WenmarOpen by Wenmar Pro

Service bulletins for the 2017 Nissan Armada

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

110 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Bulletins, newest first
NTB17-0302017-08-01. Service bulletin. FUEL SYSTEM, GASOLINE; FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY. NISSAN; FUEL TANK IS SLOW OR DIFFICULT TO FILL IF YOU CONFIRM The fuel tank is slow or difficult to fill (filling nozzle shuts off before tank is full). IMPORTANT: Make sure this incident has been duplicated at a gas station by dealer service staff. ACTION Perform the Service Procedure in this bulletin, starting on the next page.
NTB17-0262017-08-01. Service bulletin. SUSPENSION:FRONT; EQUIPMENT. BALL JOINT AXIAL END PLAY PROCEDURE SERVICE INFORMATION When working on the front suspension, use the updated service information in this bulletin along with the Electronic Service Manual (ESM). The updated information in this bulletin is a correction and a supplement to the ESM.
NTB17-016a2017-08-01. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. 2017 ARMADA; SHIFT SHOCK WITH DOWN SHIFT This bulletin has been amended. The Applied VIN and Date have been removed. No other changes have been made. Please discard previous versions of this bulletin.
PC522 Titan and2017-08-01. Service bulletin. ENGINE; EQUIPMENT:ELECTRICAL; ELECTRICAL SYSTEM:SOFTWARE. ECM Reprogram Dealer Inventory *****Dealer Announcement***** Nissan is conducting a dealer inventory service action to update Electronic Control Module (ECM) software on 7,719 specific 2017 Titan and 4,759 Armada vehicles identified in Service Comm. On the affected vehicles, the ECM software is being updated to refine the MIL illumination logic for the exhaust gas temperature sensor. Affected vehicles are not subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. Nissan requests dealers to complete this software update prior to sale to ensure customer satisfaction. *****What Dealers Should Do***** PLEASE FOLLOW THE ATTACHED REPAIR INSTRUCTIONS: 1. Verify if vehicles currently in new dealer inventory are affected by this service action using Service Comm I.D. PC522 for Titan or P6334 for Armada. - New vehicles in dealer inventory can also be identified using DCS (Sales-> Vehicle Inventory, and filter by Open Campaign). - Refer to NPSB 15-460 for additional information - Please continue to check newly arriving inventory for campaign applicability. 2. Use the attached procedure to install the updated software. 3. The service department should submit the applicable warranty claim for the action performed so it can be closed on Service Comm and release the vehicle. ***** Dealer Responsibility ***** It is the dealer?s responsibility to check Service Comm using the appropriate campaign I.D for the inspection status on each affected vehicle currently in new vehicle inventory. Nissan requests dealers to perform this repair on new vehicles in inventory prior to being retailed to ensure customer satisfaction.
NTB17-0232017-08-01. Service bulletin. VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR. 2017 ARMADA; OUTSIDE MIRROR(S) LOOSE AT BASE SERVICE INFORMATION If the power foldable outtside mirrors are manually folded/unfolded or bumped, the mirror body can become loose at the pivot point. If this occurs, the mirrors should be adjusted again electrically before driving. To readjust the mirrors, press the "CLOSE" switch (see Figure 1) until the mirrors are fully folded in, then press the ?OPEN? switch until the mirrors are fully open. This mirror readjustment procedure is included in section 3 - Pre-driving checks and adjustments of the vehicle Owner?s Manual. NOTE: - DO NOT replace the power foldable outside mirrors for this condition, should it occur. - This condition is not covered under the Nissan New Vehicle Limited Warranty.
NTB17-0132017-08-01. Service bulletin. EXTERIOR LIGHTING:HEADLIGHTS. 2017 ARMADA; HEADLAMP AIMING SERVICE INFORMATION When adjusting the headlamps on an Applied Vehicle, make sure to follow the procedures in the Electronic Service Manual (ESM). - Warranty claims for headlamp adjustment are subject to audit. - Claims must have the measurements for dimension H and A (shown in this bulletin) listed on the repair order and on the Technician Comments line of the claim. - Claims submitted without these measurements may be denied. If a customer reports their headlamps are not aimed correctly: 1. Make sure the manual headlamp aiming control is set to '0' (see page 2). 2. Follow the exact procedure in the ESM for headlight adjustment. CAUTION: Do not deviate from the adjustment procedure in the ESM. 3. Refer to the Clarifications of the ESM Vertical Headlamp Adjustment Procedures in this bulletin.
NTB17-0082017-08-01. Service bulletin. EQUIPMENT:MECHANICAL; ENGINE. NISSAN; OIL LEAKING AROUND VALVE TIMING CONTROL SOLENOID VALVE This bulletin applies only to Maxima, Quest, Altima Coupe, Altima, Pathfinder and Murano vehicles equipped with V6 engine OR Titan/Titan XD equipped with VK56 engine IF YOU CONFIRM Engine oil is leaking from a valve timing control solenoid valve, And The valve timing control solenoid valve operates correctly and is not externally damaged. ACTION Replace the valve timing control solenoid valve O-ring with a new one using the Service Procedure starting on page 2.
NTB16-1242017-08-01. Service bulletin. ENGINE. 2017 ARMADA AND TITAN/TITAN XD; MIL IS ON WITH DTC P2080 AND/OR P2082 IF YOU CONFIRM: The MIL is ON with DTC - P2080 (EXHAUST GAS TEMP SENSOR 1 B1), And/or - P2082 (EXHAUST GAS TEMP SENSOR 1 B2). ACTION: 1. Refer to step 6 in the SERVICE PROCEDURE to confirm this bulletin applies to the vehicle you are working on. 2. If this bulletin applies, reprogram the ECM. NOTE: If this bulletin does apply (the ECM needs to be reprogrammed), do NOT replace the exhaust gas temp sensor.
NTB16-1232017-08-01. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY. PLASTIC INTERIOR TRIM PROTECTIVE COVERING REMOVAL SERVICE INFORMATION Vehicles are delivered with plastic interior trim protective covering on the front and rear seats, front and rear door panel finishers, steering wheel, and sun visors (see examples on page 2). When removing the protective covering, care must be used to avoid scuffs, scrapes, cuts, and other abrasive contact to interior trim components. DO NOT use sharp objects like razor blades, box cutters, knives, etc. when removing the plastic interior trim protective covering. IMPORTANT All soft trim described in this bulletin is on automatic return to NNA. Any trim found damaged in the way described in this bulletin will be charged back to the dealer.
NTB13-097D2017-02-14. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. "ALL MODEL YEAR 2012 AND NEWER NISSAN VEHICLES; EVAP LEAK DTC P0442, P0455, P0456 INFORMATION THIS BULLETIN HAS BEEN AMENDED. THE TITLE HAS BEEN REVISED, AND THE BULLETIN NOW INCLUDES VEHICLES IN PRODUCTION AS OF THE DATE OF THIS UPDATE. NO OTHER CHANGES HAVE BEEN MADE. PLEASE DISCARD ALL PREVIOUS VERSIONS OF THIS BULLETIN."

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.