELINE > FRONT AXLE > REMOVAL AND INSTALLATION > FRONT DRIVE SHAFT > LH/RH.
PC791 2021 Rogue2021-03-06. Service bulletin. FUEL SYSTEM, GASOLINE; EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY. Fuel Pump Inspection Dealer Inventory *****Dealer Announcement***** Nissan is issuing a quality hold and conducting a dealer inventory quality action to inspect the fuel pump installation on 1,002 specific model year 2021 Rogue vehicles identified in Service Comm. Due to a manufacturing concern that has since been resolved, the fuel pump lock ring installation may not be complete, the fuel pump lock ring engagement may not be fully engaged, and/or the fuel feed tube locking clip at the low pressure fuel pump may not be fully installed on the applicable vehicles. Dealers should follow the procedure to remedy any of these conditions, if identified during the inspection. Affected vehicles are subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. Dealers must complete the inspection and if necessary, repair, prior to sale. *****What Dealers Should Do***** PLEASE FOLLOW THE ATTACHED INSPECTION INSTRUCTIONS: 1. Verify if vehicles are affected by this quality action using Service Comm or DBS National Service History – Open Campaigns I.D. PC791 • New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). • Refer to NPSB 15-460 for additional information • Please continue to check newly arriving inventory for campaign applicability. 2. Please do not drive, loan, sell or trade the specific vehicles in dealer inventory subject to this quality action. 3. Use the attached procedure to inspect and, if necessary, remedy any vehicles affected by this quality action. 4. The service department should submit the applicable warranty claim for the action performed so it can be closed on Service Comm and release the vehicle.
NTB20-029c2021-03-06. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; ELECTRICAL SYSTEM. 2021 MAXIMA AND ROGUE, 2020-2021 TITAN AND TITAN XD; TELEMATICS (IVC) SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin.
PC779 2021 Rogue2021-02-06. Service bulletin. EQUIPMENT. Shift Lever Hang Tag Dealer Inventory *****Dealer Announcement***** Nissan is conducting a dealer inventory quality action to place a Hang Tag on the shift lever on 16,253 specific 2021 Rogue vehicles identified in Service Comm. This tag puts instructions on the operation of the newly designed electronic shifter conspicuously right at the driver’s hand. Further detailed instructions are available in the Quick Reference Guide and Owner’s Manual. Vehicles manufactured after mid-December will have the hang tag in place. Affected vehicles are not subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. *****What Dealers Should Do***** PLEASE FOLLOW THE ATTACHED INSPECTION INSTRUCTIONS: 1. Verify if vehicles are affected by this quality action using Service Comm or DBS National Service History – Open Campaigns I.D. PC779 • New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). • Refer to NPSB 15-460 for additional information • Please continue to check newly arriving inventory for campaign applicability. 2. Use the attached procedure to remedy vehicles affected by this quality action. • Dealers will receive one (1) hang tag for every affected vehicle in dealer inventory via FedEx. Tags will be sent to the Service Manager’s attention. • Hang tags will begin mailing January 22, 2021 and should arrive no later than January 29, 2021. • If replacement tags are needed, please send your request to: • CampaignAnnouncements@nissan-usa.com along with your dealer name, address, VIN, contact name and phone number. 3. The service department should submit the applicable warranty claim for the action performed so it can be closed on Service Comm.
NTB20-0952021-01-09. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE; ELECTRICAL SYSTEM. 2021 ROGUE; AWD COUPLER SERVICE INFORMATION SERVICE INFORMATION The AWD coupler on the APPLIED VEHICLE listed above, is available as a separate service part. When replacement of the AWD coupler is required, DO NOT follow the ESM procedure. Instead, follow the procedure outlined in this service bulletin.
NTB20-052a2020-12-09. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. REAR DOOR ALERT SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
P0A33 2021 Rogue2020-12-09. Service bulletin. POWER TRAIN; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. Final All Wheel Drive Clutch Break-In Dealer Announcement: Nissan is conducting a dealer inventory quality action to complete the final all-wheel drive (AWD) clutch break-in process on 5,789 2021 Nissan Rogue vehicles identified in Service Comm. Due to a design issue, that has since been corrected, Nissan has determined that the break-in process was not properly completed on the subject vehicles. As a result, customers may experience a vibration felt through the floorboard while making a ninety (90) degree turn. Affected vehicles are subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. What Dealers Should Do: PLEASE FOLLOW THE ATTACHED REPAIR INSTRUCTIONS: 1.Verify if vehicles are affected by this quality action using Service Comm or DBS National Service History – Open Campaign I.D. P0A33 •New vehicles in dealer inventory can also be identified by using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). •Refer to NPSB 15-460 for additional information •Some vehicles may still be in transit. Please continue to check newly arriving inventory for applicability. 2.Please do not drive, sell, loan, or trade the specific vehicles in Dealer Inventory subject to this Quality Action. 3.Use the attached procedure to complete the final all-wheel drive clutch break-in process prior to retail delivery of the vehicle. 4.Once remedied, dealers may submit the applicable warranty claim for the action performed and release the vehicle. Dealer Responsibility: It is the dealer’s responsibility to check Service Comm or DBS National Service History – Open Campaign using the appropriate campaign I.D for the inspection status on each affected vehicle currently in new vehicle inventory. Thank you for your prompt attention to this matter.
NTB20-0842020-12-09. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM); ELECTRICAL SYSTEM; EQUIPMENT. INTELLIGENT KEY UNIT DTC P161D STORED IN THE ECM SERVICE INFORMATION DTC P161D (IMMOBILIZER) will not cause: • The MIL to turn ON. • The Remote Engine Start to become inoperative. • The “No Key Detected” message to appear. • An impact to any of the vehicle’s functions or performance. If other DTCs are stored with P161D, perform the diagnosis and repair procedures, outlined in the ESM, for the other DTCs first. • After the other DTCs have been resolved and P161D does not clear, proceed with the diagnosis and repair, outlined in the ESM, for DTC P161D.
NTB20-0792020-12-09. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. 2021 ROGUE; AV CONTROL UNIT REPLACEMENT PROCESS IF YOU CONFIRM The AV control unit needs to be replaced on an APPLIED VEHICLE. ACTION IMPORTANT: The AV control unit for the applied vehicle is new, different from the previous model year, and requires a new procedure when replacing. If the following procedures are not followed completely, all features will not work as intended. 1. Replace the AV control unit 2. Reprogram the AV control unit 3. Configure the AV control unit 4. Write the VIN to the AV control unit (Manual Input) IMPORTANT: Procedures 2-4 above must be performed in the order shown below.
NTB20-0732020-11-09. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY. 2021 ROGUE AND 2020 SENTRA; INTELLIGENT KEY UNIT SERVICE INFORMATION SERVICE INFORMATION • When replacing the intelligent key unit (hands free module), ALWAYS replace it with a new one. • Module configuration MUST BE performed before NATS initialization (key registration). Once NATS initialization has been performed, portions of the configuration are locked and can no longer be changed. • When replacing the intelligent key unit, it is critical to follow the work procedure as detailed in the ESM. • For Rogue, go to BODY EXTERIOR, DOORS, ROOF & VEHICLE SECURITY >DOOR & LOCK > BASIC INSPECTION > ADDITIONAL SERVICE WHEN REPLACING INTELLIGENT KEY UNIT. • For Sentra, go to BODY EXTERIOR, DOORS, ROOF & VEHICLE SECURITY >DOOR & LOCK > BASIC INSPECTION > INTELLIGENT KEY UNIT >ADDITIONAL SERVICE WHEN REPLACING INTELLIGENT KEY UNIT.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.