WenmarOpen by Wenmar Pro

Service bulletins for the 2018 Mercedes-Benz Sprinter

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

59 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Electrical system are shown. Show all

Bulletins, newest first
LI00.19-N-0757492023-02-03. Service bulletin. ELECTRICAL SYSTEM. Complaint Various issues including control unit programming procedure will not complete successfully/no newer software found, communication faults, or sporadic malfunction of systems. Cause Aftermarket CAN device could be installed into the vehicle's CAN network. Such devices can be but are not limited to, remote start modules, CAN blockers, or high idle modules. Remedy A successful control unit programming session cannot be ensured while aftermarket devices are connected to the vehicle's CAN network. Some of the device companies supply a bypass to allow control unit programming.
LI54.21-N-0752962022-10-05. Service bulletin. ELECTRICAL SYSTEM. Complaint Customer purchased pre-owned MY18-21 ex-Amazon Sprinter (SA code Z3A) and does not want Amazon specific Parameterizable Special Module (PSM) functions (driver alert, idle shutdown, radio mute, etc). IMPORTANT NOTES: • Digital rear view display will no longer operate after Amazon specific PSM software is removed! • MY18 will show the reverse camera image on the Audio 15 screen. • MY19-21 will lose reverse camera functionality completely! Cause Strategic fleet customer removed the OEM rear view mirror with integrated reverse camera display to install an aftermarket digital rear view display that gets its power supply and reverse signal from PSM. When the Amazon-specific PSM software is removed, the aftermarket digital rear view display no longer has a power supply or reverse signal supplied by the PSM. It is not possible for the OEM PSM software to provide a power supply or reverse signal to the aftermarket digital rear view display. Remedy 1. Notify customer the aftermarket digital rear view display will not operate after PSM software is updated, AND: Reverse camera image will be displayed on the Audio 15 screen (MY18 ONLY) OR Aftermarket digital rear view display must be replaced with the OEM rear view mirror with integrated reverse camera display (MY19-21). 2. Perform software update of Parameterizable Special Module (PSM) using XENTRY > Adaptations > Control Unit Update > Updating of control unit software. This will remove fleet-specific PSM software and load the OEM PSM software from VeDoc. 3. MY19-21: Remove aftermarket rear view display and install OEM rear view mirror with integrated reverse camera display.
LI54.22-N-0740632022-01-06. Service bulletin. ELECTRICAL SYSTEM. Various complaints due to aftermarket OBDII device installed
LI00.30-N-0741182022-01-06. Service bulletin. ELECTRICAL SYSTEM. "The “monitor status this driving cycle (PID 41)” can be displayed as “disabled” in the generic scan tool although no monitor of this group is disabled "
20170300042021-03-01. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM; EQUIPMENT. Replace 3rd brake lamp, remove soft top compartment cover to access.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.