WenmarOpen by Wenmar Pro

Service bulletins for the 2015 Nissan NV200

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

154 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Exhaust and emissions are shown. Show all

Bulletins, newest first
NTB16-0442021-05-24. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM). Voluntary Emission service campaign 2015 Taxi ECM reprogram.
NTB151082021-05-10. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV). IF YOU CONFIRM The MIL is ON and DTC P0101 (MAF SEN/CIRCUIT-B1) is stored. ACTION 1. Replace the PCV valve with the new one listed in the Parts Information. 2. If needed, reprogram the ECM. Refer to this bulletin for further detail.
NTB150552021-05-10. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL. SERVICE INFORMATION After ECM reprogramming, the Calibration Verification Number (CVN) needs to be automatically calculated prior to State emissions testing (also known as Inspection Maintainence, I/M, or SMOG testing depending upon location). Allowing the vehicle to idle for 22 minutes will allow for faster CVN calculation. It is recommended that customers utilize this method if the vehicle needs to be tested for emissions soon after ECM reprogramming. See this bulletin for further detail.
NTB16-0442016-06-22. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL. VOLUNTARY EMISSION SERVICE CAMPAIGN 2015 TAXI ECM REPROGRAM INTRODUCTION Nissan is conducting a Voluntary Emission Service Campaign on certain 2015 Taxi vehicles to reprogram the Engine Control Module (ECM) for improper calibration. The improper calibration may result in poor idle quality and/or a P0101 DTC and a Malfunction Indicator Light (MIL) illumination. This service will be performed at no charge for parts or labor.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.