WenmarOpen by Wenmar Pro

Recalls that may apply to the 2008 Nissan Armada

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

By component

United States: NHTSA, as of 2026-10-19
23V0670002023-02-10. AIR BAGS:FRONTAL. Nissan North America, Inc. (Nissan) is recalling certain 2008-2011 Titan, Frontier, Xterra, Pathfinder, Armada, and 2008-2009 Quest vehicles. The resin emblem on the driver's air bag cover may develop cracks and detach during air bag deployment.
10V3490002010-07-22. AIR BAGS:SIDE/WINDOW. NISSAN IS RECALLING MODEL YEAR 2008 NISSAN ARMADA AND INFINITI QX56 VEHICLES MANUFACTURED FROM FEBRUARY 7, 2007 THROUGH FEBRUARY 14, 2007. THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 201, "PROTECTION IN INTERIOR IMPACT." AN OUT-OF-SPECIFICATION A-PILLAR FINISHER MIGHT IMPEDE THE CORRECT INFLATION OF THE SIDE CURTAIN AIR BAG NEAR THE UPPER PORTION OF THE B-PILLAR. Built 2007-02-07 to 2007-02-14.
10V0740002010-03-03. FUEL SYSTEM, OTHER:STORAGE:FUEL GAUGE SYSTEM. NISSAN IS RECALLING CERTAIN MODEL YEAR 2005-2009 TITAN, ARMADA, AND INFINITI QX56 VEHICLES. THE INSTRUMENT PANEL FUEL GAUGE MAY INACCURATELY DISPLAY THAT THE VEHICLE STILL HAS SOME FUEL, TYPICALLY ABOUT ONE QUARTER TANK, WHEN THE FUEL TANK IS EMPTY.
10V0720002010-03-02. SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES. NISSAN IS RECALLING CERTAIN MODEL YEAR 2008-2010 TITAN, ARMADA, AND INFINITI QX56, AND MODEL YEAR 2008-2009 NISSAN QUEST VEHICLES. THE BRAKE PEDAL PIVOT PIN END WAS NOT SPIN-FORMED TO SPECIFICATION DURING THE MANUFACTURING PROCESS OF THE BRAKE PEDAL ASSEMBLY. THE PIVOT PIN COULD SLIDE AND CAUSE THE BRAKE PEDAL TO PARTIALLY DISENGAGE FROM THE BRAKE PEDAL BRACKET. Built 2007-02-07 to 2009-12-14.
08V1870002008-04-24. SEATS. NISSAN IS RECALLING 1,126 MY 2008 QUEST, TITAN AND ARMADA VEHICLES EQUIPPED WITH MANUAL ADJUSTMENT FRONT SEATS. THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 207, "SEATING SYSTEMS." THE SEAT TRACK ASSEMBLY MAY HAVE BEEN MANUFACTURED OUT OF SPECIFICATION. Built 2008-01-28 to 2008-02-12.
07V4490002007-09-25. SEAT BELTS:REAR/OTHER. CERTAIN SPORT UTILITY VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 210, 'SEAT BELT ASSEMBLY ANCHORAGES.' THE DRIVER'S SIDE THIRD ROW SEAT BELT UPPER ANCHOR BRACKET MAY BE CRACKED. Built 2007-04-03 to 2007-05-02.
Canada: Transport Canada, as of 2026-10-19
20230532023-02-10. Airbag. Issue: On certain vehicles, the plastic emblem on the steering wheel airbag cover could detach and become a projectile when the airbag inflates in a crash. Note: This recall is for certain vehicles that had the steering wheel airbag replaced. Safety Risk: Projectiles in the occupant compartment could increase the risk of an injury. Corrective Actions: Nissan will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the steering wheel airbag cover.
20230522023-02-10. Airbag. Issue: On certain vehicles, the plastic emblem on the steering wheel airbag cover could detach and become a projectile when the airbag inflates in a crash. Safety Risk: Projectiles in the occupant compartment could increase the risk of an injury. Corrective Actions: Nissan will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the steering wheel airbag cover.
20121562012-04-11. Label. Certain vehicles fail to comply with the requirements of Canada Motor Vehicle Safety Standard 210.1 - User-ready Tether Anchorages for Restraint Systems. Specifically, the pictograms identifying the location of the tether anchors measure 15 mm in height instead of 20 mm as required by the Standard. Correction: Since this non-compliance condition does not pose any safety risk, no corrective action is required.
20100622010-03-03. Brakes. On certain vehicles, the brake pedal pivot pin end was not properly manufactured. As a result, the pin may not remain in place, causing the brake pedal to partially disengage from the brake pedal bracket. If this occurs, the driver will experience unusual and noticeable looseness in the pedal and a reduction in braking force. A reduction in braking force may lead to increased stopping distances and the risk of a crash causing property damage, personal injury or death. Correction: Owners of all potentially affected vehicles will be contacted and their brake pedal assembly will be inspected and replaced if necessary.
20100602010-03-02. Fuel System. On certain vehicles, the material used on fuel level sending unit contacts can wear and contaminate the sender. This causes the instrument panel fuel gauge to display that the vehicle still has some fuel left in the tank when the fuel tank is empty. An inaccurate fuel gauge can lead to engine stalling while driving, which may increase the risk of a crash causing property damage, personal injury or death. Correction: Letters will be sent to owners in two stages. The first letter will advise owners of fuel gauge inaccuracy and recommend maintaining a fuel level above the one half position. The second letter will follow, requesting owners bring their vehicles to a dealer for replacement of the fuel sender unit.
20073112007-09-25. Seats And Restraints. On certain vehicles, the third row left outboard seat belt shoulder harness anchor may fail to comply with strength requirements of CMVSS 210. As a result, the seat belt may not properly restrain seat occupants during a vehicle crash, increasing the risk of personal injury or death. Correction: Dealers will replace the 3rd row left outboard seat belt shoulder harness anchor.

A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.

Check one vehicle officially

Contains information licensed under the Open Government Licence – Canada.