WenmarOpen by Wenmar Pro

Recalls that may apply to the 2005 Mitsubishi Endeavor

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

By component

United States: NHTSA, as of 2026-10-19
10V0650002010-02-25. FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP. MITSUBISHI IS RECALLING CERTAIN MODEL YEAR 2004-2010 ENDEAVOR VEHICLES ORIGINALLY SOLD IN OR CURRENTLY REGISTERED IN THE STATES OF CONNECTICUT, DELAWARE, ILLINOIS, INDIANA, IOWA, KENTUCKY, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, VIRGINIA, WEST VIRGINIA, WISCONSIN, AND WASHINGTON D.C. COLD STATES INCLUDE NORTH DAKOTA, SOUTH DAKOTA, NEBRASKA, KANSAS, OKLAHOMA, COLORADO, WYOMING, MONTANA, IDAHO, WASHINGTON, OREGON, AND UTAH. ADJOINING STATES INCLUDE ARKANSAS, TENNESSEE, AND NORTH CAROLINA. IN SEVERE CORROSIVE ENVIRONMENTS WHERE ROAD SALTS ARE FREQUENTLY USED IN WINTER VEHICLES MAY BE EXPOSED TO ROAD DEBRIS (MUD) MIXED WITH ROAD SALT. THIS MATERIAL CAN BECOME TRAPPED BETWEEN A REINFORCING BRACKET AND THE FUEL FILLER PIPE, POTENTIALLY CAUSING CORROSION. OVER TIME, CORROSION COULD CREATE A LEAK IN THE FUEL FILLER PIPE THAT COULD RESULT IN A FUEL LEAKAGE WHEN FUELING THE VEHICLE.
08V4540002008-09-09. FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY. MITSUBISHI IS RECALLING 45,988 MY 2005-2007 ENDEAVOR, GALANT, ECLIPSE COUPE, AND MY 2007 ECLIPSE SPYDER VEHICLES. THE BRACKET THAT IS THE ATTACHMENT POINT FOR THE LEFT REAR FUEL TANK MOUNTING STRAP MAY HAVE BEEN IMPROPERLY FORMED DURING A METAL STAMPING PROCESS. THE PROCESS MAY HAVE CAUSED THE METAL TO HAVE A SPLIT IN THE AREA WHERE THE BOLT THAT HOLDS ONE OF THE TWO FUEL TANK STRAPS TO THE UNDERSIDE OF THE VEHICLE IS LOCATED. IN THE EVENT THE FUEL TANK IS FULL AND THE VEHICLE IS SUBJECT TO A SEVERE COLLISION, THE BRACKET MAY BREAK AND ALLOW THE FUEL TANK TO DROP DOWN, POSSIBLY CAUSING A FUEL LEAK. Built 2005-03-17 to 2007-02-28.
08V1390002008-03-26. ELECTRICAL SYSTEM:IGNITION. MITSUBISHI IS RECALLING 120,000 MY 2004-2006 ENDEAVOR PASSENGER VEHICLES. DURING VEHICLE USE, THE IGNITION KEY INTERLOCK CABLE (WHICH IS A COMPONENT OF THE INTERLOCK SYSTEM) MAY ALLOW THE INTERLOCKING CAM TO FALL FORWARD AND ALLOW THE IGNITION KEY TO BE REMOVED FROM THE IGNITION SWITCH WHEN THE GEARSHIFT MECHANISM IS NOT IN THE PARK POSITION.
06V0680002006-03-09. SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER. ON CERTAIN SPORT UTILITY VEHICLES, THE MATERIAL USED TO MANUFACTURE THE FRONT DISC BRAKE CALIPERS MAY BE BRITTLE DUE TO IMPROPER METALLURGY. Built 2005-04-18 to 2005-06-15.
05V4090002005-09-15. SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER. ON CERTAIN PASSENGER VEHICLES EQUIPPED WITH ANTI-LOCK BRAKES, THE BRAKE MASTER CYLINDER, WHICH CONTROLS THE FLUID PRESSURE TO THE VEHICLE'S BRAKES, MAY ALLOW BRAKE FLUID TO BYPASS INTERNALLY DURING STOPPING. Built 2005-05-25 to 2005-07-13.
05V0690002005-03-02. PARKING BRAKE. ON CERTAIN SPORT UTILITY VEHICLES, THE PARKING BRAKE PEDAL CABLE LOCK NUT MAY NOT HAVE BEEN TIGHTENED TO THE PROPER TORQUE SPECIFICATION. THE LOCK NUT MAY LOOSEN AND COME OFF, WHICH WILL REDUCE THE EFFECTIVENESS OF THE PARKING BRAKE. Built 2004-03-11 to 2005-01-07.
Canada: Transport Canada, as of 2026-10-19
20110122011-01-10. Fuel System. Certain vehicles, operated in areas where road salts are frequently used in winter, may be exposed to road debris (mud) mixed with road salt. This material can become trapped between a reinforcing bracket and the fuel filler pipe, potentially causing corrosion. Over time, corrosion could create a leak in the fuel filler pipe that could result in fuel leakage when fueling the vehicle. Fuel leakage, in the presence of an ignition source, could result in a fire causing property damage and/or personal injury. Correction: Dealers will replace the fuel filler pipe of vehicles equipped with the first-generation version. Vehicles assembled with the second-generation filler pipe will be inspected and, if severe corrosion on the fuel filler pipe is observed, the pipe will be replaced with a third-generation version. For vehicles where corrosion of the fuel filler pipe is not observed, an anti-corrosion wax-like material will be applied to the filler pipe, and the inner wheel well shield will be replaced with an updated part that provides improved protection against mud intrusion and accumulation. ** Note: This recall supersedes recall 2010050.**
20083742008-10-10. Other. On certain vehicles, the bracket that is the anchor point for the left rear fuel tank mounting strap may have been improperly formed during the manufacturing process. This may have caused the metal to spilt in the area where the bolt holds the fuel strap to the underside of the vehicle. In the event the tank is full of fuel and the vehicle is involved in a serious collision the bracket could break and the tank could drop down. This situation could result in a fuel leak and the possibility of a fire. Correction: Dealers will inspect and if necessary install a reinforcement cap to the fuel tank bracket.
20081002008-03-25. Other. On certain vehicles, the ignition key interlock cable may allow the interlocking cam to fall forward and allow the ignition key to be removed from the ignition when the gearshift mechanism is not in the PARK position. If the driver does not shift to PARK before removing the key, and fails to engage the parking brake, the vehicle could roll and a crash could occur. This could result in property damage, personal injury or death. Correction: Dealers will affect repairs.
20060562006-03-09. Brakes. On certain vehicles, the metal used to manufacture the front disc brake caliper may be brittle due to improper metallurgy. This could lead to breakage of the brake caliper and subsequent unexpected partial loss of braking force. Unexpected partial loss of braking force could result in a vehicle crash. Correction: Dealers will inspect and, if required, replace the front brake calipers.
20052682005-09-16. Brakes. On certain vehicles, the brake master cylinder was improperly assembled which can result in reduced braking pressure and increase brake pedal stroke. Should this condition occur, the braking distance required to stop the vehicle will increase and may lead to a vehicle crash. Correction: Dealers will replace the brake master cylinder.
20050472005-02-25. Brakes. On certain vehicles, the parking brake pedal cable lock nut may not have been tightened to the proper torque specification during assembly. The lock nut may loosen and come off, which will reduce the effectiveness of the parking brake. This condition could allow the vehicle to roll if the automatic transmission is not placed into the PARK position. Correction: Dealers will tighten the lock nut.

A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.

Check one vehicle officially

Contains information licensed under the Open Government Licence – Canada.