WenmarOpen by Wenmar Pro

Service bulletins for the 2013 Nissan Armada

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

113 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Seat belts are shown. Show all

Bulletins, newest first
NTB14089B2021-05-10. Service bulletin. SEAT BELTS; ELECTRICAL SYSTEM; EQUIPMENT; VEHICLE SPEED CONTROL. IF YOU CONFIRM The I-Key door handle request switch intermittently will not lock or unlock the doors. and The vehicle has painted door handles. and Key fob has been function tested and signal strength is correct. ACTION Replace the door handles with the new door handles listed in Table A on page 2. - Refer to the Electronic Service Manual (ESM), section DLK Door & Lock, for information about door handle replacement. NOTE - This bulletin does not apply to vehicles with chrome door handles. See this bulletin for further detail.
NTB150362021-05-10. Service bulletin. AIR BAGS; VEHICLE SPEED CONTROL; ELECTRICAL SYSTEM; SEAT BELTS; EQUIPMENT. SERVICE INFORMATION The applied vehicles are equipped with automatic door locks that lock all doors when the vehicle speed reaches 15 MPH. There is no instruction in the Owner?s Manual on auto-lock function deactivation. All doors unlock automatically when the ignition is placed in the OFF position (models with Intelligent Key system) or when the key is removed from the ignition switch (models without Intelligent Key system). The auto-unlock function can be deactivated by the driver in accordance with Owner?s Manual Instructions. Please see this bulletin for further details.
NTB130672021-05-10. Service bulletin. VISIBILITY; AIR BAGS; SEAT BELTS; VEHICLE SPEED CONTROL. IF YOU CONFIRM The "Comfort" option (comfort & convenience settings) under the Navigation's user configurable settings is missing from the scroll down menu, which includes: > Auto Interior Illumination > Light Sensitivity > Light Off Delay > Speed Sensing Wiper Interval > Selective Door Unlock > Intelligent Key Lock/Unlock > Slide Driver's Seat Back on Exit > Return all Settings to Default 1. Follow the Service Procedure starting on page 2 to load the Re-programming Software DVD referenced in the Parts Information on the next page. 2. Initialize and then manually configure the MULTI AV system with the setting in this bulletin. See this bulletin for further details.
NTB130382021-05-10. Service bulletin. VEHICLE SPEED CONTROL; SEAT BELTS. SERVICE INFORMATION The "Lock / Unlock request buttons" that are located on the outside door handles of vehicles with Intelligent Key can be disabled (or enabled) through either the "Comfort & Conv." settings of the Audio/Visual/Navigation system, orthrough the "Combination Meter settings" depending on the vehicle model, year and trim level. NOTE: In some instances this feature may be unintentionally disabled. Please verify the status of this feature before any further diagnostic is performed. Please see this bulletin for further details.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.