Service bulletins for the 2019 Mitsubishi Outlander
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
143 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
| TSB1942A001 | 2019-04-22. Service bulletin. STRUCTURE:BODY:TAILGATE; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; STRUCTURE:BODY:TAILGATE:HINGE AND ATTACHMENTS. This is a Technical Service Bulletin sent to dealers. This bulletin instructs dealers to replace both tailgate gas springs with the countermeasure parts when a customer reports a noise generating from the tailgate gas springs when opening and closing the tailgate. This noise may occur when the high sliding friction of the oil seal of the tailgate gas springs cases a stick-slip condition during expansion or contraction. |
|---|---|
| TSB1954001REV | 2019-04-22. Service bulletin. ELECTRICAL SYSTEM; ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This is a Technical Service Bulletin sent to dealers. This bulletin instructs dealers to reprogram the BMU (for affected i-MiEV vehicles) or sub-BMU (for affected Outlander PHEV vehicles) with updated software to correct an isolation error when using the ABB quick charger. The isolation error may be detected by the charger, causing the charging process to stop approximately 2 minutes after charging has started. This bulletin supersedes TSB-19-54-001, issued February, 2019, to add i-MiEV vehicles, and instructions for reprogramming the BMU with updated software. |
| TIN-19-37-001 | 2019-03-18. Service bulletin. WHEELS; STEERING. This is a Technical Information Notice, sent to dealers, informing them that they must submit required documents and photographs when performing a wheel alignment check and adjustment on an affected vehicle with a customer concern of pulling/drifting and/or steering wheel off-center concerns (while under warranty). This Notice supersedes TIN-17-37-001 released in July, 2017, to expand affected models and model years. |
| TSB-19-54-001 | 2019-03-18. Service bulletin. ELECTRICAL SYSTEM. This is a Technical Service Bulletin sent to dealers. This bulletin instructs dealers to reprogram the sub-BMU with updated software to correct an isolation error when using the ABB quick charger. The isolation error may be detected by the charger, causing the charging process to stop approximately 2 minutes after charging has started. |
| TSB-19-35-002 | 2019-02-19. Service bulletin. SERVICE BRAKES. This is a Technical Service Bulletin that was sent to dealers. This bulletin instructs dealers to how to fix a condition of a metallic knocking sound coming from the rear brakes. Affected vehicles experience this condition when the brake is applied while driving at low speeds, or on driving on uneven roads. Dealers are instructed to replace the rear brake pad clips (upper and lower) with new parts on affected vehicles, and to apply grease between the brake pad and caliper support. |
| TSB-19-42B-001 | 2019-02-19. Service bulletin. LATCHES/LOCKS/LINKAGES; EQUIPMENT:ELECTRICAL. This is a Technical Service Bulletin that was sent to dealers. This bulletin instructs dealers how to re-register vehicle keys for affected vehicles. Affected vehicles may experience a condition of the door(s) inability to be locked or unlocked using the Remote Keyless Entry (RKE) function. Dealers are instructed to re- register the ley using "Customer Key Programming" procedure in the Owner's Manual. This bulletin also provides Summary Table for Function Customization & Key Programming. |
| TSB-18-42A-004 | 2019-02-19. Service bulletin. EQUIPMENT. This is a Technical Service Bulletin that was sent to dealers. The bulletin updates the Body section of the affected Service Manuals to add the type of the hood latch mounting bolt and to correct the tightening torque for the hood. |
| TSB-18-13-003 | 2019-02-19. Service bulletin. ELECTRICAL SYSTEM. This is a Technical Service Bulletin sent to dealers. The bulletin instructs dealers to confirm a list of specific Diagnostic Trouble Codes (DTCs) if vehicle experiences the following symptoms in cold weather: the check engine light illuminating with a limited vehicle speed (failsafe mode), or the engine does not restart after driving a short distance and stopping the engine for a few minutes. Once symptoms and DTCs are confirmed, dealers should replace the following relays with anti- freezing types: ETV, A/T (CVT), injector, and starter. |
| TIN-18-00-011 | 2019-02-19. Service bulletin. EQUIPMENT. This is a Technical Information Notice sent to dealers. The notice informs dealers that two questionnaire forms have been made available on Mitsubishi Dealer Link (MDL). The questionnaires are to identify how two frequent repairs (loss of Key Fob registration and tire/wheel imbalance) are happening. Mitsubishi Motors North America (MMNA) is requesting dealers to complete the appropriate questionnaire during the customer interview process. |
| TSB1800018 | 2019-01-07. Service bulletin. EQUIPMENT. This is a Technical Service Bulletin sent to dealers. This bulletin contains important new model service information and features for the 2019 Outlander PHEV. |
| TSB1800017 | 2019-01-07. Service bulletin. EQUIPMENT. This is a Technical Service Bulletin, containing 2019 Outlander PHEV technical specifications, that was sent to dealers. |
| TSB1800016 | 2019-01-07. Service bulletin. EQUIPMENT. This is a Technical Service Bulletin sent to dealers. It contains Pre-Delivery Inspection (PDI) procedures that dealers must perform when preparing subject vehicles for sale and delivery. |
| TSB1800011 | 2018-11-19. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This is a Technical Service Bulletin sent to dealers. This bulletin informs dealers that it supersedes TSB-17-00-012, issued December, 2017, to add a step to the Pre-Delivery Inspection (PDI) process for California dealers only. The additional step is installation of a Prop 65 Label during the Final Delivery Preparation. |
| TSB-18-00-010 | 2018-10-15. Service bulletin. EQUIPMENT. This is a Technical Service Bulletin sent to dealers. This bulletin contains important new model service information and features for the 2019 Outlander Sport. |
| TSB-18-00-009 | 2018-10-15. Service bulletin. EQUIPMENT. This is a Technical Service Bulletin, containing 2019 Outlander Sport technical specifications, that was sent to dealers. |
| TSB1800004REV | 2018-10-09. Service bulletin. EQUIPMENT:OTHER:LABELS. This is a Technical Service Bulletin sent to dealers. This bulletin informs dealers that it supersedes TSB-18-00-004, issued July, 2018, to add a step to the Pre-Delivery Inspection (PDI) process for California dealers only. The additional step is installation of a Prop 65 Label during the Final Delivery Preparation. |
| TSB1800008 | 2018-09-04. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. This is a Technical Service Bulletin sent to dealers. This bulletin contains important new model service information and features for the 2019 Outlander. |
| TSB1800007 | 2018-09-04. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. This is a Technical Service Bulletin, containing 2019 Outlander technical specifications, that was sent to dealers. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.