P1726 on the 2013 Nissan Rogue
The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.
This code is specific to a manufacturer and is not described here. Its meaning is in the manufacturer's service information.
| NTB16020 | 2021-05-10. Service bulletin. IF YOU CONFIRM The vehicle is operated as follows: 1. The ambient temperature is below freezing (below 32°F / 0°C). 2. The engine was started and the vehicle driven a short distance. 3. The vehicle was then parked (engine turned OFF), and then allowed to sit for at least 10 minutes. THEN, when restarting the engine: - The engine will crank but not start OR - The engine will start, but the engine will not respond to throttle pedal input. AND - One or more of the following Electronic Throttle Control (ETC) related DTCs are found stored in the ECM: -P2100 (ETC MOT PWR-B1) -P2101 (ETC FNCTN/CIRC-B1) -P1726 (ELEC TH CONTROL) ACTION Replace the Intelligent Power Distribution Module (IPDM) with the one listed in the PARTS INFORMATION section of this bulletin. - Refer to the Electronic Service Manual (ESM), section PCS-Power Control System, for IPDM removal and installation. See this bulletin for further detail. |
|---|
1 on file from NHTSA, as of 2026-10-19. See them in the bulletin list. A bulletin lists model years: read the document for which vehicles it concerns.