Recalls that may apply to the 1998 Nissan Frontier
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
By component
| 98V065000 | 1998-03-25. SEAT BELTS:FRONT:WEBBING. VEHICLE DESCRIPTION: LIGHT DUTY PASSENGER TRUCKS EQUIPPED WITH BUCKET SEATS. IN CERTAIN FRONTAL CRASHES, THE FRONT SEAT BELT CAN SLIP BETWEEN THE SEAT BOTTOM FINISHER AND THE SEAT BACK PLASTIC RECLINER HANDLE WHERE IT CAN BE CUT BY THE SHARP EDGE OF THE METAL PORTION OF THE RECLINER LEVER. Built 1997-09-10 to 1998-01-27. |
|---|---|
| 98V064000 | 1998-03-25. POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL). VEHICLE DESCRIPTION: LIGHT DUTY PASSENGER TRUCKS EQUIPPED WITH AUTOMATIC TRANSMISSIONS. A SECURING PIN INSIDE THE AUTOMATIC TRANSMISSION CONTROL DEVICE ASSEMBLY CAN COME LOOSE ALLOWING THE SHIFT LEVER TO BE INADVERTENTLY MOVED OUT OF THE PARK POSITION WITH THE KEY IN THE IGNITION. Built 1997-10-23 to 1997-12-16. |
| 1998060 | 1998-03-27. Powertrain. THE REARMOST POSTION PIN WHICH SECURES THE DETENT PLATE TO THE COMPRESSION ROD OF THE AUTOMATIC TRANSMISSION CONTROL DEVICE ASSEMBLY MAY WORK OUT OF ITS HOLE IN THE COMPRESSION ROD. THIS WOULD ALLOW THE DETENT PLATE TO ROTATE WITH RESPECT TO THE COMPRESSION ROD. IF THIS WERE TO OCCUR, THE TRANSMISSION SELECTOR LEVER COULD BE INADVERTENTLY MOVED FROM THE PARK POSTION. CORRECTION: VEHICLES WILL BE INSPECTED AND AUTOMATIC TRANSMISSION CONTROL DEVICE ASSEMBLY WILL BE REPLACED IF REQUIRED. |
|---|---|
| 1998059 | 1998-03-27. Seats And Restraints. IN CERTAIN TYPES OF FRONTAL CRASHES, THE FRONT SEAT BELT MAY SLIP BETWEEN THE SEAT BOTTOM FINISHER AND THE SEAT BACK PLASTIC RECLINER HANDLE WHERE IT MIGHT BE CUT BY THE SHARP EDGE OF THE METAL PORTION OF THE RECLINER LEVER. IF THE SEAT BELT IS COMPLETELY SEVERED, IT COULD INCREASE THE RISK OF INJURY TO AN OCCUPANT IN A CRASH. CORRECTION: THE PLASTIC RECLINER HANDLE AT THE END OF THE SEAT BACK RECLINING LEVER FOR EACH FRONT SEAT WILL BE REPLACED WITH ONE OF A DIFFERENT SHAPE WHICH PREVENTS THE SEAT BELT FROM SLIPPING BETWEEN THE HANDLE AND THE SEAT. |
A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.