Recalls that may apply to the 1984 Mercury Capri
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
By component
| 92V063000 | 1992-04-29. SEAT BELTS:FRONT:ANCHORAGE. THE PLASTIC SLEEVE IN THE FRONT SAFETY BELT TONGUE ASSEMBLY WHICH RETAINS THE LOCK BAR CAN DETERIORATE FROM PROLONGED EXPOSURE TO SUNLIGHT AND BECOME DISPLACED, CAUSING THE TONGUE TO DETACH FROM THE SAFETY BELT WEBBING. Built 1983-09-01 to 1985-08-01. |
|---|---|
| 84V119000 | 1984-10-02. FUEL SYSTEM, GASOLINE:CARBURETOR SYSTEM. THE SECONDARY THROTTLE SHAFT MAY, WITH ACCUMULATED MILEAGE, BECOME CONTAMINATED AND MAY STICK IN A PARTIALLY OPEN POSITION WHILE DRIVING. Built 1983-08-01 to 1984-03-01. |
| 83V134000 | 1983-12-20. SEAT BELTS:FRONT:ANCHORAGE. THE BOLTS THAT ATTACH THE D-SHAPED RING FOR THE SHOULDER BELT ARE INADEQUATELY SUPPORTED BY THE MATERIAL IN WHICH THEY ARE MOUNTED. THE ATTACHMENT DOES NOT COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 210, "SEAT BELT ASSEMBLY ANCHORAGES". Built 1983-08-01 to 1983-12-01. |
| 1992117 | 1992-09-28. Seats And Restraints. PROLONGED EXPOSURE TO SUNLIGHT MAY CAUSE THE FRONT SEAT BELT TONGUE ASSEMBLY PLASTIC SLEEVE THAT RETAINS THE LOCK BAR TO DETERIORATE AND BECOME DISPLACED. THIS COULD POTENTIALLY RESULT IN THE TONGUE BECOMING DETACHED FROM THE SEAT BELT WEBBING MAKING THE SEATBELT USELESS TO THE VEHICLE OCCUPANT. CORRECTION: OWNERS WILL BE ADVISED THAT FORD WILL REPAIR SEAT BELTS EXPERIENCING THIS CONDITION. |
|---|---|
| 1984117 | 1984-09-28. CARBURETOR THROTTLE SHAFTS MAY BE SUSCEPTIBLE TO DIRT CONTAMINATION AND WEAR OF THE BEARING COATINGS. THIS COULD CAUSE THE SECONDARY THROTTLE PLATES TO REMAIN PARTIALLY OPEN AFTER THE DRIVER HAS RELEASED THE ACCELERATOR PEDAL. THIS THIS WERE TO OCCUR, ENGINE SPEED WOULD NOT RETURN TO IDLE POTENTIALLY AFFECTING VEHICLE CONTROL AND STOPPING DISTANCES. |
| 1983114 | 1983-12-17. THE UPPER TORSO RESTRAINT D-RING WHICH ATTACHES THE SHOULDER BELT TO THE B PILLAR, UNDER CERTAIN TEST CONDITIONS, SEPARATED FROM ITS ANCHORAGE, AND MAY NOT COMPLY WITH CMVSS 210 - BELT ANCHORAGE. |
A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.