WenmarOpen by Wenmar Pro

Recalls that may apply to the 1995 Mercury Villager

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

By component

United States: NHTSA, as of 2026-10-19
00V4190022001-01-02. FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY. VEHICLE DESCRIPTION: MINIVANS. THE FUEL TANK VENT HOSE ALLOWS AIR TO VENT FROM THE FUEL TANK DURING REFUELING. CRACKS HAVE DEVELOPED IN THE VENT HOSE. IF (1) THE FUEL TANK IS OVERFILLED, NOT ALLOWING EXCESS FUEL IN THE VENT HOSE TO FLOW BACK INTO THE TANK, (2) THE VEHICLE IS DRIVEN ONLY A SHORT DISTANCE AFTER REFUELING AND, (3) THERE IS SUBSEQUENTLY SIGNIFICANT HEATING OF THE FUEL TANK, THE FUEL IN THE TANK CAN EXPAND INTO THE VENT HOSE AND LEAK FUEL. Built 1991-11-26 to 1998-06-26.
96V2530031998-08-17. EXTERIOR LIGHTING:TAIL LIGHTS. THE REAR LAMP SOCKET MAY NOT ILLUMINATE BECAUSE THE METAL CAN IN THE LAMP SOCKET MOVES OR SEPARATES FROM THE PLASTIC SOCKET HOUSING. Built 1994-04-15 to 1996-09-15.
96V0890011996-06-03. SEATS. AN OUT-OF-SPECIFICATION CONDITION IN THE SEAT CABLE ROLLER PULLEY ASSEMBLY CAN ALLOW THE CABLE THAT CONNECTS THE SEAT ADJUST LEVER TO THE LATCH TO BE PINCHED IN THE ROLLER ASSEMBLY. Built 1995-07-01 to 1995-08-01.
Canada: Transport Canada, as of 2026-10-19
20010252001-02-09. Fuel System. On certain vehicles, cracks could develop in the fuel vent hose. If (1) the fuel tank is overfilled, not allowing excess fuel in the vent hose to flow back into the tank, (2) the vehicle is driven only a short distance after refueling and, (3) there is subsequently significant heating of the fuel tank, the fuel in the tank can expand into the vent hose and leak fuel. Fuel leakage in the presence of an ignition source can result in a fire. Correction: Fuel tank vent hose will be replaced.
19970121997-01-21. Lights And Instruments. A REAR LAMP ON THESE VEHICLES MAY NOT ILLUMINATE BECAUSE THE METAL CAN IN THE LAMP SOCKET MOVES OR SEPARATES FROM THE PLASTIC SOCKET HOUSING. THIS CAN RESULT IN THE STOP/TAIL COMBINATION LAMP OR THE TURN SIGNAL LAMP NOT FUNCTIONING. THE CENTER HIGH MOUNTED STOP LAMP OPERATION IS NOT AFFECTED. CORRECTION: BOTH REAR LAMP SOCKET ASSEMBLIES WILL BE REPLACED WITH AN IMPROVED ASSEMBLY.
19961031996-07-11. Seats And Restraints. THESE VEHICLES MAY NOT COMPLY WITH C.M.V.S.S. 207 - ANCHORAGE OF SEATS AND 210 - SEAT BELT ASSEMBLY ANCHORAGES. CERTAIN SEAT ANCHORAGES ARE ATTACHED TO THE THIRD SEAT. THE SLIDING SEAT LATCH ON THIS SEAT MAY NOT FULLY ENGAGE AND THEREFORE THE SEAT MAY NOT SUSTAIN THE LOADS SPECIFIED IN THE STANDARDS. CORRECTION: THE ROLLER ASSEMBLY IN THE THIRD ROW SEAT ACTUATOR ASSEMBLY WILL BE REPLACED.

A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.

Check one vehicle officially

Contains information licensed under the Open Government Licence – Canada.