WenmarOpen by Wenmar Pro

Service bulletins for the 2010 Nissan Armada

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

102 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Labels and manuals are shown. Show all

Bulletins, newest first
NTB12-048A2021-12-03. Service bulletin. POWER TRAIN; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. VOLUNTARY SERVICE CAMPAIGN 2010 – 2012 ARMADA; REAR AXLE CLICK Service Campaign ID # PC142 is no longer active. • Repair orders opened after this bulletin’s published date are no longer eligible for reimbursement under Campaign ID # PC142. • Discard all previous versions of NTB12-048.
NTB11-040B2021-08-06. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ELECTRICAL SYSTEM; EQUIPMENT. VOLUNTARY SERVICE CAMPAIGN 2009-2011 TITAN AND 2010-2011 ARMADA; FRONT A/C ACTUATOR MOTOR Service Campaign ID # PC090 is no longer active. • Repair orders opened after this bulletin’s published date are no longer eligible for reimbursement under Campaign ID # PC090. • Discard all previous versions of NTB11-040.
NTB09131B2021-05-10. Service bulletin. FORWARD COLLISION AVOIDANCE; EQUIPMENT:OTHER:LABELS. SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement "Certification Label" or "VIN Plate / Label" may be needed. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. See this bulletin for further detail.
NTB-10-0522010-04-21. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; SUSPENSION:FRONT:WHEEL BEARING; EQUIPMENT:ELECTRICAL. NISSAN: THE PROPELLER SHAFT U JOINT (JOURNAL/JOURNAL BEARINGS) IS THE SOURCE OF NOISE AND/OR VIBRATION ON AN APPLIED VEHICLE. DIAGNOSE BY EVALUATING THE U JOINT WITH THE PROPELLER SHAFT REMOVED. REPLACE THE U JOINT (JOURNAL/JOURNAL BEARINGS). *PE
NTB-09-1292010-04-07. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. NISSAN: VENT CONTROL VALVE REPLACEMENT. WHEN REPLACING THE EVAP CANISTER VENT CONTROL VALVE FOR REASON: USE THE ONE LISTED ON PAGE 2; FOR VENT CONTROL VALVE REPLACEMENT PROCEDURE, REFER TO THE APPROPRIATE SECTION OF THE ELECTRONIC SERVICE MANUALS (ESM; WHEN INSTALLING THE NEW VALVE, DO NOT ADD ANY LUBE TO ITS O RING; FOR FRONTIER (D40 SERIES) ONLY, INSTALL THE PROTECTOR LISTED IN PARTS INFORMATION. *PE INCLUDES 2005-09 FRONTIER. UPDATED 12/8/10. *PE

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.