Service bulletins for the 2025 Mercedes-Benz Sprinter
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
39 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
Only bulletins with component: Body and frame are shown. Show all
| LI80.20-N-079697 | 2026-07-02. Service bulletin. STRUCTURE:BODY. Acoustic Warning or message occurring when a closed sliding door is not recognized Complaint Customer may state the warning message or indicator accompanied by acoustic tone alerting the sliding door is ajar when the door is completely closed Cause There are several reasons that lead to the failure occurring: - Mechanical damage through bending when loading and unloading - Worn contact plates --> After detachment of silver plating, the coper plate is corroded - Movement of sliding door/body when driving --> Contact pins do not always make contact with contact plate --> Central locking system fault message in instrument cluster Remedy In a problem case, replace contact switch for vehicles with +T50/+T55/+EL9 or contact plate with A4478201903. Remember to check the fit of the sliding doors and make any necessary adjustments as per AR72.16-S-1023E (447/448) and AR72.16-D-1023TS (907/910). Further valid damage codes: 82326 Contact switch for central locking system on sliding door 82347 Contact plate for central locking system on sliding door 53196 K/Z contact plate for central locking system on sliding door 82645 Contact switch for sliding door |
|---|---|
| LI91-18-N-080032 | 2026-05-02. Service bulletin. STRUCTURE:BODY. Complaint Crease formation on genuine leather seat covers in vehicles with low mileage Cause • objects left on the seats for extended periods of time (pressure marks) • objects wedged between the seat backrest and seat cushion (e.g. seat belt buckle) • light initial creases due to vehicle handling • light creases in the outer covers originating from the production process (missing finish) Remedy Heat treatment of the seat covers using heat gun and plastic wedge (Please see provided video) |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.